On Tue, 2005-08-09 at 17:19 +1000, Daniel Pittman wrote:
> I recently installed a SCSI tape drive and Adaptec AHA-2940U2W SCSI
> controller into my server to run backups.
>
> Since then, the driver issues these warnings on a semi-regular basis
> while the drive is busy:
>
> Aug 9 17:00:26 anu kernel: scsi0: Data Parity Error Detected during address or write data phase
> Aug 9 17:00:26 anu kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Make sure the hardware is all installed correctly. Check that the card
is fully seated, or try it in another PCI slot. Also check your cabling
and termination.
Lee
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |