2.6.13-rc7 qla2xxx unaligned accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2.6.13-rc7 + kdb on ia64.  The qla2xxx drivers are getting unaligned
accesses at startup.

qla2300 0000:01:02.0: Found an ISP2312, irq 66, iobase 0xc00000080f300000
qla2300 0000:01:02.0: Configuring PCI space...
PCI: slot 0000:01:02.0 has incorrect PCI cache line size of 0 bytes, correcting to 128
qla2300 0000:01:02.0: Configure NVRAM parameters...
qla2300 0000:01:02.0: Verifying loaded RISC code...
qla2300 0000:01:02.0: Waiting for LIP to complete...
qla2300 0000:01:02.0: Cable is unplugged...
scsi1 : qla2xxx
kernel unaligned access to 0xe00000300667800c, ip=0xa0000001005cd0b1
qla2300 0000:01:02.0:
 QLogic Fibre Channel HBA Driver: 8.01.00b5-k
  QLogic QLA2342 -
  ISP2312: PCI (66 MHz) @ 0000:01:02.0 hdma+, host#=1, fw=3.03.15 IPX
ACPI: PCI Interrupt 0000:01:02.1[B]: no GSI
qla2300 0000:01:02.1: Found an ISP2312, irq 67, iobase 0xc00000080f301000
qla2300 0000:01:02.1: Configuring PCI space...
PCI: slot 0000:01:02.1 has incorrect PCI cache line size of 0 bytes, correcting to 128
qla2300 0000:01:02.1: Configure NVRAM parameters...
qla2300 0000:01:02.1: Verifying loaded RISC code...
qla2300 0000:01:02.1: Waiting for LIP to complete...
qla2300 0000:01:02.1: Cable is unplugged...
scsi2 : qla2xxx
kernel unaligned access to 0xe0000030066a400c, ip=0xa0000001005cd0b1
qla2300 0000:01:02.1:
 QLogic Fibre Channel HBA Driver: 8.01.00b5-k
  QLogic QLA2342 -
  ISP2312: PCI (66 MHz) @ 0000:01:02.1 hdma+, host#=2, fw=3.03.15 IPX
ACPI: PCI Interrupt 0000:02:02.0[A]: no GSI
qla2300 0000:02:02.0: Found an ISP2312, irq 63, iobase 0xc00000080fa40000
qla2300 0000:02:02.0: Configuring PCI space...
qla2300 0000:02:02.0: Configure NVRAM parameters...
qla2300 0000:02:02.0: Verifying loaded RISC code...
qla2300 0000:02:02.0: Waiting for LIP to complete...
qla2300 0000:02:02.0: Cable is unplugged...
scsi3 : qla2xxx
kernel unaligned access to 0xe0000030066c000c, ip=0xa0000001005cd0b1
qla2300 0000:02:02.0:
 QLogic Fibre Channel HBA Driver: 8.01.00b5-k
  QLogic QLA2342 -
  ISP2312: PCI-X (133 MHz) @ 0000:02:02.0 hdma+, host#=3, fw=3.03.15 IPX
ACPI: PCI Interrupt 0000:02:02.1[B]: no GSI
qla2300 0000:02:02.1: Found an ISP2312, irq 64, iobase 0xc00000080fa41000
qla2300 0000:02:02.1: Configuring PCI space...
qla2300 0000:02:02.1: Configure NVRAM parameters...
qla2300 0000:02:02.1: Verifying loaded RISC code...
qla2300 0000:02:02.1: Waiting for LIP to complete...
qla2300 0000:02:02.1: Cable is unplugged...
scsi4 : qla2xxx
kernel unaligned access to 0xe0000030066d000c, ip=0xa0000001005cd0b1

0xa0000001005cd0b1 is qla2x00_init_host_attr+0x71.

void
qla2x00_init_host_attr(scsi_qla_host_t *ha)
{
        fc_host_node_name(ha->host) =
            be64_to_cpu(*(uint64_t *)ha->init_cb->node_name);
        fc_host_port_name(ha->host) =
            be64_to_cpu(*(uint64_t *)ha->init_cb->port_name);
}

It looks like ha->init_cb->port_name.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux