RE: [RFC/PATCH]reconfigure MSI registers after resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wednesday, August 31, 2005 2:44 PM Greg KH wrote:
>>On Thu, Aug 18, 2005 at 01:35:46PM +0800, Shaohua Li wrote:
>> Hi,
>> It appears pci_enable_msi doesn't reconfigure msi registers if it
>> successfully look up a msi for a device. It assumes the data and
address
>> registers unchanged after calling pci_disable_msi. But this isn't
always
>> true, such as in a suspend/resume circle. In my test system, the
>> registers unsurprised become zero after a S3 resume. This patch fixes
my
>> problem, please look at it. MSIX might have the same issue, but I
>> haven't taken a close look.

> Tom, any comments on this?

In the cases of suspend/resume, a device driver needs to restore its PCI
configuration space registers, which include the MSI/MSI-X capability
structures if a device uses MSI/MSI-X. I think reconfiguring MSI
data/address each time a driver calls pci_enable_msi may not be
necessary.

Thanks,
Tom
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux