[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added ppc_sys device and system definitions for PowerQUICC I devices.
This will allow drivers for PQI to be proper platform device drivers. Currently sys section contains only MPC885 and MPC866. Identification should be done with identify_ppc_sys_by_name call, with board-specific "name" string passed, since PQI do not have any register that could identify the SOC.

Signed-off-by: Vitaly Bordug <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>
Signed-off-by: Marcelo Tosatti <[email protected]>


diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -34,7 +34,8 @@ ifeq ($(CONFIG_40x),y)
 obj-$(CONFIG_PCI)		+= indirect_pci.o pci_auto.o ppc405_pci.o
 endif
 endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y)
+obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
+				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
 ifeq ($(CONFIG_8xx),y)
 obj-$(CONFIG_PCI)		+= qspan_pci.o i8259.o
 endif
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -0,0 +1,224 @@
+/*
+ * arch/ppc/syslib/mpc8xx_devices.c
+ *
+ * MPC8xx Device descriptions
+ *
+ * Maintainer: Kumar Gala <[email protected]>
+ *
+ * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<[email protected]>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <linux/mii.h>
+#include <asm/commproc.h>
+#include <asm/mpc8xx.h>
+#include <asm/irq.h>
+#include <asm/ppc_sys.h>
+
+/* We use offsets for IORESOURCE_MEM to do not set dependences at compile time.
+ * They will get fixed up by mach_mpc8xx_fixup
+ */
+
+struct platform_device ppc_sys_platform_devices[] = {
+	[MPC8xx_CPM_FEC1] =	{
+		.name = "fsl-cpm-fec",
+		.id	= 1,
+		.num_resources = 2,
+		.resource = (struct resource[])	{
+			{
+				.name 	= "regs",
+				.start	= 0xe00,
+				.end	= 0xe88,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_FEC1,
+				.end	= MPC8xx_INT_FEC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_FEC2] =	{
+		.name = "fsl-cpm-fec",
+		.id	= 2,
+		.num_resources = 2,
+		.resource = (struct resource[])	{
+			{
+				.name	= "regs",
+				.start	= 0x1e00,
+				.end	= 0x1e88,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_FEC2,
+				.end	= MPC8xx_INT_FEC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SCC1] = {
+		.name = "fsl-cpm-scc",
+		.id	= 1,
+		.num_resources = 3,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa00,
+				.end	= 0xa18,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name 	= "pram",
+				.start 	= 0x3c00,
+				.end 	= 0x3c80,
+				.flags 	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SCC1,
+				.end	= MPC8xx_INT_SCC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SCC2] = {
+		.name = "fsl-cpm-scc",
+		.id	= 2,
+		.num_resources	= 3,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa20,
+				.end	= 0xa38,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name 	= "pram",
+				.start 	= 0x3d00,
+				.end 	= 0x3d80,
+				.flags 	= IORESOURCE_MEM,
+			},
+
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SCC2,
+				.end	= MPC8xx_INT_SCC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SCC3] = {
+		.name = "fsl-cpm-scc",
+		.id	= 3,
+		.num_resources	= 3,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa40,
+				.end	= 0xa58,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name 	= "pram",
+				.start 	= 0x3e00,
+				.end 	= 0x3e80,
+				.flags 	= IORESOURCE_MEM,
+			},
+
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SCC3,
+				.end	= MPC8xx_INT_SCC3,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SCC4] = {
+		.name = "fsl-cpm-scc",
+		.id	= 4,
+		.num_resources	= 3,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa60,
+				.end	= 0xa78,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name 	= "pram",
+				.start 	= 0x3f00,
+				.end 	= 0x3f80,
+				.flags 	= IORESOURCE_MEM,
+			},
+
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SCC4,
+				.end	= MPC8xx_INT_SCC4,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SMC1] = {
+		.name = "fsl-cpm-smc",
+		.id	= 1,
+		.num_resources	= 2,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa82,
+				.end	= 0xa91,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SMC1,
+				.end	= MPC8xx_INT_SMC1,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+	[MPC8xx_CPM_SMC2] = {
+		.name = "fsl-cpm-smc",
+		.id	= 2,
+		.num_resources	= 2,
+		.resource = (struct resource[]) {
+			{
+				.name	= "regs",
+				.start	= 0xa92,
+				.end	= 0xaa1,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "interrupt",
+				.start	= MPC8xx_INT_SMC2,
+				.end	= MPC8xx_INT_SMC2,
+				.flags	= IORESOURCE_IRQ,
+			},
+		},
+	},
+};
+
+static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
+{
+	ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
+	return 0;
+}
+
+static int __init mach_mpc8xx_init(void)
+{
+	ppc_sys_device_fixup = mach_mpc8xx_fixup;
+	return 0;
+}
+
+postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
new file mode 100644
--- /dev/null
+++ b/arch/ppc/syslib/mpc8xx_sys.c
@@ -0,0 +1,61 @@
+/*
+ * arch/ppc/platforms/mpc8xx_sys.c
+ *
+ * MPC8xx System descriptions
+ *
+ * Maintainer: Kumar Gala <[email protected]>
+ *
+ * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <[email protected]>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <asm/ppc_sys.h>
+
+struct ppc_sys_spec *cur_ppc_sys_spec; 
+struct ppc_sys_spec ppc_sys_specs[] = {
+	{
+		.ppc_sys_name	= "MPC86X",
+		.mask 		= 0xFFFFFFFF,
+		.value 		= 0x00000000,
+		.num_devices	= 2,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC8xx_CPM_FEC1,
+			MPC8xx_CPM_SCC1,
+			MPC8xx_CPM_SCC2,
+			MPC8xx_CPM_SCC3,
+			MPC8xx_CPM_SCC4,
+			MPC8xx_CPM_SMC1,
+			MPC8xx_CPM_SMC2,
+		},
+	},
+	{
+		.ppc_sys_name	= "MPC885",
+		.mask 		= 0xFFFFFFFF,
+		.value 		= 0x00000000,
+		.num_devices	= 3,
+		.device_list	= (enum ppc_sys_devices[])
+		{
+			MPC8xx_CPM_FEC1,
+			MPC8xx_CPM_FEC2,
+			MPC8xx_CPM_SCC1,
+			MPC8xx_CPM_SCC2,
+			MPC8xx_CPM_SCC3,
+			MPC8xx_CPM_SCC4,
+			MPC8xx_CPM_SMC1,
+			MPC8xx_CPM_SMC2,
+		},
+	},
+	{	/* default match */
+		.ppc_sys_name	= "",
+		.mask 		= 0x00000000,
+		.value 		= 0x00000000,
+	},
+};
diff --git a/include/asm-ppc/irq.h b/include/asm-ppc/irq.h
--- a/include/asm-ppc/irq.h
+++ b/include/asm-ppc/irq.h
@@ -138,6 +138,16 @@ irq_canonicalize(int irq)
 #define	SIU_IRQ7	(14)
 #define	SIU_LEVEL7	(15)
 
+#define MPC8xx_INT_FEC1		SIU_LEVEL1
+#define MPC8xx_INT_FEC2		SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
 /* The internal interrupts we can configure as we see fit.
  * My personal preference is CPM at level 2, which puts it above the
  * MBX PCI/ISA/IDE interrupts.
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -97,6 +97,22 @@ extern unsigned char __res[];
 
 struct pt_regs;
 
+enum ppc_sys_devices {
+	MPC8xx_CPM_FEC1,
+	MPC8xx_CPM_FEC2,
+	MPC8xx_CPM_I2C,
+	MPC8xx_CPM_SCC1,
+	MPC8xx_CPM_SCC2,
+	MPC8xx_CPM_SCC3,
+	MPC8xx_CPM_SCC4,
+	MPC8xx_CPM_SPI,
+	MPC8xx_CPM_MCC1,
+	MPC8xx_CPM_MCC2,
+	MPC8xx_CPM_SMC1,
+	MPC8xx_CPM_SMC2,
+	MPC8xx_CPM_USB,
+};
+
 #endif /* !__ASSEMBLY__ */
 #endif /* CONFIG_8xx */
 #endif /* __CONFIG_8xx_DEFS */
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -27,6 +27,8 @@
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)
 #include <asm/mpc52xx.h>
 #elif defined(CONFIG_MPC10X_BRIDGE)

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux