Re: 2.6.13-mm2

["J.A. Magallon" <jamagallon@able.es>]

On 09.11, Patrick McHardy wrote:
> Andrew Morton wrote:
> > "J.A. Magallon" <jamagallon@able.es> wrote:
> > 
> >>I can not ifup an interface while iptables is using it.
> >>Is this expected behaviour ?
> > 
> > Maybe it's expected, but breaking existing userspace is a serious issue.
> 
> No, its not expected.
> 
> >>There is a possible bug (IMHO) in Mandrake initscripts, that start iptables
> >>before network interfaces, but this had always worked.
> >>
> >>Any ideas ?
> 
> What's happening when you try to set the interface up? Please
> provide output of ifup and strace of the failing command. Thanks.

werewolf:~# ifdown eth0
werewolf:~# service iptables start
Applying iptables firewall rules: 
                                                                [  OK  ]
werewolf:~# iptables -v -t nat -L
Chain PREROUTING (policy ACCEPT 2 packets, 156 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 5 packets, 300 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 MASQUERADE  all  --  any    eth0    anywhere             anywhere            

Chain OUTPUT (policy ACCEPT 5 packets, 300 bytes)
 pkts bytes target     prot opt in     out     source               destination         
werewolf:~# iptables -v -t filter -L
Chain INPUT (policy ACCEPT 257 packets, 51631 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy DROP 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ACCEPT     all  --  eth0   eth1    anywhere             anywhere            state RELATED,ESTABLISHED 
    0     0 ACCEPT     all  --  eth1   eth0    anywhere             anywhere            

Chain OUTPUT (policy ACCEPT 251 packets, 51163 bytes)
 pkts bytes target     prot opt in     out     source               destination         

werewolf:~# ifup eth0

Determining IP information for eth0...Operation failed.
 failed.

I traced the problem to pump, and I did a diff between strace of pump
when it works and when it doesnt (witout and with iptables started):

 socket(PF_FILE, SOCK_STREAM, 0)         = 3
 connect(3, {sa_family=AF_FILE, path="/var/run/pump.sock"}, 20) = 0
 write(3, "\0\0\0\0eth0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300"..., 4280) = 4280
-read(3, "\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4280) = 4280
-exit_group(0)                           = ?
-Process 7931 detached
+read(3, "\1\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4280) = 4280
+socket(PF_FILE, SOCK_STREAM, 0)         = 4
+connect(4, {sa_family=AF_FILE, path="/var/run/pump.sock"}, 20) = 0
+write(4, "\0\0\0\0eth0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\300"..., 4280) = 4280
+read(4, "\1\0\0\0\1\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4280) = 4280
+write(2, "Operation failed.\n", 18Operation failed.
+)     = 18
+exit_group(1)                           = ?
+Process 7822 detached

pump seems to write something in the socket, try to read it again and gets
different results.

Note, my iptables are modular and I did not unload the modules, just stopped
them with 'service iptables stop'. Digging further, if I just do
iptables -t nat -F, pump works again.

Hope this helps.

--
J.A. Magallon <jamagallon()able!es>     \               Software is like sex:
werewolf!able!es                         \         It's better when it's free
Mandriva Linux release 2006.0 (Cooker) for i586
Linux 2.6.13-jam3 (gcc 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0))


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/