Stefan Smietanowski wrote:
> Mathias Adam wrote:
> > Currently serial8250_set_termios() refuses to program a baud rate larger
> > than uartclk/16. However the 16C950 supports baud rates up to uartclk/4.
> > This worked already with Linux 2.4 so the biggest part of this patch was
> > simply taken from there and adapted to 2.6.
> > - unsigned int baud, quot;
> > + unsigned int baud, quot, max_baud;
> ^^^^^^^^
> > - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
> > + MAX_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16);
> ^^^^^^^^
>
> Did you even compile test this?
Oops, I really really wonder how THIS could have happened as I just attached
my existing patch file (which was and still is correct) without touching
it - at least that's what I thought... Sorry!
Mathias Adam
I hope everything's alright this time:
--- linux-2.6.13-org/drivers/serial/8250.c 2005-08-29 01:41:01.000000000 +0200
+++ linux-2.6.13/drivers/serial/8250.c 2005-09-09 02:16:49.000000000 +0200
@@ -1665,7 +1665,7 @@
struct uart_8250_port *up = (struct uart_8250_port *)port;
unsigned char cval, fcr = 0;
unsigned long flags;
- unsigned int baud, quot;
+ unsigned int baud, quot, max_baud;
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -1697,9 +1697,28 @@
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ max_baud = (up->port.type == PORT_16C950 ? port->uartclk/4 : port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
quot = serial8250_get_divisor(port, baud);
+ /*
+ * 16C950 supports additional prescaler ratios between 1:16 and 1:4
+ * thus increasing max baud rate to uartclk/4. The following was taken
+ * from kernel 2.4 by Mathias Adam <[email protected]> to make the Socket
+ * Bluetooth CF Card work under 2.6.13.
+ */
+ if (up->port.type == PORT_16C950) {
+ unsigned int baud_base = port->uartclk/16;
+ if (baud <= port->uartclk/16)
+ serial_icr_write(up, UART_TCR, 0);
+ else if (baud <= port->uartclk/8) {
+ serial_icr_write(up, UART_TCR, 0x8);
+ } else if (baud <= port->uartclk/4) {
+ serial_icr_write(up, UART_TCR, 0x4);
+ } else
+ serial_icr_write(up, UART_TCR, 0);
+ }
+
/*
* Oxford Semi 952 rev B workaround
*/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |