Re: [PATCH/RFC] Enable HPET on VIA8237 southbridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Montag, 26. September 2005 17:49 schrieb Clemens Ladisch:
> Karsten Wiese wrote:
> > if you have that chip on your mainboard and want to play with it's
> > hpet, this might get you going.
> 
> I'm using similar code for my ICH5 southbridge, but I patched
> arch/i386/kernel/acpi/boot.c instead so that the kernel can use it
> for its own purposes.

The kernel uses the hpet here too with my patch.
Please send me your acpi/boot.c patch.

I guess you setup an ACPI_HPET entry, if none has been found?
Maybe your approach is safer/better, 'cause you can scan other ACPI
assigned Hardware addresses there.
> 
> > One exception: Timer1 says it can do PERIODIC mode,
> > but this doesn't work here. One shot is ok.
> 
> This may be because your patch doesn't initialize the interrupt
> routing registers (which would have been the BIOS' job).

No. Interrupt works fine (IRQ 8). Reliably @10000/s.

   Regards,
   Karsten

	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux