Re: 2.6.13-mm1

[Andrew Morton <akpm@osdl.org>]

Reuben Farrelly <reuben-lkml@reub.net> wrote:
>
> Hi,
> 
> On 1/09/2005 10:58 a.m., Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm1/
> > 
> ...
>
> This patch:
> 
> netlink-log-protocol-failures.patch
> 
> is causing lots of messages like this to be logged on my console:
> 
> Sep  2 11:52:41 tornado kernel: DEBUG: Failed to load PF_NETLINK protocol 9
>
> It seems to be caused by audit support not being enabled in as if I rebuild 
> with audit support the message goes away :)

OK, thanks.  I passed that on to David and Patrick.

> 
> 
> I'm also observing some USB messages logged:
> 
> Sep  2 13:26:22 tornado kernel: usb 5-1: new full speed USB device using 
> uhci_hcd and address 13
> Sep  2 13:26:22 tornado kernel: drivers/usb/class/usblp.c: usblp0: USB 
> Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
> Sep  2 13:26:23 tornado kernel: hub 5-0:1.0: port 1 disabled by hub (EMI?), 
> re-enabling...
> Sep  2 13:26:23 tornado kernel: usb 5-1: USB disconnect, address 13
> Sep  2 13:26:23 tornado kernel: drivers/usb/class/usblp.c: usblp0: removed
> Sep  2 13:26:23 tornado kernel: usb 5-1: new full speed USB device using 
> uhci_hcd and address 14
> Sep  2 13:26:23 tornado kernel: usb 5-1: device descriptor read/64, error -71
> Sep  2 13:26:23 tornado kernel: usb 5-1: device descriptor read/64, error -71
> Sep  2 13:26:23 tornado kernel: usb 5-1: new full speed USB device using 
> uhci_hcd and address 15
> Sep  2 13:26:23 tornado kernel: usb 5-1: device descriptor read/all, error -71
> Sep  2 13:26:23 tornado kernel: usb 5-1: new full speed USB device using 
> uhci_hcd and address 16
> Sep  2 13:26:23 tornado kernel: usb 5-1: can't set config #1, error -71
> Sep  2 13:26:23 tornado kernel: usb 5-1: new full speed USB device using 
> uhci_hcd and address 17
> Sep  2 13:26:24 tornado kernel: usb 5-1: unable to read config index 0 
> descriptor/start
> Sep  2 13:26:24 tornado kernel: usb 5-1: can't read configurations, error -71
> 
> [root@tornado kernel]# lsusb
> Bus 005 Device 004: ID 050d:0105 Belkin Components
> Bus 005 Device 003: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
> Bus 005 Device 001: ID 0000:0000
> Bus 004 Device 001: ID 0000:0000
> Bus 003 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 001: ID 0000:0000
> [root@tornado kernel]#
> 
> Output of lsusb -v up at http://www.reub.net/kernel/lsusb-output
> 

Added the usual Cc's...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/