acpi oops, irq 14: nobody cared

[Patrizio Bassi <patrizio.bassi@gmail.com>]

Using 2.6.14-rc1 vanilla.
On my notebook acpi suspend works perfectly but i get:

Stopping tasks: =================|
Freeing memory... done (41592 pages freed)
ACPI: PCI interrupt for device 0000:00:01.4 disabled
ACPI: PCI interrupt for device 0000:00:01.3 disabled
ACPI: PCI interrupt for device 0000:00:01.2 disabled
swsusp: Need to copy 24667 pages
ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
eth0: Media Link Off
ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 5 (level, low) 
-> IRQ 5
ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 5 (level, low) 
-> IRQ 5
ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, low) 
-> IRQ 5
ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level, low) 
-> IRQ 5
ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level, low) 
-> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level, 
low) -> IRQ 11
ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKC] -> GSI 5 (level, low) 
-> IRQ 5
irq 14: nobody cared (try booting with the "irqpoll" option)
[<c013926a>] __report_bad_irq+0x2a/0x90
[<c0139390>] note_interrupt+0xa0/0x100
[<c0138d09>] __do_IRQ+0xa9/0xc0
[<c0105139>] do_IRQ+0x19/0x30
[<c0103a76>] common_interrupt+0x1a/0x20
[<c011e5ce>] __do_softirq+0x2e/0xa0
[<c011e666>] do_softirq+0x26/0x30
[<c010513e>] do_IRQ+0x1e/0x30
[<c0103a76>] common_interrupt+0x1a/0x20
[<c0236ee7>] acpi_processor_idle+0x11d/0x27f
[<c01010e2>] cpu_idle+0x42/0x60
[<c045c89d>] start_kernel+0x17d/0x1c0
[<c045c3b0>] unknown_bootoption+0x0/0x1f0
handlers:
[<c0294a50>] (ide_intr+0x0/0x170)
Disabling IRQ #14

i have the "irqpoll" option as suggested.

problems:
1) seems that before writing data to disk it waits for:
hda: dma_timer_expiry: dma status == 0x24
this lasts some seconds..

2) compared to 2.6.12 it seems working a bit slower.
on suspend...probably due to the timeout
on resume console is painted, but if i press keys i get nothing on 
console tty.
i have to wait some random seconds...
seems strange because i can switch from consoles...so that's not a real 
freeze.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/