Re: IT8212/ITE RAID

[Daniel Drake <dsd@gentoo.org>]

CaT wrote:
> > > 1. Alan Cox's IDE driver that was included in his ac patchset, which
> > >  seems to have died at 2.6.11ac7.
> >
> > Alan's driver has been merged into 2.6.13. You can get the up-to-date 
>
>
> Wooooooooooooooooooooooooooo!
>
>
> > patches here:
> >
> > http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/2315_ide-no-lba.patch
> > http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/4345_it8212.patch
>
>
> Didn't use these patches. Just went to 13-rc6 for now to test. All works
> as before with the following errors on bootup:

Alan Cox might be interested in these, adding to CC.

> [227523.229512] hda: max request size: 128KiB
> [227523.229557] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG
> [227523.229631] hda: cache flushes not supported
> [227523.229932]  hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
> [227523.230905] hda: recal_intr: error=0x04 { DriveStatusError }
> [227523.230952] ide: failed opcode was: unknown
> [227524.379085]  hda1
> [227524.379710] hdc: max request size: 128KiB
> [227524.379752] hdc: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, BUG
> [227524.379825] hdc: cache flushes not supported
> [227524.379991]  hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error }
> [227524.380702] hdc: recal_intr: error=0x04 { DriveStatusError }
> [227524.380748] ide: failed opcode was: unknown
> [227525.536757]  hdc1 hdc2
>
>
> /dev/hda:
>
>  Model=ST3200822A, FwRev=3.01, SerialNo=3LJ22Y8F
>  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
>  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
>  BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
>  CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
>  IORDY=on/off
>  PIO modes:  pio0 pio1 pio2 
>  DMA modes:  mdma0 mdma1 mdma2 
>  AdvancedPM=no
>  Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: 
>
>  * signifies the current active mode
>
>
> /dev/hdc:
>
>  Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH
>  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
>  RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
>  BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
>  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200
>  IORDY=on/off
>  PIO modes:  pio0 pio1 pio2 
>  DMA modes:  mdma0 mdma1 mdma2 
>  AdvancedPM=no
>  Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: 
>
>  * signifies the current active mode

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/