Re: new qla2xxx driver breaks SAN setup with 2 controllers

[Frederik Schueler <fs@lowpingbastards.de>]

Hello,

your patch works!

first a box booting from a gdth:

a01:~# lsscsi 
[0:0:0:0]    disk    ICP      Host Drive  #00        /dev/sda
[0:2:6:0]    process SUPER    GEM318           0     -       
[1:0:0:10]   disk    IFT      A16F-R1211       334B  /dev/sdb
[1:0:0:12]   disk    IFT      A16F-R1211       334B  /dev/sdc
[1:0:0:14]   disk    IFT      A16F-R1211       334B  /dev/sdd
[1:0:1:9]    disk    IFT      A16F-R1211       334B  /dev/sde
[1:0:1:11]   disk    IFT      A16F-R1211       334B  /dev/sdf
[1:0:1:13]   disk    IFT      A16F-R1211       334B  /dev/sdg


and this is one of the cluster nodes, wich boots from san:

s06:~# lsscsi 
[0:0:0:3]    disk    IFT      A16F-R1211       334B  /dev/sda
[0:0:0:10]   disk    IFT      A16F-R1211       334B  /dev/sdb
[0:0:0:12]   disk    IFT      A16F-R1211       334B  /dev/sdc
[0:0:0:14]   disk    IFT      A16F-R1211       334B  /dev/sdd
[0:0:1:9]    disk    IFT      A16F-R1211       334B  /dev/sde
[0:0:1:11]   disk    IFT      A16F-R1211       334B  /dev/sdf
[0:0:1:13]   disk    IFT      A16F-R1211       334B  /dev/sdg


it finds everything on bootup.


Best regards
Frederik Schueler

-- 
ENOSIG

Attachment: signature.asc
Description: Digital signature