[patch 6/7] s390: ipl device.
From: Heiko Carstens <[email protected]>
Export the ipl device settings to userspace via the sysfs:
* /sys/kernel/ipl_device
Contains a string in on of the following formats:
1) "ccw <bus_id>", or 2) "fcp <bus_id>,<wwpn>,<lun>".
* /sys/kernel/ipl_parameter
is a binary interface that exports the ipl parameter block for
scsi ipl. For non-scsi ipl the ipl_paramter is irrelevant.
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
diffstat:
arch/s390/kernel/head.S | 72 ++++++++++++++++++++++++++++++++++++++++++----
arch/s390/kernel/head64.S | 66 ++++++++++++++++++++++++++++++++++++++++--
arch/s390/kernel/setup.c | 67 ++++++++++++++++++++++++++++++++++++++++++
include/asm-s390/setup.h | 44 ++++++++++++++++++++++++++++
4 files changed, 242 insertions(+), 7 deletions(-)
diff -urpN linux-2.6/arch/s390/kernel/head64.S linux-2.6-patched/arch/s390/kernel/head64.S
--- linux-2.6/arch/s390/kernel/head64.S 2005-09-14 16:47:51.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head64.S 2005-09-14 16:48:18.000000000 +0200
@@ -484,6 +484,8 @@ start:
startup:basr %r13,0 # get base
.LPG1: sll %r13,1 # remove high order bit
srl %r13,1
+ l %r1,.Lget_ipl_device_addr-.LPG1(%r13)
+ basr %r14,%r1
lhi %r1,1 # mode 1 = esame
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
@@ -556,6 +558,9 @@ startup:basr %r13,0
mlgr %r2,%r1 # mem size in bytes in %r3
b .Lfchunk-.LPG1(%r13)
+ .align 4
+.Lget_ipl_device_addr:
+ .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -746,6 +751,63 @@ _pstart:
.global _pend
_pend:
+.Lget_ipl_device:
+ basr %r12,0
+.LPG2: l %r1,0xb8 # get sid
+ sll %r1,15 # test if subchannel is enabled
+ srl %r1,31
+ ltr %r1,%r1
+ bz 0(%r14) # subchannel disabled
+ l %r1,0xb8
+ la %r5,.Lipl_schib-.LPG2(%r12)
+ stsch 0(%r5) # get schib of subchannel
+ bnz 0(%r14) # schib not available
+ tm 5(%r5),0x01 # devno valid?
+ bno 0(%r14)
+ la %r6,ipl_parameter_flags-.LPG2(%r12)
+ oi 3(%r6),0x01 # set flag
+ la %r2,ipl_devno-.LPG2(%r12)
+ mvc 0(2,%r2),6(%r5) # store devno
+ tm 4(%r5),0x80 # qdio capable device?
+ bno 0(%r14)
+ oi 3(%r6),0x02 # set flag
+
+ # copy ipl parameters
+
+ lhi %r0,4096
+ l %r2,20(%r0) # get address of parameter list
+ lhi %r3,IPL_PARMBLOCK_ORIGIN
+ st %r3,20(%r0)
+ lhi %r4,1
+ cr %r2,%r3 # start parameters < destination ?
+ jl 0f
+ lhi %r1,1 # copy direction is upwards
+ j 1f
+0: lhi %r1,-1 # copy direction is downwards
+ ar %r2,%r0
+ ar %r3,%r0
+ ar %r2,%r1
+ ar %r3,%r1
+1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
+ ar %r3,%r1
+ ar %r2,%r1
+ sr %r0,%r4
+ jne 1b
+ b 0(%r14)
+
+ .align 4
+.Lipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_parameter_flags
+ipl_parameter_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
@@ -755,7 +817,7 @@ _pend:
#
.globl _stext
_stext: basr %r13,0 # get base
-.LPG2:
+.LPG3:
#
# Setup stack
#
@@ -774,7 +836,7 @@ _stext: basr %r13,0
lctlg %c0,%c15,0(%r15)
#
- lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
+ lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
brasl %r14,start_kernel # go to C code
#
# We returned from start_kernel ?!? PANIK
diff -urpN linux-2.6/arch/s390/kernel/head.S linux-2.6-patched/arch/s390/kernel/head.S
--- linux-2.6/arch/s390/kernel/head.S 2005-09-14 16:47:51.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/head.S 2005-09-14 16:48:18.000000000 +0200
@@ -485,7 +485,9 @@ start:
#
.org 0x10000
startup:basr %r13,0 # get base
-.LPG1: lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
+.LPG1: l %r1, .Lget_ipl_device_addr-.LPG1(%r13)
+ basr %r14, %r1
+ lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
la %r12,_pstart-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
mvc __LC_IPLDEV(4),IPL_DEVICE-PARMAREA(%r12)
@@ -560,6 +562,9 @@ startup:basr %r13,0
mr %r2,%r1 # mem size in bytes in %r3
b .Lfchunk-.LPG1(%r13)
+ .align 4
+.Lget_ipl_device_addr:
+ .long .Lget_ipl_device
.Lpmask:
.byte 0
.align 8
@@ -755,6 +760,63 @@ _pstart:
.global _pend
_pend:
+.Lget_ipl_device:
+ basr %r12,0
+.LPG2: l %r1,0xb8 # get sid
+ sll %r1,15 # test if subchannel is enabled
+ srl %r1,31
+ ltr %r1,%r1
+ bz 0(%r14) # subchannel disabled
+ l %r1,0xb8
+ la %r5,.Lipl_schib-.LPG2(%r12)
+ stsch 0(%r5) # get schib of subchannel
+ bnz 0(%r14) # schib not available
+ tm 5(%r5),0x01 # devno valid?
+ bno 0(%r14)
+ la %r6,ipl_parameter_flags-.LPG2(%r12)
+ oi 3(%r6),0x01 # set flag
+ la %r2,ipl_devno-.LPG2(%r12)
+ mvc 0(2,%r2),6(%r5) # store devno
+ tm 4(%r5),0x80 # qdio capable device?
+ bno 0(%r14)
+ oi 3(%r6),0x02 # set flag
+
+ # copy ipl parameters
+
+ lhi %r0,4096
+ l %r2,20(%r0) # get address of parameter list
+ lhi %r3,IPL_PARMBLOCK_ORIGIN
+ st %r3,20(%r0)
+ lhi %r4,1
+ cr %r2,%r3 # start parameters < destination ?
+ jl 0f
+ lhi %r1,1 # copy direction is upwards
+ j 1f
+0: lhi %r1,-1 # copy direction is downwards
+ ar %r2,%r0
+ ar %r3,%r0
+ ar %r2,%r1
+ ar %r3,%r1
+1: mvc 0(1,%r3),0(%r2) # finally copy ipl parameters
+ ar %r3,%r1
+ ar %r2,%r1
+ sr %r0,%r4
+ jne 1b
+ b 0(%r14)
+
+ .align 4
+.Lipl_schib:
+ .rept 13
+ .long 0
+ .endr
+
+ .globl ipl_parameter_flags
+ipl_parameter_flags:
+ .long 0
+ .globl ipl_devno
+ipl_devno:
+ .word 0
+
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
@@ -764,11 +826,11 @@ _pend:
#
.globl _stext
_stext: basr %r13,0 # get base
-.LPG2:
+.LPG3:
#
# Setup stack
#
- l %r15,.Linittu-.LPG2(%r13)
+ l %r15,.Linittu-.LPG3(%r13)
mvc __LC_CURRENT(4),__TI_task(%r15)
ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
st %r15,__LC_KERNEL_STACK # set end of kernel stack
@@ -782,8 +844,8 @@ _stext: basr %r13,0
lctl %c0,%c15,0(%r15)
#
- lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
- l %r14,.Lstart-.LPG2(%r13)
+ lam 0,15,.Laregs-.LPG3(%r13) # load access regs needed by uaccess
+ l %r14,.Lstart-.LPG3(%r13)
basr %r14,%r14 # call start_kernel
#
# We returned from start_kernel ?!? PANIK
diff -urpN linux-2.6/arch/s390/kernel/setup.c linux-2.6-patched/arch/s390/kernel/setup.c
--- linux-2.6/arch/s390/kernel/setup.c 2005-09-14 16:48:18.000000000 +0200
+++ linux-2.6-patched/arch/s390/kernel/setup.c 2005-09-14 16:48:18.000000000 +0200
@@ -682,3 +682,70 @@ struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
+#ifdef CONFIG_SYSFS
+
+static ssize_t
+ipl_parameter_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+{
+ unsigned int size;
+
+ if (!IPL_PARMBLOCK_VALID)
+ return 0;
+
+ size = IPL_PARMBLOCK_SIZE;
+
+ if (off > size)
+ return 0;
+ if (off + count > size)
+ count = size - off;
+
+ memcpy(buf, (void *) IPL_PARMBLOCK_START + off, count);
+ return count;
+}
+
+static struct bin_attribute ipl_parameter_attr = {
+ .attr = {
+ .name = "ipl_parameter",
+ .mode = S_IRUGO,
+ .owner = THIS_MODULE,
+ },
+ .size = PAGE_SIZE,
+ .read = &ipl_parameter_read,
+};
+
+static ssize_t
+ipl_device_show(struct subsystem *subsys, char *page)
+{
+ struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+
+ if (!IPL_DEVNO_VALID)
+ goto type_unknown;
+ if (!IPL_PARMBLOCK_VALID)
+ goto type_ccw;
+ if (ipl->hdr.header.version > IPL_MAX_SUPPORTED_VERSION)
+ goto type_unknown;
+ if (ipl->fcp.pbt != IPL_TYPE_FCP)
+ goto type_unknown;
+
+ return sprintf(page, "fcp 0.0.%04x,0x%016llx,0x%016llx\n",
+ ipl->fcp.devno,
+ (unsigned long long) ipl->fcp.wwpn,
+ (unsigned long long) ipl->fcp.lun);
+ type_unknown:
+ return sprintf(page, "unknown\n");
+ type_ccw:
+ return sprintf(page, "ccw 0.0.%04x\n",ipl_devno);
+}
+
+static struct subsys_attribute ipl_device_attr = __ATTR_RO(ipl_device);
+
+static int __init
+ipl_device_sysfs_register(void) {
+ sysfs_create_file(&kernel_subsys.kset.kobj, &ipl_device_attr.attr);
+ sysfs_create_bin_file(&kernel_subsys.kset.kobj, &ipl_parameter_attr);
+ return 0;
+}
+
+__initcall(ipl_device_sysfs_register);
+
+#endif /* CONFIG_SYSFS */
diff -urpN linux-2.6/include/asm-s390/setup.h linux-2.6-patched/include/asm-s390/setup.h
--- linux-2.6/include/asm-s390/setup.h 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6-patched/include/asm-s390/setup.h 2005-09-14 16:48:18.000000000 +0200
@@ -8,11 +8,14 @@
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
+#include <asm/types.h>
+
#define PARMAREA 0x10400
#define COMMAND_LINE_SIZE 896
#define RAMDISK_ORIGIN 0x800000
#define RAMDISK_SIZE 0x800000
#define MEMORY_CHUNKS 16 /* max 0x7fff */
+#define IPL_PARMBLOCK_ORIGIN 0x2000
#ifndef __ASSEMBLY__
@@ -64,6 +67,47 @@ extern unsigned int console_irq;
#define SET_CONSOLE_3215 do { console_mode = 2; } while (0)
#define SET_CONSOLE_3270 do { console_mode = 3; } while (0)
+struct ipl_list_header {
+ u32 length;
+ u8 reserved[3];
+ u8 version;
+} __attribute__((packed));
+
+struct ipl_block_fcp {
+ u32 length;
+ u8 pbt;
+ u8 reserved1[322-1];
+ u16 devno;
+ u8 reserved2[4];
+ u64 wwpn;
+ u64 lun;
+} __attribute__((packed));
+
+struct ipl_parameter_block {
+ union {
+ u32 length;
+ struct ipl_list_header header;
+ } hdr;
+ struct ipl_block_fcp fcp;
+} __attribute__((packed));
+
+#define IPL_MAX_SUPPORTED_VERSION (0)
+
+#define IPL_TYPE_FCP (0)
+
+/*
+ * IPL validity flags and parameters as detected in head.S
+ */
+extern u32 ipl_parameter_flags;
+extern u16 ipl_devno;
+
+#define IPL_DEVNO_VALID (ipl_parameter_flags & 1)
+#define IPL_PARMBLOCK_VALID (ipl_parameter_flags & 2)
+
+#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \
+ IPL_PARMBLOCK_ORIGIN)
+#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.length)
+
#else
#ifndef __s390x__
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |