Re: Infinite interrupt loop, INTSTAT = 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 28, 2005 at 10:05:08AM -0500, James Bottomley wrote:
> What was it doing before this?  i.e. what were all the messages from the
> card.  The message happens when the aic driver is unable to clear its
> pending workqueue after it suspends ... which is part of error recovery.
> So, what error was it trying to recover from?

Good question.  Here is a complete dmesg starting at the mount
/dev/sdb1 /ritel1 which crashes the system eventually (I did a dmesg -c
just before doing the mount):

ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
scsi1:0:0:0: Attempting to abort cmd ffff8101b1cdf880: 0x28 0x0 0x0 0xbc 0x0 0x3f 0x0 0x0 0x8 0x0
Infinite interrupt loop, INTSTAT = 0scsi1: At time of recovery, card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi1: Dumping Card State at program address 0x5 Mode 0x33
Card was paused
HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x33] SCSISIGI[0x24] SCSIPHASE[0x0] SCSIBUS[0x0] 
LASTPHASE[0x1] SCSISEQ0[0x40] SCSISEQ1[0x12] SEQCTL0[0x0] 
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x10] 
SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] 
SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x40] 

SCB Count = 4 CMDS_PENDING = 4 LASTSCB 0x1 CURRSCB 0x1 NEXTSCB 0xff00
qinstart = 146 qinfifonext = 146
QINFIFO:
WAITING_TID_QUEUES:
       0 ( 0x1 )
Pending list:
  1 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  2 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  3 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
  0 FIFO_USE[0x0] SCB_CONTROL[0x60] SCB_SCSIID[0x7] 
Total 4
Kernel Free SCB list: 
Sequencer Complete DMA-inprog list: 
Sequencer Complete list: 
Sequencer DMA-Up and Complete list: 

scsi1: FIFO0 Free, LONGJMP == 0x8252, SCB 0x1
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] 
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] 
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] 
LQIN: 0x8 0x0 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 
scsi1: LQISTATE = 0x1, LQOSTATE = 0x1a, OPTIONMODE = 0x52
scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
SIMODE0[0xc] 
CCSCBCTL[0x4] 
scsi1: REG0 == 0x1, SINDEX = 0x102, DINDEX = 0x102
scsi1: SCBPTR == 0x1, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff04
CDB 28 0 0 c8 0 3f
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
DevQ(0:0:0): 0 waiting
DevQ(0:0:1): 0 waiting
scsi1:0:0:0: Cmd aborted from QINFIFO

Abort on some timeout?

  OG.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux