Am Dienstag, 16. August 2005 00:31 schrieb Bjorn Helgaas:
> These patches seem unrelated except that they both contain the
> text "via", so I think you should at least split them.
Will do.
> This quirk_via_irq() change seems like an awful lot of work to
> get rid of a few log messages. In my opinion, it's just not
> worth it, because it's so hard to debug problems in that area
> already.
What about the following version?
quirk_via_686irq() only works on pci_devs that are part of the 686.
Sooner or later there'll be more VIA southbridge types, which will
not need quirk_via_irq() like the 8237.
------
/*
* Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
* devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
* when written, it makes an internal connection to the PIC.
* For these devices, this register is defined to be 4 bits wide.
* Normally this is fine. However for IO-APIC motherboards, or
* non-x86 architectures (yes Via exists on PPC among other places),
* we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
* interrupts delivered properly.
*/
static void quirk_via_686irq(struct pci_dev *dev)
{
u8 irq, new_irq;
/*
* The ISA bridge is used to identify the 686.
* It shares it's PCI slot and bus with the device under test
* and is assigned to function 0.
*/
unsigned int isa_bridge_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
struct pci_dev * isa_bridge = pci_find_slot(dev->bus->number, isa_bridge_devfn);
if (isa_bridge == NULL || isa_bridge->vendor != PCI_VENDOR_ID_VIA ||
isa_bridge->device != PCI_DEVICE_ID_VIA_82C686)
return; /* We are not on a 686. Lets leave */
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_686irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_686irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_686irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_686irq);
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_6, quirk_via_686irq);
------
We could also add a "pci_dev * housed_in;" to "struct pci_dev"
to get rid of search done above under pci_find_slot().
To fill in "pci_dev * housed_in;", we'd need another quirk though.
Side note 1: IIRC via82xxx IDE code could also make use of such a "pci_dev * housed_in;"
Side note 2: The members
./include/linux/pci.h:542: unsigned short vendor_compatible[DEVICE_COUNT_COMPATIBLE];
./include/linux/pci.h:543: unsigned short device_compatible[DEVICE_COUNT_COMPATIBLE];
of "struct pci_dev" are unused in the current kernel and can vanish.
So a new "pci_dev * housed_in;" in "struct pci_dev" wouldn't add code in the sum.
Karsten
___________________________________________________________
Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |