Re: RocketPoint 1520 [hpt366] fails clock stabilization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Gwe, 2005-09-30 at 02:33 -0700, Loren M. Lang wrote:
> I booted FreeBSD 6.0 and it seemed to reconize the card and attached
> hard drive ok.  In the dmesg for freebsd, it mentioned 372N, if that
> means anything.  There is a patch, I discovered, which disables the

Yes - it means its the older card with a 372N on it.

> seg faulting when it failed to detect my chip, and I disabled a check
> for the 372N chipset.

Which means you are misclocking the IDE drive. I need to work out why
the PLL failed.

What does it report for FREQ and PLL if you boot 2.6.13.something on
it ?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux