On Thursday 01 September 2005 18:09, John Stoffel wrote: > >>>>> "Dominik" == Dominik Karall <[email protected]> writes: > > Dominik> When I switch on my external harddisk, which is connected > Dominik> through usb, the kernel hangs. First time I did that at > Dominik> bootup there were a lot of backtraces printed on the screen > Dominik> but they did not find the way in the logfile :/ Now I > Dominik> switched the drive on while running and everything freezes > Dominik> after those messages: > > Dominik> usb 1-2.2: new high speed USB device using ehci_hcd and address 3 > Dominik> scsi2 : SCSI emulation for USB Mass Storage devices > Dominik> usb-storage: device found at 3 > Dominik> usb-storage: waiting for device to settle before scanning > Dominik> Vendor: ST325082 Model: 3A Rev: 3.02 > Dominik> Type: Direct-Access ANSI SCSI revision: > 00 Dominik> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) > Dominik> sda: assuming drive cache: write through > Dominik> SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) > Dominik> sda: assuming drive cache: write through > > Have you updated the firmware on the USB enclosure? I have one using > the Prolific chipset for both USB/Firewire and it was crappy until I > upgraded the firmware on there. It made all the difference. > > Also, can you use this USB enclosure on Windows or another computer? > And which kernel version are you running? It's not clear if your on > 2.6.13-mm1 or some other version. 2.6.13-mm1, as mentioned in subject. The external hdd worked with 2.6.13-rc6-mm1 and 2.6.13-ck1, which were the last versions I ran. Didn't test 2.6.13-rc6-mm2. > More details would be good too, such as: > > lsusb Bus 001 Device 004: ID 0840:009c Argosy Research, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0840 Argosy Research, Inc. idProduct 0x009c bcdDevice 0.01 iManufacturer 1 Generic iProduct 2 USB 2.0 Mass Storage Device iSerial 3 009C0000000049BD bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 dominik
Attachment:
pgpdFFSWOO7zt.pgp
Description: PGP signature
- Follow-Ups:
- Re: 2.6.13-mm1
- From: "John Stoffel" <[email protected]>
- Re: 2.6.13-mm1
- References:
- 2.6.13-mm1
- From: Andrew Morton <[email protected]>
- Re: 2.6.13-mm1
- From: Dominik Karall <[email protected]>
- Re: 2.6.13-mm1
- From: "John Stoffel" <[email protected]>
- 2.6.13-mm1
- Prev by Date: [SOLVED] USB Storage speed regression since 2.6.12
- Next by Date: Re: 2.6.13-rt3
- Previous by thread: Re: 2.6.13-mm1
- Next by thread: Re: 2.6.13-mm1
- Index(es):