This patch adds support for Marvell EV64360BP board. So far, it
supports mpsc serial console, gigabit ethernet, jffs2 root filesystem,
etc. Other device support, like watchdog, RTC, will be added later.
Please kindly review it for inclusion.
Signed-off-by: Lee Nicks <[email protected]>
======================================
diff -ruN linux-2.6.13-original/arch/ppc/boot/simple/Makefile
linux-2.6.13/arch/ppc/boot/simple/Makefile
--- linux-2.6.13-original/arch/ppc/boot/simple/Makefile 2005-08-28
22:44:35.000000000 -0700
+++ linux-2.6.13/arch/ppc/boot/simple/Makefile 2005-08-28
22:51:37.000000000 -0700
@@ -108,6 +108,10 @@
end-$(CONFIG_RADSTONE_PPC7D) := radstone_ppc7d
cacheflag-$(CONFIG_RADSTONE_PPC7D) := -include $(clear_L2_L3)
+ extra.o-$(CONFIG_EV64360) := misc-ev64360.o
+ end-$(CONFIG_EV64360) := ev64360
+ cacheflag-$(CONFIG_EV64360) := -include $(clear_L2_L3)
+
# kconfig 'feature', only one of these will ever be 'y' at a time.
# The rest will be unset.
motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
diff -ruN linux-2.6.13-original/arch/ppc/boot/simple/misc-ev64360.c
linux-2.6.13/arch/ppc/boot/simple/misc-ev64360.c
--- linux-2.6.13-original/arch/ppc/boot/simple/misc-ev64360.c 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.13/arch/ppc/boot/simple/misc-ev64360.c 2005-08-28
22:51:37.000000000 -0700
@@ -0,0 +1,44 @@
+/*
+ * arch/ppc/boot/simple/misc-ev64360.c
+ * Copyright (C) 2005 Lee Nicks <[email protected]>
+ *
+ * Based on arch/ppc/boot/simple/misc-katana.c from:
+ * Mark A. Greer <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/mv64x60_defs.h>
+#include <platforms/ev64360.h>
+
+extern u32 mv64x60_console_baud;
+extern u32 mv64x60_mpsc_clk_src;
+extern u32 mv64x60_mpsc_clk_freq;
+
+/* Not in the kernel so won't include kernel.h to get its 'min' definition */
+#ifndef min
+#define min(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+void
+mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
+{
+ mv64x60_console_baud = EV64360_DEFAULT_BAUD;
+ mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC;
+ mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
+}
diff -ruN linux-2.6.13-original/arch/ppc/boot/simple/mv64x60_tty.c
linux-2.6.13/arch/ppc/boot/simple/mv64x60_tty.c
--- linux-2.6.13-original/arch/ppc/boot/simple/mv64x60_tty.c 2005-08-28
22:44:35.000000000 -0700
+++ linux-2.6.13/arch/ppc/boot/simple/mv64x60_tty.c 2005-08-28
22:51:37.000000000 -0700
@@ -22,9 +22,16 @@
#include <asm/mv64x60_defs.h>
#include <mpsc_defs.h>
+#ifdef CONFIG_EV64360
+#include <platforms/ev64360.h>
+u32 mv64x60_console_baud = EV64360_DEFAULT_BAUD;
+u32 mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */
+u32 mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
+#else
u32 mv64x60_console_baud = 9600;
u32 mv64x60_mpsc_clk_src = 8; /* TCLK */
u32 mv64x60_mpsc_clk_freq = 100000000;
+#endif
extern void udelay(long);
static void stop_dma(int chan);
diff -ruN linux-2.6.13-original/arch/ppc/Kconfig linux-2.6.13/arch/ppc/Kconfig
--- linux-2.6.13-original/arch/ppc/Kconfig 2005-08-28 22:44:40.000000000 -0700
+++ linux-2.6.13/arch/ppc/Kconfig 2005-08-28 22:51:37.000000000 -0700
@@ -713,6 +713,11 @@
help
This option enables support for the MPC 834x SYS evaluation board.
+config EV64360
+ bool "Marvell-EV64360BP"
+ help
+ Select EV64360 if configuring a Marvell EV64360BP Evaluation
+ platform.
endchoice
config PQ2ADS
@@ -814,7 +819,7 @@
config MV64360 # Really MV64360 & MV64460
bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
+ depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
default y
config MV64X60
diff -ruN linux-2.6.13-original/arch/ppc/platforms/ev64360.c
linux-2.6.13/arch/ppc/platforms/ev64360.c
--- linux-2.6.13-original/arch/ppc/platforms/ev64360.c 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.13/arch/ppc/platforms/ev64360.c 2005-08-28
22:51:37.000000000 -0700
@@ -0,0 +1,510 @@
+/*
+ * arch/ppc/platforms/ev64360.c
+ *
+ * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
+ *
+ * Author: Lee Nicks <[email protected]>
+ *
+ * Based on code done by Rabeeh Khoury - [email protected]
+ * Based on code done by - Mark A. Greer <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/bootmem.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx.h>
+#ifdef CONFIG_BOOTIMG
+#include <linux/bootimg.h>
+#endif
+#include <asm/page.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppcboot.h>
+#include <asm/mv64x60.h>
+#include <platforms/ev64360.h>
+
+#define BOARD_VENDOR "Marvell"
+#define BOARD_MACHINE "EV-64360-BP"
+
+static struct mv64x60_handle bh;
+static void __iomem *sram_base;
+
+static u32 ev64360_flash_size_0;
+static u32 ev64360_flash_size_1;
+
+static u32 ev64360_bus_frequency;
+
+unsigned char __res[sizeof(bd_t)];
+
+static int __init
+ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ return 0;
+}
+
+static void __init
+ev64360_setup_bridge(void)
+{
+ struct mv64x60_setup_info si;
+ int i;
+
+ memset(&si, 0, sizeof(si));
+
+ si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
+
+ #ifdef CONFIG_PCI
+ si.pci_1.enable_bus = 1;
+ si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
+ si.pci_1.pci_io.pci_base_hi = 0;
+ si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
+ si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
+ si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
+ si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
+ si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
+ si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
+ si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
+ si.pci_1.pci_cmd_bits = 0;
+ si.pci_1.latency_timer = 0x80;
+ #else
+ si.pci_0.enable_bus = 0;
+ si.pci_1.enable_bus = 0;
+ #endif
+
+ for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ si.cpu_prot_options[i] = 0;
+ si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
+ si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
+ si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
+
+ si.pci_1.acc_cntl_options[i] =
+ MV64360_PCI_ACC_CNTL_SNOOP_NONE |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
+ MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+#else
+ si.cpu_prot_options[i] = 0;
+ si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
+ si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
+ si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
+
+ si.pci_1.acc_cntl_options[i] =
+ MV64360_PCI_ACC_CNTL_SNOOP_WB |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
+ MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+#endif
+ }
+
+ if (mv64x60_init(&bh, &si))
+ printk(KERN_WARNING "Bridge initialization failed.\n");
+
+ #ifdef CONFIG_PCI
+ pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = ev64360_map_irq;
+ ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
+
+ mv64x60_set_bus(&bh, 1, 0);
+ bh.hose_b->first_busno = 0;
+ bh.hose_b->last_busno = 0xff;
+ #endif
+}
+
+/* Bridge & platform setup routines */
+void __init
+ev64360_intr_setup(void)
+{
+ /* MPP 8, 9, and 10 */
+ mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
+
+ /*
+ * Define GPP 8,9,and 10 interrupt polarity as active low
+ * input signal and level triggered
+ */
+ mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
+ mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
+
+ /* Config GPP intr ctlr to respond to level trigger */
+ mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
+
+ /* Erranum FEr PCI-#8 */
+ mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
+
+ /*
+ * Dismiss and then enable interrupt on GPP interrupt cause
+ * for CPU #0
+ */
+ mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
+ mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
+
+ /*
+ * Dismiss and then enable interrupt on CPU #0 high cause reg
+ * BIT25 summarizes GPP interrupts 8-15
+ */
+ mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
+}
+
+void __init
+ev64360_setup_peripherals(void)
+{
+ u32 base;
+
+ /* Set up window for boot CS */
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
+ EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
+
+ /* We only use the 32-bit flash */
+ mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
+ &ev64360_flash_size_0);
+ ev64360_flash_size_1 = 0;
+
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
+ EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
+
+ mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
+ EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
+ bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
+ sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
+
+ /* Set up Enet->SRAM window */
+ mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
+ EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
+ bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
+
+ /* Give enet r/w access to memory region */
+ mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
+ mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
+ mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
+
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
+ mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
+ ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
+
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
+#else
+ mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
+#endif
+
+ /*
+ * Setting the SRAM to 0. Note that this generates parity errors on
+ * internal data path in SRAM since it's first time accessing it
+ * while after reset it's not configured.
+ */
+ memset(sram_base, 0, MV64360_SRAM_SIZE);
+
+ /* set up PCI interrupt controller */
+ ev64360_intr_setup();
+}
+
+static void __init
+ev64360_setup_arch(void)
+{
+ if (ppc_md.progress)
+ ppc_md.progress("ev64360_setup_arch: enter", 0);
+
+ set_tb(0, 0);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_SDA2;
+#endif
+
+ /*
+ * Set up the L2CR register.
+ */
+ _set_L2CR(L2CR_L2E | L2CR_L2PE);
+
+ if (ppc_md.progress)
+ ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
+
+ ev64360_setup_bridge();
+ ev64360_setup_peripherals();
+ ev64360_bus_frequency = ev64360_bus_freq();
+
+ printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
+ "([email protected])\n", BOARD_VENDOR, BOARD_MACHINE);
+ if (ppc_md.progress)
+ ppc_md.progress("ev64360_setup_arch: exit", 0);
+}
+
+/* Platform device data fixup routines. */
+#if defined(CONFIG_SERIAL_MPSC)
+static void __init
+ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
+{
+ struct mpsc_pdata *pdata;
+
+ pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+
+ pdata->max_idle = 40;
+ pdata->default_baud = EV64360_DEFAULT_BAUD;
+ pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
+ /*
+ * TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts,
+ * TCLK == SysCLK but on 64460, they are separate pins.
+ * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
+ */
+ pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
+}
+#endif
+
+#if defined(CONFIG_MV643XX_ETH)
+static void __init
+ev64360_fixup_eth_pdata(struct platform_device *pdev)
+{
+ struct mv643xx_eth_platform_data *eth_pd;
+ static u16 phy_addr[] = {
+ EV64360_ETH0_PHY_ADDR,
+ EV64360_ETH1_PHY_ADDR,
+ EV64360_ETH2_PHY_ADDR,
+ };
+
+ eth_pd = pdev->dev.platform_data;
+ eth_pd->force_phy_addr = 1;
+ eth_pd->phy_addr = phy_addr[pdev->id];
+ eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
+ eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
+}
+#endif
+
+static int __init
+ev64360_platform_notify(struct device *dev)
+{
+ static struct {
+ char *bus_id;
+ void ((*rtn)(struct platform_device *pdev));
+ } dev_map[] = {
+#if defined(CONFIG_SERIAL_MPSC)
+ { MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
+ { MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
+#endif
+#if defined(CONFIG_MV643XX_ETH)
+ { MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
+ { MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
+ { MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
+#endif
+ };
+ struct platform_device *pdev;
+ int i;
+
+ if (dev && dev->bus_id)
+ for (i=0; i<ARRAY_SIZE(dev_map); i++)
+ if (!strncmp(dev->bus_id, dev_map[i].bus_id,
+ BUS_ID_SIZE)) {
+
+ pdev = container_of(dev,
+ struct platform_device, dev);
+ dev_map[i].rtn(pdev);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_MTD_PHYSMAP
+
+#ifndef MB
+#define MB (1 << 20)
+#endif
+
+/*
+ * MTD Layout.
+ *
+ * FLASH Amount: 0xff000000 - 0xffffffff
+ * ------------- -----------------------
+ * Reserved: 0xff000000 - 0xff03ffff
+ * JFFS2 file system: 0xff040000 - 0xffefffff
+ * U-boot: 0xfff00000 - 0xffffffff
+ */
+static int __init
+ev64360_setup_mtd(void)
+{
+ u32 size;
+ int ptbl_entries;
+ static struct mtd_partition *ptbl;
+
+ size = ev64360_flash_size_0 + ev64360_flash_size_1;
+ if (!size)
+ return -ENOMEM;
+
+ ptbl_entries = 3;
+
+ if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition),
+ GFP_KERNEL)) == NULL) {
+
+ printk(KERN_WARNING "Can't alloc MTD partition table\n");
+ return -ENOMEM;
+ }
+ memset(ptbl, 0, ptbl_entries * sizeof(struct mtd_partition));
+
+ ptbl[0].name = "reserved";
+ ptbl[0].offset = 0;
+ ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
+ ptbl[1].name = "jffs2";
+ ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
+ ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
+ ptbl[2].name = "U-BOOT";
+ ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
+ ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
+
+ physmap_map.size = size;
+ physmap_set_partitions(ptbl, ptbl_entries);
+ return 0;
+}
+
+arch_initcall(ev64360_setup_mtd);
+#endif
+
+static void
+ev64360_restart(char *cmd)
+{
+ ulong i = 0xffffffff;
+ volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
+
+ /* issue hard reset */
+ rtc_base[0xf] = 0x80;
+ rtc_base[0xc] = 0x00;
+ rtc_base[0xd] = 0x01;
+ rtc_base[0xf] = 0x83;
+
+ while (i-- > 0) ;
+ panic("restart failed\n");
+}
+
+static void
+ev64360_halt(void)
+{
+ while (1) ;
+ /* NOTREACHED */
+}
+
+static void
+ev64360_power_off(void)
+{
+ ev64360_halt();
+ /* NOTREACHED */
+}
+
+static int
+ev64360_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
+ seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
+ seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
+
+ return 0;
+}
+
+static void __init
+ev64360_calibrate_decr(void)
+{
+ u32 freq;
+
+ freq = ev64360_bus_frequency / 4;
+
+ printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+ (long)freq / 1000000, (long)freq % 1000000);
+
+ tb_ticks_per_jiffy = freq / HZ;
+ tb_to_us = mulhwu_scale_factor(freq, 1000000);
+}
+
+unsigned long __init
+ev64360_find_end_of_memory(void)
+{
+ return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
+ MV64x60_TYPE_MV64360);
+}
+
+static inline void
+ev64360_set_bat(void)
+{
+ mb();
+ mtspr(SPRN_DBAT2U, 0xf0001ffe);
+ mtspr(SPRN_DBAT2L, 0xf000002a);
+ mb();
+}
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+static void __init
+ev64360_map_io(void)
+{
+ io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
+ CONFIG_MV64X60_NEW_BASE, \
+ 0x00020000, _PAGE_IO);
+}
+#endif
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ parse_bootinfo(find_bootinfo());
+
+ /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer)
+ * are non-zero, then we should use the board info from the bd_t
+ * structure and the cmdline pointed to by r6 instead of the
+ * information from birecs, if any. Otherwise, use the information
+ * from birecs as discovered by the preceeding call to
+ * parse_bootinfo(). This rule should work with both PPCBoot, which
+ * uses a bd_t board info structure, and the kernel boot wrapper,
+ * which uses birecs.
+ */
+ if (r3 && r6) {
+ /* copy board info structure */
+ memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+ /* copy command line */
+ *(char *)(r7+KERNELBASE) = 0;
+ strcpy(cmd_line, (char *)(r6+KERNELBASE));
+ }
+ #ifdef CONFIG_ISA
+ isa_mem_base = 0;
+ #endif
+
+ ppc_md.setup_arch = ev64360_setup_arch;
+ ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
+ ppc_md.init_IRQ = mv64360_init_irq;
+ ppc_md.get_irq = mv64360_get_irq;
+ ppc_md.restart = ev64360_restart;
+ ppc_md.power_off = ev64360_power_off;
+ ppc_md.halt = ev64360_halt;
+ ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
+ ppc_md.calibrate_decr = ev64360_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
+ ppc_md.setup_io_mappings = ev64360_map_io;
+ ppc_md.progress = mv64x60_mpsc_progress;
+ mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
+#endif
+
+#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
+ platform_notify = ev64360_platform_notify;
+#endif
+
+ ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
+}
diff -ruN linux-2.6.13-original/arch/ppc/platforms/ev64360.h
linux-2.6.13/arch/ppc/platforms/ev64360.h
--- linux-2.6.13-original/arch/ppc/platforms/ev64360.h 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.13/arch/ppc/platforms/ev64360.h 2005-08-28
22:51:37.000000000 -0700
@@ -0,0 +1,116 @@
+/*
+ * arch/ppc/platforms/ev64360.h
+ *
+ * Definitions for Marvell EV-64360-BP Evaluation Board.
+ *
+ * Author: Lee Nicks <[email protected]>
+ *
+ * Based on code done by Rabeeh Khoury - [email protected]
+ * Based on code done by Mark A. Greer <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
+ * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
+ * We'll only use one PCI MEM window on each PCI bus.
+ *
+ * This is the CPU physical memory map (windows must be at least 64
KB and start
+ * on a boundary that is a multiple of the window size):
+ *
+ * 0x42000000-0x4203ffff - Internal SRAM
+ * 0xf1000000-0xf100ffff - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
+ * 0xfc800000-0xfcffffff - RTC
+ * 0xff000000-0xffffffff - Boot window, 16 MB flash
+ * 0xc0000000-0xc3ffffff - PCI I/O (second hose)
+ * 0x80000000-0xbfffffff - PCI MEM (second hose)
+ */
+
+#ifndef __PPC_PLATFORMS_EV64360_H
+#define __PPC_PLATFORMS_EV64360_H
+
+/* CPU Physical Memory Map setup. */
+#define EV64360_BOOT_WINDOW_BASE 0xff000000
+#define EV64360_BOOT_WINDOW_SIZE 0x01000000 /* 16 MB */
+#define EV64360_INTERNAL_SRAM_BASE 0x42000000
+#define EV64360_RTC_WINDOW_BASE 0xfc800000
+#define EV64360_RTC_WINDOW_SIZE 0x00800000 /* 8 MB */
+
+#define EV64360_PCI1_MEM_START_PROC_ADDR 0x80000000
+#define EV64360_PCI1_MEM_START_PCI_HI_ADDR 0x00000000
+#define EV64360_PCI1_MEM_START_PCI_LO_ADDR 0x80000000
+#define EV64360_PCI1_MEM_SIZE 0x40000000 /* 1 GB */
+#define EV64360_PCI1_IO_START_PROC_ADDR 0xc0000000
+#define EV64360_PCI1_IO_START_PCI_ADDR 0x00000000
+#define EV64360_PCI1_IO_SIZE 0x04000000 /* 64 MB */
+
+#define EV64360_DEFAULT_BAUD 115200
+#define EV64360_MPSC_CLK_SRC 8 /* TCLK */
+#define EV64360_MPSC_CLK_FREQ 133333333
+
+#define EV64360_MTD_RESERVED_SIZE 0x40000
+#define EV64360_MTD_JFFS2_SIZE 0xec0000
+#define EV64360_MTD_UBOOT_SIZE 0x100000
+
+#define EV64360_ETH0_PHY_ADDR 8
+#define EV64360_ETH1_PHY_ADDR 9
+#define EV64360_ETH2_PHY_ADDR 10
+
+#define EV64360_ETH_TX_QUEUE_SIZE 800
+#define EV64360_ETH_RX_QUEUE_SIZE 400
+
+#define EV64360_ETH_PORT_CONFIG_VALUE \
+ ETH_UNICAST_NORMAL_MODE | \
+ ETH_DEFAULT_RX_QUEUE_0 | \
+ ETH_DEFAULT_RX_ARP_QUEUE_0 | \
+ ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP | \
+ ETH_RECEIVE_BC_IF_IP | \
+ ETH_RECEIVE_BC_IF_ARP | \
+ ETH_CAPTURE_TCP_FRAMES_DIS | \
+ ETH_CAPTURE_UDP_FRAMES_DIS | \
+ ETH_DEFAULT_RX_TCP_QUEUE_0 | \
+ ETH_DEFAULT_RX_UDP_QUEUE_0 | \
+ ETH_DEFAULT_RX_BPDU_QUEUE_0
+
+#define EV64360_ETH_PORT_CONFIG_EXTEND_VALUE \
+ ETH_SPAN_BPDU_PACKETS_AS_NORMAL | \
+ ETH_PARTITION_DISABLE
+
+#define GT_ETH_IPG_INT_RX(value) \
+ ((value & 0x3fff) << 8)
+
+#define EV64360_ETH_PORT_SDMA_CONFIG_VALUE \
+ ETH_RX_BURST_SIZE_4_64BIT | \
+ GT_ETH_IPG_INT_RX(0) | \
+ ETH_TX_BURST_SIZE_4_64BIT
+
+#define EV64360_ETH_PORT_SERIAL_CONTROL_VALUE \
+ ETH_FORCE_LINK_PASS | \
+ ETH_ENABLE_AUTO_NEG_FOR_DUPLX | \
+ ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL | \
+ ETH_ADV_SYMMETRIC_FLOW_CTRL | \
+ ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
+ ETH_FORCE_BP_MODE_NO_JAM | \
+ BIT9 | \
+ ETH_DO_NOT_FORCE_LINK_FAIL | \
+ ETH_RETRANSMIT_16_ATTEMPTS | \
+ ETH_ENABLE_AUTO_NEG_SPEED_GMII | \
+ ETH_DTE_ADV_0 | \
+ ETH_DISABLE_AUTO_NEG_BYPASS | \
+ ETH_AUTO_NEG_NO_CHANGE | \
+ ETH_MAX_RX_PACKET_9700BYTE | \
+ ETH_CLR_EXT_LOOPBACK | \
+ ETH_SET_FULL_DUPLEX_MODE | \
+ ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
+
+static inline u32
+ev64360_bus_freq(void)
+{
+ return 133333333;
+}
+
+#endif /* __PPC_PLATFORMS_EV64360_H */
diff -ruN linux-2.6.13-original/arch/ppc/platforms/Makefile
linux-2.6.13/arch/ppc/platforms/Makefile
--- linux-2.6.13-original/arch/ppc/platforms/Makefile 2005-08-28
22:44:36.000000000 -0700
+++ linux-2.6.13/arch/ppc/platforms/Makefile 2005-08-28 22:51:37.000000000 -0700
@@ -46,6 +46,7 @@
obj-$(CONFIG_SBC82xx) += sbc82xx.o
obj-$(CONFIG_SPRUCE) += spruce.o
obj-$(CONFIG_LITE5200) += lite5200.o
+obj-$(CONFIG_EV64360) += ev64360.o
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |