Luben Tuikov wrote:
Ideally SATL is just a _data transformation function_ and
getting to the ATA device is transport dependent.
Incorrect. It needs to issue multiple ATA commands to emulate a single
SCSI command, cache some state, and other details. Not purely data
transformation.
Jeff, would you be accepting patches?
Yes. That's what I mean when I say "submit patches".
No, not true. It _integrates_ with SCSI Core. The sad truth
is that SCSI Core knows only HCIL.
That's something that needs fixing, for SAS.
Would you be accepting patches for the creation,
and use of "struct scsi_domain_device { ... }"?
This would be a "SCSI Device with a Z Port".
Z could be target or initiator (most likely just T).
Then for each scsi_domain_device, SCSI Core does
REPORT LUNS and then INQUIRY for each LU it found.
The old (current) code would still say as is, unchanged,
since it supports older, broken hardware.
Would you be accepting patches for this?
What needs to happen is that SPI-specific stuff in the SCSI core needs
to be moved to SPI-specific transport code.
Then all transports will be at an equal level, and the SCSI core will be
fully transport-agnostic.
I repeat again that I had this code _long_ before Christoph
ever dreamt up SAS. And he got my code via James B sometime
before OLS this year. I think he got it July 12, 2005.
The question is: why didn't _he_ use the solution already
available?
Because it has the problems listed time and again.
What problems when there was no other code around.
Look at it this way: _their_ code doesn't integrate
with ours. See?
I simply cannot take an argument like this:
"Because it has the problems listed time and again."
You have to be specific.
"time and again" means that we have been specific multiple times.
Re-read your emails from James and Christoph :)
The SAS transport class is designed to support both firmware-based
devices like MPT, and non-firmware devices such as Adaptec.
No, it never has been. It is an _attribute_ exporting framework
only.
If you understood how different those architectures are,
you'd understand what I mean.
James is wrong here. The "transport class" in reality winds up as a
transport lib, in addition to simply exporting attributes.
There will always be functions that are common to a transport.
Christoph calls this "libsas", since software-driven SAS implementations
will share this transport code, but not necessarily all SAS
implementations (MPT, qla etc.).
Sure it might need patches -- send patches, work with people, rather
than ignoring existing work.
I do not _know_ how to consolidate the completely broken
"design" set forth by JB and company.
It is _completely_ not to SAM spec.
Not true. Just because SCSI core lacks an explicit "execute SCSI
command" RPC hook, does not imply that that capability is non-existent.
Stare at the Scsi_Host_Template some more and you'll see it.
Exporting attributes from MPT-based drivers is not the same
as managing a transport.
I repeat again:
* MPT _hides_ the transport and the managment
of the transport from you -- so in effect there is
nothing to manage.
* MPT gives you Logical Units to work with, NOT ever domain
devices or anyhing domain like.
* MPT gives you a SAM/SPC hook to hook _right_ into SCSI Core.
_This_ is why their LLDD _can_ use the host template.
But an AIC-94xx and BCM8603 _is_ NOT a scsi_host material. It is just
an interface to the interconnect.
A scsi_host is simply a container. You're being too literal.
To convince yourself of this: take a look at the _members_ of
the scsi host/scsi host template: nothing in that structure is
presented in the chip -- UNLIKE old Parallel SCSI device drivers.
The scsi host template was written to cater to _old_ (then new)
Parallel SCSI drivers! Times have changed! Time to evolve.
Yes. We need to evolve the SCSI core to separate out SPI-specific
pieces, to make it more transport-agnostic.
We've been over the technical stuff time and again. That's the
maintainer problem.
No we haven't been over the technical stuff time and again.
We need someone who will listen to the community.
I bet you're melting people's hearts when they read this.
So to summarize for corporate management what you're saying
here is:
- you're saying that I do not listen to "the community",
correct
- you're saying that I'm an _outsider_ to "the community",
irrelevant
- you're saying that I'm no good to work with you, since
you are part of that community but not me.
irrelevant
That is you cannot take it that someone will tell
"the community" anything. "The community" knows all and it
knows best.
So in effect there are no good and knowlegable engineers
anywhere but in the "Linux community".
That is there is no people with new ideas, better ideas,
innovative ideas, more knowlege about certain subject matter,
_anywhere_ but in the "Linux community".
So in effect, there will never be an "outsider" who will
come in to the "linux community" and change things around,
no fresh ideas, no better (right?) way to do things.
"The community" is not going to listen to anyone but only to
already politically established members on _any_ subject
matter, even technical, even from "outsiders" who work with
the technology every day.
overreaction
What _exactly_ does it mean "don't play well with others"?
It means not taking feedback, and working around rather than with the
SCSI core.
So does this mean, that if I submit patches "fixing" (oops,
not meant to hurt anyone's bal^w^w^wpride) SCSI Core, they
will be accepted.
James and Christoph have been asking you to submit patches for a long
time now.
Or do you want me to do "your way of SAS"?
Maybe JB et al, should write the "Linux SAS spec" and
then we can recommend this to T10.org, so they can scrap
their version and use "the community's"?
You're over-reacting.
Then you don't understand the ->qc_{prep,issue} hooks. That should get
you 90% of the way there, if not 99%.
But I have to simulate struct ata_port, Jeff.
Which isn't so bad, but speaks about the design.
You have to provide a means to submit ATA commands and receive results,
no more or less.
The code doesn't alter Linux SCSI or anyone else's behaviour.
It only _provides_ SAS support to the kernel.
That's one of the problems: It should update the SCSI core.
Thank you for admitting this -- you're the first and only
member of "the community" (since I'm not a member apparently)
to admit this.
James, Christoph and the rest of linux-scsi have been saying this over
and over again.
You need to update the SCSI core properly, rather than working around it.
Everybody knows the SCSI core is too SPI-centric, and you have been
given a recipe for fixing this.
Jeff
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |