Re: Regarding the booting the linux kernel on a > PPC board.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Vinay!

You might want to turn on kernel debugging and also the
early printk support.

You also might want to come over to the linuxppc-embedded
and linuxppc-dev mailinglists at ozlabs.org where those question
are pretty well known. Tell us more about your board/system,
check the archives!

Greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

vinay hegde wrote:
Hi All,

I am working on bringing up a PowerPC based board
with Linux 2.6 kernel (Board supoort package).
However, I am facing some problem with respect to
debugging.

When I boot the board with the Linux kernel (BSP),
the board hangs after printing the following
information.


Network Loading from: /dev/enet0 Client IP Address = 192.168.4.38 Server IP Address = 192.168.4.101 Gateway IP Address = 192.168.4.253 Subnet IP Address Mask = 255.255.255.0 Boot File Name = developer.kdi Load Address = 04000000 Buffer Size = 2000000
Network Boot File Load Start - Press <ESC> to
Bypass, <SPC> to Continue

Bytes Received =&6141952, Bytes Loaded =&6141952 Bytes/Second =&511829, Elapsed Time =12 Second(s) Boot Device =/dev/enet0 Boot File =developer.kdi Load Address =04000000 Load Size =005DB800 Execution Address =04000020 Execution Offset =00000020 Passing control to the loaded file/image. loaded at: 00800000 00DD8800 zimage at: 008058E0 009933BB initrd at: 00998000 00DD8800 avail ram: 00400000 00800000
Linux/PPC load: console=ttyS0,9600 console=tty0
root=/dev/sda2 console=ttyS0,9600 root=/dev/ram rw Uncompressing Linux...done. Now booting the kernel


.

I am going through the source code to figure out the
problem, but unable to find out what is going wrong
here.

Does anybody have any idea about the problem? Also,
is it possible to print some debug messages at this
point of booting? {Note that, in the early stage of
booting process the serial is initialized and all
the above mentioned messages (like Uncomressing
Linux, Now booting the kernel etc) are printed. And
immediately after printing the "now booting the
kernel message,the serial is closed. This code is in
uncompress_kernel() function in
arch/ppc/boot/simple/misc.c file).

Can somebody help me with the above problem?

Thank you,

vinay hegde.





	

	
		
__________________________________________________________ Yahoo! India Matrimony: Find your partner online. Go to http://yahoo.shaadi.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux