Re: Very strange Marvell/Yukon Gigabit NIC networking problems

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Daniel Drake wrote:
Hi,

Steve Kieu wrote:

If run 2.6.13 and up the NIC, it is working. Shuttdown
or reboot using /sbin/halt (means power completely off
and on) or /sbin/reboot all other OSs failed to enable
the NIC except 2.6.13.

to restore the normal working of the NIC, boot 2.6.13
and do a hot power reset. (press the reset button)


Stephen recently posted a patch which looks like it might solve this issue.

Steve, maybe you could test it out? I have attached it to this Gentoo bug:

    http://bugs.gentoo.org/100258

Stephen, thanks for your hard work!

I will try this one on a problematic ASUS board than now runs on 2.11.11 with sk98lin-8.18.2.2.patch

Applied the patch from #100258 to 2.6.13.1 successfully (some lines offset) and recompiled. Will try it tomorrow when I am at the machine.

BTW, is this patch submitted to the Linus or -mm tree already?

Kalin.

--
|[ ~~~~~~~~~~~~~~~~~~~~~~ ]|
+-> http://ThinRope.net/ <-+
|[ ______________________ ]|

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux