Hi,
this patch fixes a severe problem with 2.6.13-rc7.
Due to recent SCSI changes it is not possible to add any
LUNs to the zfcp device driver anymore. With registration
of remote ports this is fixed.
Please integrate the patch in the 2.6.13 kernel or if it
is already too late for this release then please integrate it
in 2.6.13.1
Thanks a lot.
Regards,
Andreas
Signed-off-by: Andreas Herrmann <[email protected]>
diffstat:
zfcp_aux.c | 29 +++++++----------------------
zfcp_ccw.c | 10 ++++++++++
zfcp_def.h | 2 +-
zfcp_erp.c | 25 ++++++++++++++++++++++---
zfcp_ext.h | 2 ++
zfcp_fsf.c | 1 +
zfcp_scsi.c | 25 ++++++++++++++++++++-----
7 files changed, 63 insertions(+), 31 deletions(-)
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_aux.c linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_aux.c
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_aux.c 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_aux.c 2005-08-27 13:05:17.000000000 +0200
@@ -1299,13 +1299,10 @@
zfcp_port_enqueue(struct zfcp_adapter *adapter, wwn_t wwpn, u32 status,
u32 d_id)
{
- struct zfcp_port *port, *tmp_port;
+ struct zfcp_port *port;
int check_wwpn;
- scsi_id_t scsi_id;
- int found;
check_wwpn = !(status & ZFCP_STATUS_PORT_NO_WWPN);
-
/*
* check that there is no port with this WWPN already in list
*/
@@ -1368,7 +1365,7 @@
} else {
snprintf(port->sysfs_device.bus_id,
BUS_ID_SIZE, "0x%016llx", wwpn);
- port->sysfs_device.parent = &adapter->ccw_device->dev;
+ port->sysfs_device.parent = &adapter->ccw_device->dev;
}
port->sysfs_device.release = zfcp_sysfs_port_release;
dev_set_drvdata(&port->sysfs_device, port);
@@ -1388,24 +1385,8 @@
zfcp_port_get(port);
- scsi_id = 1;
- found = 0;
write_lock_irq(&zfcp_data.config_lock);
- list_for_each_entry(tmp_port, &adapter->port_list_head, list) {
- if (atomic_test_mask(ZFCP_STATUS_PORT_NO_SCSI_ID,
- &tmp_port->status))
- continue;
- if (tmp_port->scsi_id != scsi_id) {
- found = 1;
- break;
- }
- scsi_id++;
- }
- port->scsi_id = scsi_id;
- if (found)
- list_add_tail(&port->list, &tmp_port->list);
- else
- list_add_tail(&port->list, &adapter->port_list_head);
+ list_add_tail(&port->list, &adapter->port_list_head);
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status);
if (d_id == ZFCP_DID_DIRECTORY_SERVICE)
@@ -1422,11 +1403,15 @@
void
zfcp_port_dequeue(struct zfcp_port *port)
{
+ struct fc_port *rport;
+
zfcp_port_wait(port);
write_lock_irq(&zfcp_data.config_lock);
list_del(&port->list);
port->adapter->ports--;
write_unlock_irq(&zfcp_data.config_lock);
+ if (port->rport)
+ fc_remote_port_delete(rport);
zfcp_adapter_put(port->adapter);
zfcp_sysfs_port_remove_files(&port->sysfs_device,
atomic_read(&port->status));
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_ccw.c linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_ccw.c
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_ccw.c 2005-03-02 08:37:50.000000000 +0100
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_ccw.c 2005-08-27 13:28:35.000000000 +0200
@@ -202,9 +202,19 @@
zfcp_ccw_set_offline(struct ccw_device *ccw_device)
{
struct zfcp_adapter *adapter;
+ struct zfcp_port *port;
+ struct fc_port *rport;
down(&zfcp_data.config_sema);
adapter = dev_get_drvdata(&ccw_device->dev);
+ /* might be racy, but we cannot take config_lock due to the fact that
+ fc_remote_port_delete might sleep */
+ list_for_each_entry(port, &adapter->port_list_head, list)
+ if (port->rport) {
+ rport = port->rport;
+ port->rport = NULL;
+ fc_remote_port_delete(rport);
+ }
zfcp_erp_adapter_shutdown(adapter, 0);
zfcp_erp_wait(adapter);
zfcp_adapter_scsi_unregister(adapter);
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_def.h linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_def.h
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_def.h 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_def.h 2005-08-26 19:00:18.000000000 +0200
@@ -906,6 +906,7 @@
*/
struct zfcp_port {
struct device sysfs_device; /* sysfs device */
+ struct fc_rport *rport; /* rport of fc transport class */
struct list_head list; /* list of remote ports */
atomic_t refcount; /* reference count */
wait_queue_head_t remove_wq; /* can be used to wait for
@@ -916,7 +917,6 @@
list */
u32 units; /* # of logical units in list */
atomic_t status; /* status of this remote port */
- scsi_id_t scsi_id; /* own SCSI ID */
wwn_t wwnn; /* WWNN if known */
wwn_t wwpn; /* WWPN */
fc_id_t d_id; /* D_ID */
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_erp.c linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_erp.c
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_erp.c 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_erp.c 2005-08-27 12:38:50.000000000 +0200
@@ -3360,13 +3360,32 @@
if ((result == ZFCP_ERP_SUCCEEDED)
&& (!atomic_test_mask(ZFCP_STATUS_UNIT_TEMPORARY,
&unit->status))
- && (!unit->device))
- scsi_add_device(unit->port->adapter->scsi_host, 0,
- unit->port->scsi_id, unit->scsi_lun);
+ && !unit->device
+ && port->rport)
+ scsi_add_device(port->adapter->scsi_host, 0,
+ port->rport->scsi_target_id,
+ unit->scsi_lun);
zfcp_unit_put(unit);
break;
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
case ZFCP_ERP_ACTION_REOPEN_PORT:
+ if ((result == ZFCP_ERP_SUCCEEDED)
+ && !atomic_test_mask(ZFCP_STATUS_PORT_NO_WWPN,
+ &port->status)
+ && !port->rport) {
+ struct fc_rport_identifiers ids;
+ ids.node_name = port->wwnn;
+ ids.port_name = port->wwpn;
+ ids.port_id = port->d_id;
+ ids.roles = FC_RPORT_ROLE_FCP_TARGET;
+ port->rport =
+ fc_remote_port_add(adapter->scsi_host, 0, &ids);
+ if (!port->rport)
+ ZFCP_LOG_NORMAL("failed registration of rport"
+ "(adapter %s, wwpn=0x%016Lx)\n",
+ zfcp_get_busid_by_port(port),
+ port->wwpn);
+ }
zfcp_port_put(port);
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_ext.h linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_ext.h
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_ext.h 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_ext.h 2005-08-26 19:00:18.000000000 +0200
@@ -143,6 +143,8 @@
struct scsi_cmnd *, struct timer_list *);
extern int zfcp_scsi_command_sync(struct zfcp_unit *, struct scsi_cmnd *,
struct timer_list *);
+extern void zfcp_set_fc_host_attrs(struct zfcp_adapter *);
+extern void zfcp_set_fc_rport_attrs(struct zfcp_port *);
extern struct scsi_transport_template *zfcp_transport_template;
extern struct fc_function_template zfcp_transport_functions;
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_fsf.c linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_fsf.c
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_fsf.c 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_fsf.c 2005-08-26 19:00:18.000000000 +0200
@@ -2062,6 +2062,7 @@
zfcp_erp_adapter_shutdown(adapter, 0);
return -EIO;
}
+ zfcp_set_fc_host_attrs(adapter);
return 0;
}
diff -urN linux-2.6.13-rcx/drivers/s390/scsi/zfcp_scsi.c linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_scsi.c
--- linux-2.6.13-rcx/drivers/s390/scsi/zfcp_scsi.c 2005-08-25 10:53:15.000000000 +0200
+++ linux-2.6.13-zfcpfctc/drivers/s390/scsi/zfcp_scsi.c 2005-08-26 19:05:10.000000000 +0200
@@ -389,7 +389,7 @@
struct zfcp_unit *unit, *retval = NULL;
list_for_each_entry(port, &adapter->port_list_head, list) {
- if (id != port->scsi_id)
+ if (!port->rport || (id != port->rport->scsi_target_id))
continue;
list_for_each_entry(unit, &port->unit_list_head, list) {
if (lun == unit->scsi_lun) {
@@ -408,7 +408,7 @@
struct zfcp_port *port;
list_for_each_entry(port, &adapter->port_list_head, list) {
- if (id == port->scsi_id)
+ if (port->rport && (id == port->rport->scsi_target_id))
return port;
}
return (struct zfcp_port *) NULL;
@@ -634,7 +634,6 @@
{
int retval;
struct zfcp_unit *unit = (struct zfcp_unit *) scpnt->device->hostdata;
- struct Scsi_Host *scsi_host = scpnt->device->host;
if (!unit) {
ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n");
@@ -729,7 +728,6 @@
{
int retval = 0;
struct zfcp_unit *unit;
- struct Scsi_Host *scsi_host = scpnt->device->host;
unit = (struct zfcp_unit *) scpnt->device->hostdata;
ZFCP_LOG_NORMAL("bus reset because of problems with "
@@ -753,7 +751,6 @@
{
int retval = 0;
struct zfcp_unit *unit;
- struct Scsi_Host *scsi_host = scpnt->device->host;
unit = (struct zfcp_unit *) scpnt->device->hostdata;
ZFCP_LOG_NORMAL("host reset because of problems with "
@@ -833,6 +830,7 @@
shost = adapter->scsi_host;
if (!shost)
return;
+ fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
adapter->scsi_host = NULL;
@@ -906,6 +904,18 @@
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
}
+void
+zfcp_set_fc_host_attrs(struct zfcp_adapter *adapter)
+{
+ struct Scsi_Host *shost = adapter->scsi_host;
+
+ fc_host_node_name(shost) = adapter->wwnn;
+ fc_host_port_name(shost) = adapter->wwpn;
+ strncpy(fc_host_serial_number(shost), adapter->serial_number,
+ min(FC_SERIAL_NUMBER_SIZE, 32));
+ fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
+}
+
struct fc_function_template zfcp_transport_functions = {
.get_starget_port_id = zfcp_get_port_id,
.get_starget_port_name = zfcp_get_port_name,
@@ -913,6 +923,11 @@
.show_starget_port_id = 1,
.show_starget_port_name = 1,
.show_starget_node_name = 1,
+ .show_rport_supported_classes = 1,
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_serial_number = 1,
};
/**
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |