Did not move the parport interface properly into IEEE1284_PH_REV_IDLE
phase at end of data due to comparing bytes with nibbles. Internal
phase IEEE1284_PH_HBUSY_DNA became unused, so remove it.
Signed-off-by: Marko Kohtala <[email protected]>
---
drivers/media/video/cpia_pp.c | 30 ++++++++-----------
drivers/parport/ieee1284_ops.c | 62 +++++++++++++++++++----------------------
include/linux/parport.h | 1
3 files changed, 42 insertions(+), 51 deletions(-)
Index: linux-dvb/drivers/media/video/cpia_pp.c
===================================================================
--- linux-dvb.orig/drivers/media/video/cpia_pp.c 2005-05-30 19:44:27.000000000 +0300
+++ linux-dvb/drivers/media/video/cpia_pp.c 2005-05-30 19:48:30.000000000 +0300
@@ -170,16 +170,9 @@ static size_t cpia_read_nibble (struct p
/* Does the error line indicate end of data? */
if (((i /*& 1*/) == 0) &&
(parport_read_status(port) & PARPORT_STATUS_ERROR)) {
- port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
- DBG("%s: No more nibble data (%d bytes)\n",
- port->name, i/2);
-
- /* Go to reverse idle phase. */
- parport_frob_control (port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
- port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- break;
+ DBG("%s: No more nibble data (%d bytes)\n",
+ port->name, i/2);
+ goto end_of_data;
}
/* Event 7: Set nAutoFd low. */
@@ -227,18 +220,21 @@ static size_t cpia_read_nibble (struct p
byte = nibble;
}
- i /= 2; /* i is now in bytes */
-
if (i == len) {
/* Read the last nibble without checking data avail. */
- port = port->physport;
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ end_of_data:
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ }
else
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
}
- return i;
+ return i/2;
}
/* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
Index: linux-dvb/drivers/parport/ieee1284_ops.c
===================================================================
--- linux-dvb.orig/drivers/parport/ieee1284_ops.c 2005-05-30 19:45:54.000000000 +0300
+++ linux-dvb/drivers/parport/ieee1284_ops.c 2005-05-30 19:48:30.000000000 +0300
@@ -166,17 +166,7 @@ size_t parport_ieee1284_read_nibble (str
/* Does the error line indicate end of data? */
if (((i & 1) == 0) &&
(parport_read_status(port) & PARPORT_STATUS_ERROR)) {
- port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
- DPRINTK (KERN_DEBUG
- "%s: No more nibble data (%d bytes)\n",
- port->name, i/2);
-
- /* Go to reverse idle phase. */
- parport_frob_control (port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
- port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- break;
+ goto end_of_data;
}
/* Event 7: Set nAutoFd low. */
@@ -226,18 +216,25 @@ size_t parport_ieee1284_read_nibble (str
byte = nibble;
}
- i /= 2; /* i is now in bytes */
-
if (i == len) {
/* Read the last nibble without checking data avail. */
- port = port->physport;
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ end_of_data:
+ DPRINTK (KERN_DEBUG
+ "%s: No more nibble data (%d bytes)\n",
+ port->name, i/2);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ }
else
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
}
- return i;
+ return i/2;
#endif /* IEEE1284 support */
}
@@ -257,17 +254,7 @@ size_t parport_ieee1284_read_byte (struc
/* Data available? */
if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
- port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
- DPRINTK (KERN_DEBUG
- "%s: No more byte data (%Zd bytes)\n",
- port->name, count);
-
- /* Go to reverse idle phase. */
- parport_frob_control (port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
- port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- break;
+ goto end_of_data;
}
/* Event 14: Place data bus in high impedance state. */
@@ -319,11 +306,20 @@ size_t parport_ieee1284_read_byte (struc
if (count == len) {
/* Read the last byte without checking data avail. */
- port = port->physport;
- if (parport_read_status (port) & PARPORT_STATUS_ERROR)
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA;
+ if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
+ end_of_data:
+ DPRINTK (KERN_DEBUG
+ "%s: No more byte data (%Zd bytes)\n",
+ port->name, count);
+
+ /* Go to reverse idle phase. */
+ parport_frob_control (port,
+ PARPORT_CONTROL_AUTOFD,
+ PARPORT_CONTROL_AUTOFD);
+ port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
+ }
else
- port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
+ port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
}
return count;
Index: linux-dvb/include/linux/parport.h
===================================================================
--- linux-dvb.orig/include/linux/parport.h 2005-05-30 19:44:27.000000000 +0300
+++ linux-dvb/include/linux/parport.h 2005-05-30 19:48:30.000000000 +0300
@@ -242,7 +242,6 @@ enum ieee1284_phase {
IEEE1284_PH_FWD_IDLE,
IEEE1284_PH_TERMINATE,
IEEE1284_PH_NEGOTIATION,
- IEEE1284_PH_HBUSY_DNA,
IEEE1284_PH_REV_IDLE,
IEEE1284_PH_HBUSY_DAVAIL,
IEEE1284_PH_REV_DATA,
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|