Re: 2.6.14-rc2-mm2

[Badari Pulavarty <pbadari@gmail.com>]

On Fri, 2005-09-30 at 07:36 -0700, Martin J. Bligh wrote:
> Hangs on boot on x86_64 (-mm1 did the same, -git8 is fine)
> 
> http://test.kernel.org/13722/debug/console.log
> 
> eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:09:3d:00:c9:fe
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
> eth0: dma_rwctrl[769f0000]
> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 26 (level, low) -> IRQ 21
> eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:09:3d:00:c9:ff
> eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
> eth1: dma_rwctrl[769f0000]
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> AMD8111: IDE controller at PCI slot 0000:00:07.1
> AMD8111: chipset revision 3
> AMD8111: not 100% native mode: will probe irqs later
> AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
>     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
>     ide1: BM-DMA at 0x1008-0x100f<4>logips2pp: Detected unknown logitech mouse model 0
> , BIOS settings: hdc:DMA, hdd:pio
> input: PS/2 Logitech Mouse on isa0060/serio1
> -- 0:conmux-control -- time-stamp -- Sep/29/05 15:38:00 --

I ran into the same issue earlier on my AMD box and 
found out that

x86_64-no-idle-tick.patch 

is causing the problem with IDE drives. No idea why.
Can you back out x86_64-no-idle-tick* patches and
try ?

Thanks,
Badari

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/