[PATCH 2.6.14-rc2] aoe [2/2]: use get_unaligned for possibly unaligned accesses in ATA id buffer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: "Ed L. Cashin" <[email protected]>

Use get_unaligned for possibly-unaligned multi-byte accesses to the
ATA device identify response buffer.

Index: 2.6.14-rc2-aoe/drivers/block/aoe/aoecmd.c
===================================================================
--- 2.6.14-rc2-aoe.orig/drivers/block/aoe/aoecmd.c	2005-09-26 12:27:49.000000000 -0400
+++ 2.6.14-rc2-aoe/drivers/block/aoe/aoecmd.c	2005-09-26 12:27:49.000000000 -0400
@@ -8,6 +8,7 @@
 #include <linux/blkdev.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
+#include <asm/unaligned.h>
 #include "aoe.h"
 
 #define TIMERTICK (HZ / 10)
@@ -314,16 +315,16 @@
 	u16 n;
 
 	/* word 83: command set supported */
-	n = le16_to_cpup((__le16 *) &id[83<<1]);
+	n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1]));
 
 	/* word 86: command set/feature enabled */
-	n |= le16_to_cpup((__le16 *) &id[86<<1]);
+	n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1]));
 
 	if (n & (1<<10)) {	/* bit 10: LBA 48 */
 		d->flags |= DEVFL_EXT;
 
 		/* word 100: number lba48 sectors */
-		ssize = le64_to_cpup((__le64 *) &id[100<<1]);
+		ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1]));
 
 		/* set as in ide-disk.c:init_idedisk_capacity */
 		d->geo.cylinders = ssize;
@@ -334,12 +335,12 @@
 		d->flags &= ~DEVFL_EXT;
 
 		/* number lba28 sectors */
-		ssize = le32_to_cpup((__le32 *) &id[60<<1]);
+		ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1]));
 
 		/* NOTE: obsolete in ATA 6 */
-		d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]);
-		d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]);
-		d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]);
+		d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1]));
+		d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1]));
+		d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1]));
 	}
 	d->ssize = ssize;
 	d->geo.start = 0;


-- 
  Ed L. Cashin <[email protected]>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux