Hi,
(continuing the unfinished message)
On Sunday, 11 of September 2005 22:08, Daniel Ritz wrote:
> On Sunday 11 September 2005 21.36, Andrew Morton wrote:
> > "Rafael J. Wysocki" <[email protected]> wrote:
> > >
> > > >
> > > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm2/
> > > >
> > > > (kernel.org propagation is slow. There's a temp copy at
> > > > http://www.zip.com.au/~akpm/linux/patches/stuff/2.6.13-mm2.bz2)
> > >
> > > Could you please reintroduce the yenta-free_irq-on-suspend.patch (attached)
> > > into -mm? My box does not resume from disk without it.
> >
> > No probs.
> >
> > Daniel, do you remember why we decided to drop it? What should we do about
> > this? Thanks.
> >
>
> yeah, there was a long discussion about it. see:
> http://marc.theaimsgroup.com/?t=112275164900002&r=1&w=4
> the reason being that it breaks APM suspend on Hugh Dickins' (added to cc:) laptop.
> Linus was quite clear about why reverting...
> http://marc.theaimsgroup.com/?l=linux-kernel&m=112278810115252&w=4
>
> we should look at both problems in detail:
> - with APM it seems to break because the bridge gives interrupt before the
> handler is installed.
> - with ACPI i think some _other_ device gives the interrupts too early. but
> when all devices on the interrupt unregister the irq is disabled and the
> problem is hidden.
>
> i don't think we can do mutch about the APM case...
>
> so Rafael, your /proc/interrupts, lspci -vvv and dmesg, please.
rafael@albercik:~> cat /proc/interrupts
CPU0
0: 2549476 XT-PIC timer
1: 3841 XT-PIC i8042
2: 0 XT-PIC cascade
5: 10 XT-PIC ehci_hcd:usb3
8: 0 XT-PIC rtc
9: 13808 XT-PIC acpi
10: 120111 XT-PIC NVidia nForce3, SysKonnect SK-98xx
11: 74195 XT-PIC ohci_hcd:usb1, ohci_hcd:usb2, yenta, yenta
12: 4733 XT-PIC i8042
14: 90733 XT-PIC ide0
15: 144590 XT-PIC ide1
NMI: 879
LOC: 2549489
ERR: 6
MIS: 0
rafael@albercik:~> /sbin/lspci -vvv
0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80c5
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <available only to root>
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev f6)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80c5
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80c5
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5040 [size=64]
Capabilities: <available only to root>
0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1858
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1858
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1859
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 5
Region 0: Memory at febfdc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1853
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at e800 [size=256]
Region 1: I/O ports at ec00 [size=128]
Region 2: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 185a
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <available only to root>
0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR-
Latency: 0
Bus: primary=00, secondary=02, subordinate=0a, sec-latency=128
I/O behind bridge: 0000b000-0000dfff
Memory behind bridge: f8a00000-feafffff
Prefetchable memory behind bridge: 30000000-33ffffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f6900000-f89fffff
Prefetchable memory behind bridge: c6800000-e67fffff
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: <available only to root>
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV31M [GeForce FX Go5650] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1852
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Expansion ROM at f89e0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit Ethernet Controller (rev 13)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), cache line size 40
Interrupt: pin A routed to IRQ 10
Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at d800 [size=256]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <available only to root>
0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1854
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: fc600000-fd1ff000
I/O window 0: 0000b000-0000bfff
I/O window 1: 0000c000-0000cfff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab)
Subsystem: ASUSTeK Computer Inc.: Unknown device 1854
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin B routed to IRQ 11
Region 0: Memory at fa200000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: 32000000-33fff000 (prefetchable)
Memory window 1: f9600000-fa1ff000
I/O window 0: 0000d000-0000d1ff
I/O window 1: 0000d400-0000d5ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 1857
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin C routed to IRQ 10
Region 0: Memory at feafd000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <available only to root>
0000:02:01.3 System peripheral: Ricoh Co Ltd: Unknown device 0576 (rev 01)
Subsystem: ASUSTeK Computer Inc.: Unknown device 185b
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 11
Region 0: Memory at feafd800 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:01.4 System peripheral: Ricoh Co Ltd: Unknown device 0592
Subsystem: ASUSTeK Computer Inc.: Unknown device 185c
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin D routed to IRQ 11
Region 0: Memory at feafdc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <available only to root>
0000:02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
Subsystem: ASUSTeK Computer Inc.: Unknown device 120f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <available only to root>
Greetings,
Rafael
--
- Would you tell me, please, which way I ought to go from here?
- That depends a good deal on where you want to get to.
-- Lewis Carroll "Alice's Adventures in Wonderland"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |