On Wed, Aug 31, 2005 at 05:13:10AM -0700, [email protected] wrote:
Hi Natalie,
sorry for the late catchup...
Just to make sure we use the cpu maps properly here is the current definition
iam not sure if you are breaking any of these assumptions, cause if you do
you will break existing implementations... so pardon for the verbosity.
cpu_possible_map - must include all possible cpus that can ever exist in this
instance of boot. This map is static, i.e you can grow
or remove bits without causing confution to the rest of the
subsystem. We attempted to change, but there was not much
in return for the savings, for the complexity we would
add to make this map dynamic.
cpu_present_map - indicates that these are present and operational. OS
can decide if they should be brought up or not.
when CONFIG_HOTPLUG_CPU is *not* defined, then cpu_possible_map and
cpu_present_map are the same. When CONFIG_HOTPLUG_CPU=y, then we extend
cpu_possible_map to cover the range of NR_CPUS, but cpu_present_map still shows
what is real.
When a physical hotplug happens, cpu_present_map is updated by who ever manages
the physical hotplug.
>
> Current IA32 CPU hotplug code doesn't allow bringing up processors that were not present in the boot configuration.
> To make existing hot plug facility more practical for physical hot plug, possible processors should be encountered
> during boot for potentual hot add/replace/remove. On ES7000, ACPI marks all the sockets that are empty or not assigned
> to the partitionas as "disabled". The patch allows arrays/masks with APIC info for disabled processors to be
This sounds like a cluge to me. The correct implementation would be you would
need some sysmgmt deamon or something that works with the kernel to notify of
new cpus and populate apicid and grow cpu_present_map. Making an assumption that
disabled APICID are valid for ES7000 sake is not a safe assumption.
> initialized. Then the OS can bring up a processor that was inserted in the socked and brought into configuration
> during runtime.
> To test the code, one can boot the system with maxcpu=1 and then bring the rest of the processors up, which was not
> possible so far (only maxcpus number of nodes were created).
> The patch also makes proc entry for interrupts dynamically change to only show current onlined processors.
>
> Signed-off-by: Natalie Protasevich <[email protected]>
> ---
>
> arch/i386/kernel/acpi/boot.c | 2 ++
> arch/i386/kernel/irq.c | 8 ++++----
> arch/i386/kernel/mpparse.c | 4 ++++
> arch/i386/kernel/smpboot.c | 3 ++-
> arch/i386/mach-default/topology.c | 4 ++--
> kernel/cpu.c | 4 ++++
> 6 files changed, 18 insertions(+), 7 deletions(-)
>
> diff -puN arch/i386/kernel/acpi/boot.c~hotcpu-i386 arch/i386/kernel/acpi/boot.c
> --- linux-2.6.13-rc6-mm2/arch/i386/kernel/acpi/boot.c~hotcpu-i386 2005-08-31 04:17:20.832038600 -0700
> +++ linux-2.6.13-rc6-mm2-root/arch/i386/kernel/acpi/boot.c 2005-08-31 04:19:35.259602504 -0700
> @@ -255,9 +255,11 @@ acpi_parse_lapic(acpi_table_entry_header
>
> acpi_table_print_madt_entry(header);
>
> +#ifndef CONFIG_HOTPLUG_CPU
> /* no utility in registering a disabled processor */
> if (processor->flags.enabled == 0)
> return 0;
> +#endif
On same lines, the above config code seems not appropriate. When your platform
needs to hot-add a cpu, find a way to set these flags, you cant break
current behaviour as for a platform quirk!
>
> x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
>
> diff -puN arch/i386/kernel/mpparse.c~hotcpu-i386 arch/i386/kernel/mpparse.c
> --- linux-2.6.13-rc6-mm2/arch/i386/kernel/mpparse.c~hotcpu-i386 2005-08-31 04:17:20.877031760 -0700
> +++ linux-2.6.13-rc6-mm2-root/arch/i386/kernel/mpparse.c 2005-08-31 04:20:49.297347056 -0700
> @@ -125,8 +125,10 @@ static void __init MP_processor_info (st
> int ver, apicid, cpu, found_bsp = 0;
> physid_mask_t tmp;
>
> +#ifndef CONFIG_HOTPLUG_CPU
> if (!(m->mpc_cpuflag & CPU_ENABLED))
> return;
> +#endif
Same here... platform quirk!
>
> apicid = mpc_apic_id(m, translation_table[mpc_record]);
>
> @@ -190,11 +192,13 @@ static void __init MP_processor_info (st
> return;
> }
>
> +#ifndef CONFIG_HOTPLUG_CPU
> if (num_processors >= maxcpus) {
> printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
> " Processor ignored.\n", maxcpus);
> return;
> }
> +#endif
> num_processors++;
> ver = m->mpc_apicver;
>
> diff -puN arch/i386/kernel/smpboot.c~hotcpu-i386 arch/i386/kernel/smpboot.c
> --- linux-2.6.13-rc6-mm2/arch/i386/kernel/smpboot.c~hotcpu-i386 2005-08-31 04:17:20.924024616 -0700
> +++ linux-2.6.13-rc6-mm2-root/arch/i386/kernel/smpboot.c 2005-08-31 04:21:49.474198784 -0700
> @@ -1003,9 +1003,10 @@ int __devinit smp_prepare_cpu(int cpu)
> struct warm_boot_cpu_info info;
> struct work_struct task;
> int apicid, ret;
> + extern u8 bios_cpu_apicid[NR_CPUS];
>
> lock_cpu_hotplug();
> - apicid = x86_cpu_to_apicid[cpu];
> + apicid = bios_cpu_apicid[cpu];
> if (apicid == BAD_APICID) {
> ret = -ENODEV;
> goto exit;
> diff -puN arch/i386/mach-default/topology.c~hotcpu-i386 arch/i386/mach-default/topology.c
> --- linux-2.6.13-rc6-mm2/arch/i386/mach-default/topology.c~hotcpu-i386 2005-08-31 04:17:20.957019600 -0700
> +++ linux-2.6.13-rc6-mm2-root/arch/i386/mach-default/topology.c 2005-08-31 04:22:13.020619184 -0700
> @@ -76,7 +76,7 @@ static int __init topology_init(void)
> for_each_online_node(i)
> arch_register_node(i);
>
> - for_each_present_cpu(i)
> + for_each_cpu(i)
Nope. Should still be for present_cpus. with NR_CPUS large we would see
way too many files in sysfs than what is really available.
> arch_register_cpu(i);
> return 0;
> }
> @@ -87,7 +87,7 @@ static int __init topology_init(void)
> {
> int i;
>
> - for_each_present_cpu(i)
> + for_each_cpu(i)
> arch_register_cpu(i);
> return 0;
> }
> diff -puN kernel/cpu.c~hotcpu-i386 kernel/cpu.c
> --- linux-2.6.13-rc6-mm2/kernel/cpu.c~hotcpu-i386 2005-08-31 04:17:21.002012760 -0700
> +++ linux-2.6.13-rc6-mm2-root/kernel/cpu.c 2005-08-31 04:23:34.378250944 -0700
> @@ -158,7 +158,11 @@ int __devinit cpu_up(unsigned int cpu)
> if ((ret = down_interruptible(&cpucontrol)) != 0)
> return ret;
>
> +#ifdef CONFIG_HOTPLUG_CPU
> + if (cpu_online(cpu)) {
> +#else
> if (cpu_online(cpu) || !cpu_present(cpu)) {
> +#endif
ditto.....
> ret = -EINVAL;
> goto out;
> }
> diff -puN arch/i386/kernel/irq.c~hotcpu-i386 arch/i386/kernel/irq.c
> --- linux-2.6.13-rc6-mm2/arch/i386/kernel/irq.c~hotcpu-i386 2005-08-31 04:17:21.047005920 -0700
> +++ linux-2.6.13-rc6-mm2-root/arch/i386/kernel/irq.c 2005-08-31 04:25:21.761926144 -0700
> @@ -248,7 +248,7 @@ int show_interrupts(struct seq_file *p,
>
> if (i == 0) {
> seq_printf(p, " ");
> - for_each_cpu(j)
> + for_each_online_cpu(j)
> seq_printf(p, "CPU%d ",j);
> seq_putc(p, '\n');
> }
> @@ -262,7 +262,7 @@ int show_interrupts(struct seq_file *p,
> #ifndef CONFIG_SMP
> seq_printf(p, "%10u ", kstat_irqs(i));
> #else
> - for_each_cpu(j)
> + for_each_online_cpu(j)
> seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
> #endif
> seq_printf(p, " %14s", irq_desc[i].handler->typename);
> @@ -276,12 +276,12 @@ skip:
> spin_unlock_irqrestore(&irq_desc[i].lock, flags);
> } else if (i == NR_IRQS) {
> seq_printf(p, "NMI: ");
> - for_each_cpu(j)
> + for_each_online_cpu(j)
> seq_printf(p, "%10u ", nmi_count(j));
> seq_putc(p, '\n');
> #ifdef CONFIG_X86_LOCAL_APIC
> seq_printf(p, "LOC: ");
> - for_each_cpu(j)
> + for_each_online_cpu(j)
> seq_printf(p, "%10u ",
> per_cpu(irq_stat,j).apic_timer_irqs);
> seq_putc(p, '\n');
> _
--
Cheers,
Ashok Raj
- Open Source Technology Center
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |