[PATCH 2.6.13 10/20] aic94xx: aic94xx_reg.c Register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Luben Tuikov <[email protected]>

diff -X linux-2.6.13/Documentation/dontdiff -Naur linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_reg.c linux-2.6.13/drivers/scsi/aic94xx/aic94xx_reg.c
--- linux-2.6.13-orig/drivers/scsi/aic94xx/aic94xx_reg.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.13/drivers/scsi/aic94xx/aic94xx_reg.c	2005-09-09 11:21:23.000000000 -0400
@@ -0,0 +1,333 @@
+/*
+ * Aic94xx SAS/SATA driver register access.
+ *
+ * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <[email protected]>
+ *
+ * This file is licensed under GPLv2.
+ * 
+ * This file is part of the aic94xx driver.
+ *
+ * The aic94xx driver is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * The aic94xx driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the aic94xx driver; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * $Id: //depot/aic94xx/aic94xx_reg.c#13 $
+ */
+
+#include <linux/pci.h>
+#include "aic94xx_reg.h"
+#include "aic94xx.h"
+
+/* Writing to device address space.
+ * Offset comes before value to remind that the operation of
+ * this function is *offs = val.
+ */
+static inline void asd_write_byte(struct asd_ha_struct *asd_ha,
+				  unsigned long offs, u8 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outb(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writeb(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+static inline void asd_write_word(struct asd_ha_struct *asd_ha,
+				  unsigned long offs, u16 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outw(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writew(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+static inline void asd_write_dword(struct asd_ha_struct *asd_ha,
+				   unsigned long offs, u32 val)
+{
+	if (unlikely(asd_ha->iospace))
+		outl(val,
+		     (unsigned long)asd_ha->io_handle[0].addr + (offs & 0xFF));
+	else
+		writel(val, asd_ha->io_handle[0].addr + offs);
+	wmb();
+}
+
+/* Reading from device address space.
+ */
+static inline u8 asd_read_byte(struct asd_ha_struct *asd_ha,
+			       unsigned long offs)
+{
+	u8 val;
+	if (unlikely(asd_ha->iospace))
+		val = inb((unsigned long) asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readb(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u16 asd_read_word(struct asd_ha_struct *asd_ha,
+				unsigned long offs)
+{
+	u16 val;
+	if (unlikely(asd_ha->iospace))
+		val = inw((unsigned long)asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readw(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u32 asd_read_dword(struct asd_ha_struct *asd_ha,
+				 unsigned long offs)
+{
+	u32 val;
+	if (unlikely(asd_ha->iospace))
+		val = inl((unsigned long) asd_ha->io_handle[0].addr
+			  + (offs & 0xFF));
+	else
+		val = readl(asd_ha->io_handle[0].addr + offs);
+	rmb();
+	return val;
+}
+
+static inline u32 asd_mem_offs_swa(void)
+{
+	return 0;
+}
+
+static inline u32 asd_mem_offs_swc(void)
+{
+	return asd_mem_offs_swa() + MBAR0_SWA_SIZE;
+}
+
+static inline u32 asd_mem_offs_swb(void)
+{
+	return asd_mem_offs_swc() + MBAR0_SWC_SIZE + 0x20;
+}
+
+/* We know that the register wanted is in the range
+ * of the sliding window.
+ */
+#define ASD_READ_SW(ww, type, ord)                                     \
+static inline type asd_read_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+					  u32 reg)                     \
+{                                                                      \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];    \
+	u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+	return asd_read_##ord (asd_ha, (unsigned long) map_offs);      \
+}
+
+#define ASD_WRITE_SW(ww, type, ord)                                    \
+static inline void asd_write_##ww##_##ord (struct asd_ha_struct *asd_ha,\
+				  u32 reg, type val)                   \
+{                                                                      \
+	struct asd_ha_addrspace *io_handle = &asd_ha->io_handle[0];    \
+	u32 map_offs=(reg - io_handle-> ww##_base )+asd_mem_offs_##ww ();\
+	asd_write_##ord (asd_ha, (unsigned long) map_offs, val);       \
+}
+
+ASD_READ_SW(swa, u8,  byte);
+ASD_READ_SW(swa, u16, word);
+ASD_READ_SW(swa, u32, dword);
+
+ASD_READ_SW(swb, u8,  byte);
+ASD_READ_SW(swb, u16, word);
+ASD_READ_SW(swb, u32, dword);
+
+ASD_READ_SW(swc, u8,  byte);
+ASD_READ_SW(swc, u16, word);
+ASD_READ_SW(swc, u32, dword);
+
+ASD_WRITE_SW(swa, u8,  byte);
+ASD_WRITE_SW(swa, u16, word);
+ASD_WRITE_SW(swa, u32, dword);
+
+ASD_WRITE_SW(swb, u8,  byte);
+ASD_WRITE_SW(swb, u16, word);
+ASD_WRITE_SW(swb, u32, dword);
+
+ASD_WRITE_SW(swc, u8,  byte);
+ASD_WRITE_SW(swc, u16, word);
+ASD_WRITE_SW(swc, u32, dword);
+
+/*
+ * A word about sliding windows:
+ * MBAR0 is divided into sliding windows A, C and B, in that order.
+ * SWA starts at offset 0 of MBAR0, up to 0x57, with size 0x58 bytes.
+ * SWC starts at offset 0x58 of MBAR0, up to 0x60, with size 0x8 bytes.
+ * From 0x60 to 0x7F, we have a copy of PCI config space 0x60-0x7F.
+ * SWB starts at offset 0x80 of MBAR0 and extends to the end of MBAR0.
+ * See asd_init_sw() in aic94xx_hwi.c
+ *
+ * We map the most common registers we'd access of the internal 4GB
+ * host adapter memory space.  If a register/internal memory location
+ * is wanted which is not mapped, we slide SWB, by paging it,
+ * see asd_move_swb() in aic94xx_reg.c.
+ */
+
+/**
+ * asd_move_swb -- move sliding window B
+ * @asd_ha: pointer to host adapter structure
+ * @reg: register desired to be within range of the new window
+ */
+static inline void asd_move_swb(struct asd_ha_struct *asd_ha, u32 reg)
+{
+	u32 base = reg & ~(MBAR0_SWB_SIZE-1);
+	pci_write_config_dword(asd_ha->pcidev, PCI_CONF_MBAR0_SWB, base);
+	asd_ha->io_handle[0].swb_base = base;
+}
+
+static void __asd_write_reg_byte(struct asd_ha_struct *asd_ha, u32 reg, u8 val)
+{
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+	if (io_handle->swa_base <= reg
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+		asd_write_swa_byte (asd_ha, reg,val);
+	else if (io_handle->swb_base <= reg
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+		asd_write_swb_byte (asd_ha, reg, val);
+	else if (io_handle->swc_base <= reg
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+		asd_write_swc_byte (asd_ha, reg, val);
+	else {
+		/* Ok, we have to move SWB */
+		asd_move_swb(asd_ha, reg);
+		asd_write_swb_byte (asd_ha, reg, val);
+	}
+}
+
+#define ASD_WRITE_REG(type, ord)                                  \
+void asd_write_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg, type val)\
+{                                                                 \
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+	unsigned long flags;                                      \
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);         \
+	spin_lock_irqsave(&asd_ha->iolock, flags);                \
+	if (io_handle->swa_base <= reg                            \
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)        \
+		asd_write_swa_##ord (asd_ha, reg,val);            \
+	else if (io_handle->swb_base <= reg                       \
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)   \
+		asd_write_swb_##ord (asd_ha, reg, val);           \
+	else if (io_handle->swc_base <= reg                       \
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)   \
+		asd_write_swc_##ord (asd_ha, reg, val);           \
+	else {                                                    \
+		/* Ok, we have to move SWB */                     \
+		asd_move_swb(asd_ha, reg);                        \
+		asd_write_swb_##ord (asd_ha, reg, val);           \
+	}                                                         \
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);           \
+}
+
+ASD_WRITE_REG(u8, byte);
+ASD_WRITE_REG(u16,word);
+ASD_WRITE_REG(u32,dword);
+
+static u8 __asd_read_reg_byte(struct asd_ha_struct *asd_ha, u32 reg)
+{
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0];
+	u8 val;
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);
+	if (io_handle->swa_base <= reg
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)
+		val = asd_read_swa_byte (asd_ha, reg);
+	else if (io_handle->swb_base <= reg
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)
+		val = asd_read_swb_byte (asd_ha, reg);
+	else if (io_handle->swc_base <= reg
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)
+		val = asd_read_swc_byte (asd_ha, reg);
+	else {
+		/* Ok, we have to move SWB */
+		asd_move_swb(asd_ha, reg);
+		val = asd_read_swb_byte (asd_ha, reg);
+	}
+	return val;
+}
+
+#define ASD_READ_REG(type, ord)                                   \
+type asd_read_reg_##ord (struct asd_ha_struct *asd_ha, u32 reg)   \
+{                                                                 \
+	struct asd_ha_addrspace *io_handle=&asd_ha->io_handle[0]; \
+	type val;                                                 \
+	unsigned long flags;                                      \
+	BUG_ON(reg >= 0xC0000000 || reg < ALL_BASE_ADDR);         \
+	spin_lock_irqsave(&asd_ha->iolock, flags);                \
+	if (io_handle->swa_base <= reg                            \
+	    && reg < io_handle->swa_base + MBAR0_SWA_SIZE)        \
+		val = asd_read_swa_##ord (asd_ha, reg);           \
+	else if (io_handle->swb_base <= reg                       \
+		 && reg < io_handle->swb_base + MBAR0_SWB_SIZE)   \
+		val = asd_read_swb_##ord (asd_ha, reg);           \
+	else if (io_handle->swc_base <= reg                       \
+		 && reg < io_handle->swc_base + MBAR0_SWC_SIZE)   \
+		val = asd_read_swc_##ord (asd_ha, reg);           \
+	else {                                                    \
+		/* Ok, we have to move SWB */                     \
+		asd_move_swb(asd_ha, reg);                        \
+		val = asd_read_swb_##ord (asd_ha, reg);           \
+	}                                                         \
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);           \
+	return val;                                               \
+}
+
+ASD_READ_REG(u8, byte);
+ASD_READ_REG(u16,word);
+ASD_READ_REG(u32,dword);
+
+/**
+ * asd_read_reg_string -- read a string of bytes from io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @dst: pointer to a destination buffer where data will be written to
+ * @offs: start offset (register) to read from
+ * @count: number of bytes to read
+ */
+void asd_read_reg_string(struct asd_ha_struct *asd_ha, void *dst,
+			 u32 offs, int count)
+{
+	u8 *p = dst;
+	unsigned long flags;
+	
+	spin_lock_irqsave(&asd_ha->iolock, flags);
+	for ( ; count > 0; count--, offs++, p++)
+		*p = __asd_read_reg_byte(asd_ha, offs);
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}
+
+/**
+ * asd_write_reg_string -- write a string of bytes to io space memory
+ * @asd_ha: pointer to host adapter structure
+ * @src: pointer to source buffer where data will be read from
+ * @offs: start offset (register) to write to
+ * @count: number of bytes to write
+ */
+void asd_write_reg_string(struct asd_ha_struct *asd_ha, void *src,
+			  u32 offs, int count)
+{
+	u8 *p = src;
+	unsigned long flags;
+	
+	spin_lock_irqsave(&asd_ha->iolock, flags);
+	for ( ; count > 0; count--, offs++, p++)
+		__asd_write_reg_byte(asd_ha, offs, *p);
+	spin_unlock_irqrestore(&asd_ha->iolock, flags);
+}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux