--- linux.org/arch/i386/Kconfig 2005-09-23
09:27:06.000000000 +0200
+++ linux-2.6.13.2/arch/i386/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -43,6 +43,7 @@
config X86_PC
bool "PC-compatible"
+ autorule arch.sh "i386"
help
Choose this option if your computer is a standard
PC or compatible.
@@ -240,13 +241,15 @@
extensions.
config MPENTIUMM
- bool "Pentium M"
+ bool "Pentium(R) M"
+ autorule cpugrep.sh "Pentium(R) M"
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.
config MPENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ autorule cpugrep.sh "Pentium(R) 4"
help
Select this for Intel Pentium 4 chips. This
includes the
Pentium 4, P4-based Celeron and Xeon, and
Pentium-4 M
@@ -263,6 +266,7 @@
config MK7
bool "Athlon/Duron/K7"
+ autorule cpugrep.sh "Athlon"
help
Select this for an AMD Athlon K7-family processor.
Enables use of
some extended instructions, and passes appropriate
optimization
@@ -1146,6 +1150,7 @@
bool "PCI support" if !X86_VISWS
depends on !X86_VOYAGER
default y if X86_VISWS
+ autorule hw_grep.sh "PCI bridge"
help
Find out whether you have a PCI motherboard. PCI
is the name of a
bus system, i.e. the way the CPU talks to the
other stuff inside
--- linux.org/sound/Kconfig 2005-09-23
09:27:39.000000000 +0200
+++ linux-2.6.13.2/sound/Kconfig 2005-09-24
11:55:41.000000000 +0200
@@ -5,6 +5,7 @@
config SOUND
tristate "Sound card support"
+ autorule hw_egrep.sh "audio"
help
If you have a sound card in your computer, i.e. if
it can say more
than an occasional beep, say Y. Be sure to have
all the information
@@ -42,6 +43,7 @@
config SND
tristate "Advanced Linux Sound Architecture"
depends on SOUND
+ autorule hw_egrep.sh "audio"
help
Say 'Y' or 'M' to enable ALSA (Advanced Linux
Sound Architecture),
the new base sound system.
--- linux.org/drivers/usb/host/Kconfig 2005-09-23
09:27:25.000000000 +0200
+++ linux-2.6.13.2/drivers/usb/host/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -7,6 +7,7 @@
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on USB && PCI
+ autorule hw_grep.sh "EHCI"
---help---
The Enhanced Host Controller Interface (EHCI) is
standard for USB 2.0
"high speed" (480 Mbit/sec, 60 Mbyte/sec) host
controller hardware.
@@ -111,6 +112,7 @@
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
depends on USB && PCI
+ autorule hw_grep.sh "UHCI"
---help---
The Universal Host Controller Interface is a
standard by Intel for
accessing the USB hardware in the PC (which is
also called the USB
--- linux.org/drivers/usb/Kconfig 2005-09-23
09:27:25.000000000 +0200
+++ linux-2.6.13.2/drivers/usb/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -34,6 +34,7 @@
config USB
tristate "Support for Host-side USB"
depends on USB_ARCH_HAS_HCD
+ autorule hw_grep.sh "USB"
---help---
Universal Serial Bus (USB) is a specification for
a serial bus
subsystem which offers higher speeds and more
features than the
--- linux.org/drivers/ide/Kconfig 2005-09-23
09:27:12.000000000 +0200
+++ linux-2.6.13.2/drivers/ide/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -8,6 +8,7 @@
config IDE
tristate "ATA/ATAPI/MFM/RLL support"
+ autorule hw_egrep.sh "ATA|ATAPI|MFM|RLL"
---help---
If you say Y here, your kernel will be able to
manage low cost mass
storage units such as ATA/(E)IDE and ATAPI units.
The most common
@@ -135,6 +136,7 @@
config BLK_DEV_IDEDISK
tristate "Include IDE/ATA-2 DISK support"
+ autorule hw_egrep.sh "ATA|IDE"
---help---
This will include enhanced support for MFM/RLL/IDE
hard disks. If
you have a MFM/RLL/IDE disk, and there is no
special reason to use
@@ -167,6 +169,7 @@
config BLK_DEV_IDECD
tristate "Include IDE/ATAPI CDROM support"
+ autorule hw_egrep.sh "ATAPI|IDE"
---help---
If you have a CD-ROM drive using the ATAPI
protocol, say Y. ATAPI is
a newer protocol used by IDE CD-ROM and TAPE
drives, similar to the
@@ -333,6 +336,7 @@
config IDEPCI_SHARE_IRQ
bool "Sharing PCI IDE interrupts support"
depends on PCI && BLK_DEV_IDEPCI
+ autorule hw_egrep.sh "IDE|PCI"
help
Some ATA/IDE chipsets have hardware support which
allows for
sharing a single IRQ with other cards. To enable
support for
@@ -367,6 +371,7 @@
config BLK_DEV_GENERIC
tristate "Generic PCI IDE Chipset Support"
depends on BLK_DEV_IDEPCI
+ autorule hw_egrep.sh "IDE|PCI"
config BLK_DEV_OPTI621
tristate "OPTi 82C621 chipset enhanced support
(EXPERIMENTAL)"
@@ -398,6 +403,7 @@
config BLK_DEV_IDEDMA_PCI
bool "Generic PCI bus-master DMA support"
depends on PCI && BLK_DEV_IDEPCI
+ autorule hw_grep.sh "PCI"
---help---
If your PCI system uses IDE drive(s) (as opposed
to SCSI, say) and
is capable of bus-master DMA operation (most
Pentium PCI systems),
@@ -591,6 +597,7 @@
config BLK_DEV_PIIX
tristate "Intel PIIXn chipsets support"
+ autorule hw_grep.sh "ICH"
help
This driver adds explicit support for Intel PIIX
and ICH chips
and also for the Efar Victory66 (slc90e66) chip.
This allows
--- linux.org/drivers/net/Kconfig 2005-09-23
09:27:16.000000000 +0200
+++ linux-2.6.13.2/drivers/net/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -8,6 +8,7 @@
config NETDEVICES
depends on NET
bool "Network device support"
+ autorule hw_egrep.sh "Network|Ethernet"
---help---
You can say N here if you don't intend to connect
your Linux box to
any other computer at all.
--- linux.org/drivers/ieee1394/Kconfig 2005-09-23
09:27:12.000000000 +0200
+++ linux-2.6.13.2/drivers/ieee1394/Kconfig 2005-09-24
11:55:24.000000000 +0200
@@ -6,6 +6,7 @@
tristate "IEEE 1394 (FireWire) support"
depends on PCI || BROKEN
select NET
+ autorule hw_grep.sh "FireWire (IEEE 1394)"
help
IEEE 1394 describes a high performance serial bus,
which is also
known as FireWire(tm) or i.Link(tm) and is used
for connecting all
--- linux.org/drivers/char/agp/Kconfig 2005-09-23
09:27:10.000000000 +0200
+++ linux-2.6.13.2/drivers/char/agp/Kconfig 2005-09-25
21:54:11.000000000 +0200
@@ -1,6 +1,7 @@
config AGP
tristate "/dev/agpgart (AGP Support)" if !GART_IOMMU
depends on ALPHA || IA64 || PPC || X86
+ autorule hw_grep.sh "AGP"
default y if GART_IOMMU
---help---
AGP (Accelerated Graphics Port) is a bus system
mainly used to
@@ -46,6 +47,7 @@
config AGP_ATI
tristate "ATI chipset support"
depends on AGP && X86 && !X86_64
+ autorule hw_grep.sh "Radeon"
---help---
This option gives you AGP support for the GLX
component of
XFree86 4.x on the ATI RadeonIGP family of
chipsets.
--- linux.org/drivers/char/drm/Kconfig 2005-09-23
09:27:10.000000000 +0200
+++ linux-2.6.13.2/drivers/char/drm/Kconfig 2005-09-25
21:56:49.000000000 +0200
@@ -7,6 +7,7 @@
config DRM
tristate "Direct Rendering Manager (XFree86 4.1.0
and higher DRI support)"
depends on (AGP || AGP=n) && PCI
+ autorule hw_egrep.sh "Rage|Radeon|Banshee|Voodoo"
help
Kernel-level support for the Direct Rendering
Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you
need to select
@@ -41,6 +42,7 @@
config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI
+ autorule hw_grep.sh "Radeon"
help
Choose this option if you have an ATI Radeon
graphics card. There
are both PCI and AGP versions. You don't need to
choose this to
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |