Re: The system works (2.6.14-rc2): functional k8n-dl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23.09.2005 [10:08:16 -0700], Sean Bruno wrote:
> On Thu, 2005-09-22 at 17:29 -0400, Karim Yaghmour wrote:
> > Nish,
> > 
> > OK, I can confirm that with version 1006 of the BIOS it works flawlessly
> > with Linux. I was able to install full FC4 and boot without a problem
> > even with the SATA disk plugged to the nVidia controller (reading the
> > archives you will see that the nVidia SATA controller is something I
> > was simply unable to get working.) I didn't need to recompile anything.
> > The kernel that came with FC4 worked just fine.
> I can also confirm these findings.  However, I still have to boot the
> kernel with iommu=memaper=3 in order to get the system to work
> properly.  

You have 6GB of RAM, right? That must be the difference, as I only have
2 GB (and the IOMMU is used when you have more than 3 GB according to
menuconfig?).

Regardless, a better state now, I think?

Thanks,
Nish
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux