Serial driver (serial_core.c) status messages should be set to KERN_INFO

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,


When upgrading to 2.6.13 I've noticed that serial driver reports it status with unknown severity, causing the boot-splash to be overridden.


Please consider this modification.


Best Regards,

Alon Bar-Lev.


At drivers/serial/serial_core.c


static inline void

uart_report_port(struct uart_driver *drv, struct uart_port *port)
{
-        printk("%s%d", drv->dev_name, port->line);
+      printk(KERN_INFO + "%s%d", drv->dev_name, port->line);

        printk(" at ");
        switch (port->iotype) {
        case UPIO_PORT:
                printk("I/O 0x%x", port->iobase);
                break;
        case UPIO_HUB6:
                printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6);
                break;
        case UPIO_MEM:
        case UPIO_MEM32:
                printk("MMIO 0x%lx", port->mapbase);
                break;
        }
        printk(" (irq = %d) is a %s\n", port->irq, uart_type(port));
}

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux