Brett Russ wrote:
Some (non-functional) cleanup modifications since the version 0.10
driver I sent out 2005-08-30. Also adding signed-off-by for Jeff's
upstream push. This is my libata compatible low level driver for
the Marvell SATA family. Currently it successfully runs in PIO mode
on a 6081 chip. EDMA support is in the works and should be done
shortly. Review, testing (especially on other flavors of Marvell),
comments welcome.
Thank you,
BR
Signed-off-by: Brett Russ <[email protected]>
[snip..]
Please find attached patches that add the Adaptec 1420SA controller to
the PCI ID list in the driver, and a small note in the kernel config
option to state so. This is untested as of currently, if anyone has a
1420SA to try, that would be great.. The one I had access to is now
gone to a remote location out of reach for testing. I read in one
post I found with google, that the 1420SA uses a 6541 chip instead of
a 6041, but I am not able to verify this, and also don't know if it
may still work as a 6041. The card is still a Sata2, PCI-X card, with
4 ports, the same as the 6041 based cards. This patch may or may not
be useful.. The card comes with a manufacturer ID of 9005 according
to a linux PCI-ID list, which is a secondary id of Adaptec's known as
ADAPTEC2, and an actual PCI Id of 0241.
Signed-off-by: Tyler Guthrie <[email protected]>
--- linux-2.6.13.orig/drivers/scsi/Kconfig 2005-09-03
06:42:20.000000000 -0700
+++ linux-2.6.13drivers/scsi/Kconfig 2005-09-03 06:44:29.000000000
-0700
@@ -466,6 +466,8 @@
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] chips.
+ Also Including Adaptec 1420SA Card (using marvell chip
pci-id 0x0241).
+
If unsure, say N.
config SCSI_SATA_NV
--- linux-2.6.13.orig/drivers/scsi/sata_mv.c 2005-09-03
06:40:07.000000000 -0700
+++ linux-2.6.13/drivers/scsi/sata_mv.c 2005-09-03
06:39:47.000000000 -0700
@@ -286,6 +286,7 @@
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6041), 0, 0, chip_604x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6080), 0, 0, chip_608x},
{PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x6081), 0, 0, chip_608x},
+ {PCI_DEVICE(PCI_VENDOR_ID_ADAPTEC2, 0x0241), 0, 0, chip_604x},
{} /* terminate list */
};
Tyler.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
-------- Original Message --------
From: - Sun Sep 25 07:30:35 2005
Return-Path: <[email protected]>
Delivered-To: [email protected]
(Postfix) with ESMTP id 0C44938138 for <[email protected]>; Sun, 25 Sep
2005 16:25:31 +0200 (CEST)
Message-ID: <[email protected]>
Date: Sun, 25 Sep 2005 16:25:26 +0200
From: Jeroen <[email protected]>
To: [email protected]
Subject: Re: [PATCH 2.6.13] libata: Marvell SATA support (PIO mode)
X-Antivirus: AVG for E-mail 7.0.344 [267.11.6]
Hi,
I have just tested you patch and i can confirm that is work with the
adaptec 1420SA. If u would like any further information feel free to
contact me.
thanks
Jeroen
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.7/112 - Release Date: 9/26/2005
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|