Linus Torvalds wrote:
> There it is.
>
> The most painful part of 2.6.13 is likely to be the fact that we made x86
> use the generic PCI bus setup code for assigning unassigned resources.
> That uncovered rather a lot of nasty small details, but should also mean
> that a lot of laptops in particular should be able to discover PCI devices
> behind bridges that the BIOS hasn't set up.
>
> We've hopefully fixed up all the problems that the longish -rc series
> showed, and it shouldn't be that painful, but if you have device problems,
> please make a report that at a minimum contains the unified diff of the
> output of "lspci -vvx" running on 2.6.12 vs 2.6.13. That might give us
> some clues.
On my machine, 2.6.13 doesn't detect my AGP ATI VGA card. 2.6.12.5 works just
fine.
However if I boot 2.6.13 with pci=biosirq the VGA card get's detected and
works fine.
Suggestions, anyone?
Mainboard = Asus P4B
VGA Card = Ati Rage 128 Pro
Kind Regards Nicolas
lspci:
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge
(rev 03)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev
03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 12)
00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 12)
00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12)
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 12)
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 12)
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 12)
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio (rev
12)
02:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 02)
02:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
02)
02:0b.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01)
02:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
78)
diff -u of lspci -vvx:
--- lspci-2.6.12.log 2005-09-01 08:29:28.000000000 +0200
+++ lspci-2.6.13.log 2005-08-31 23:31:30.000000000 +0200
@@ -7,7 +7,7 @@
Capabilities: [e4] #09 [0104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+
AGP3- Rate=x1,x2,x4
- Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
+ Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
00: 86 80 30 1a 06 00 90 20 03 00 00 06 00 00 00 00
10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 70 80
@@ -23,7 +23,7 @@
Prefetchable memory behind bridge: f3f00000-f7ffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00: 86 80 31 1a 07 00 a0 00 03 00 04 06 00 40 01 00
-10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 a0 22
+10: 00 00 00 00 00 00 00 00 00 01 01 00 d0 d0 a0 02
20: 80 f1 60 f2 f0 f3 f0 f7 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00
@@ -37,7 +37,7 @@
Prefetchable memory behind bridge: f2700000-f3efffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
00: 86 80 4e 24 07 01 80 00 12 00 04 06 00 00 01 00
-10: 00 00 00 00 00 00 00 00 00 02 02 20 b0 b0 80 a2
+10: 00 00 00 00 00 00 00 00 00 02 02 20 b0 b0 80 82
20: 80 f0 70 f1 70 f2 e0 f3 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
@@ -66,7 +66,7 @@
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
- Interrupt: pin D routed to IRQ 19
+ Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at a400 [size=32]
00: 86 80 42 24 05 00 80 02 12 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -89,7 +89,7 @@
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
- Interrupt: pin C routed to IRQ 23
+ Interrupt: pin C routed to IRQ 17
Region 4: I/O ports at a000 [size=32]
00: 86 80 44 24 05 00 80 02 12 00 03 0c 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
@@ -101,7 +101,7 @@
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
- Interrupt: pin B routed to IRQ 17
+ Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 9800 [size=256]
Region 1: I/O ports at 9400 [size=64]
00: 86 80 45 24 05 00 80 02 12 00 01 04 00 00 00 00
@@ -114,14 +114,14 @@
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
- Interrupt: pin A routed to IRQ 11
+ Interrupt: pin A routed to IRQ 20
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at f1800000 (32-bit, non-prefetchable) [size=16K]
- Expansion ROM at f3fe0000 [disabled] [size=128K]
+ Expansion ROM at f3f00000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW-
AGP3- Rate=x1,x2,x4
- Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
+ Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
@@ -159,10 +159,10 @@
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
- Interrupt: pin A routed to IRQ 23
+ Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at f1000000 (32-bit, non-prefetchable) [size=4K]
- Expansion ROM at <unassigned> [disabled] [size=64K]
+ Expansion ROM at f2720000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
@@ -176,10 +176,10 @@
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
- Interrupt: pin A routed to IRQ 20
+ Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at b400 [size=128]
Region 1: Memory at f0800000 (32-bit, non-prefetchable) [size=128]
- Expansion ROM at <unassigned> [disabled] [size=128K]
+ Expansion ROM at f2700000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |