* Zachary Amsden ([email protected]) wrote:
> These changes allow a sub-architecture to change the notion of privilege
> by running the kernel at CPL 0, 1, or 2. The make_kernel_segment() macro
> can be redefined by a subarchitecture to change the RPL on kernel segments
> to the appropriate value, and the tests user_mode() and user_mode_vm()
> may be similarly overridden.
No issue here, but there's some overlap from my side that needs merging
(note, as with all the others, mine are against 2.6.12, to user_mode(),
for example, has changed since then). Also note, the segment bit is
still much too heavy handed on my side (looks like you are generally
further along than I am ;-) so I still have some refactoring to do.
--- linux-2.6.12-xen0-arch.orig/include/asm-i386/ptrace.h
+++ linux-2.6.12-xen0-arch/include/asm-i386/ptrace.h
@@ -55,9 +55,9 @@ struct pt_regs {
#define PTRACE_SET_THREAD_AREA 26
#ifdef __KERNEL__
+#include <mach_ptrace.h>
struct task_struct;
extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code);
-#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs))
#define instruction_pointer(regs) ((regs)->eip)
#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
extern unsigned long profile_pc(struct pt_regs *regs);
--- /dev/null
+++ linux-2.6.12-xen0-arch/include/asm-i386/mach-default/mach_ptrace.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_PTRACE_H
+#define __ASM_MACH_PTRACE_H
+
+#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs))
+
+#endif
--- linux-2.6.12-xen0-arch.orig/include/asm-i386/segment.h
+++ linux-2.6.12-xen0-arch/include/asm-i386/segment.h
@@ -1,101 +1,6 @@
#ifndef _ASM_SEGMENT_H
#define _ASM_SEGMENT_H
-/*
- * The layout of the per-CPU GDT under Linux:
- *
- * 0 - null
- * 1 - reserved
- * 2 - reserved
- * 3 - reserved
- *
- * 4 - unused <==== new cacheline
- * 5 - unused
- *
- * ------- start of TLS (Thread-Local Storage) segments:
- *
- * 6 - TLS segment #1 [ glibc's TLS segment ]
- * 7 - TLS segment #2 [ Wine's %fs Win32 segment ]
- * 8 - TLS segment #3
- * 9 - reserved
- * 10 - reserved
- * 11 - reserved
- *
- * ------- start of kernel segments:
- *
- * 12 - kernel code segment <==== new cacheline
- * 13 - kernel data segment
- * 14 - default user CS
- * 15 - default user DS
- * 16 - TSS
- * 17 - LDT
- * 18 - PNPBIOS support (16->32 gate)
- * 19 - PNPBIOS support
- * 20 - PNPBIOS support
- * 21 - PNPBIOS support
- * 22 - PNPBIOS support
- * 23 - APM BIOS support
- * 24 - APM BIOS support
- * 25 - APM BIOS support
- *
- * 26 - ESPFIX small SS
- * 27 - unused
- * 28 - unused
- * 29 - unused
- * 30 - unused
- * 31 - TSS for double fault handler
- */
-#define GDT_ENTRY_TLS_ENTRIES 3
-#define GDT_ENTRY_TLS_MIN 6
-#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
-
-#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
-
-#define GDT_ENTRY_DEFAULT_USER_CS 14
-#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3)
-
-#define GDT_ENTRY_DEFAULT_USER_DS 15
-#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3)
-
-#define GDT_ENTRY_KERNEL_BASE 12
-
-#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0)
-#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
-
-#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1)
-#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
-
-#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4)
-#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5)
-
-#define GDT_ENTRY_PNPBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 6)
-#define GDT_ENTRY_APMBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 11)
-
-#define GDT_ENTRY_ESPFIX_SS (GDT_ENTRY_KERNEL_BASE + 14)
-#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
-
-#define GDT_ENTRY_DOUBLEFAULT_TSS 31
-
-/*
- * The GDT has 32 entries
- */
-#define GDT_ENTRIES 32
-
-#define GDT_SIZE (GDT_ENTRIES * 8)
-
-/* Simple and small GDT entries for booting only */
-
-#define GDT_ENTRY_BOOT_CS 2
-#define __BOOT_CS (GDT_ENTRY_BOOT_CS * 8)
-
-#define GDT_ENTRY_BOOT_DS (GDT_ENTRY_BOOT_CS + 1)
-#define __BOOT_DS (GDT_ENTRY_BOOT_DS * 8)
-
-/*
- * The interrupt descriptor table has room for 256 idt's,
- * the global descriptor table is dependent on the number
- * of tasks we can have..
- */
-#define IDT_ENTRIES 256
+#include <mach_segment.h>
#endif
--- /dev/null
+++ linux-2.6.12-xen0-arch/include/asm-i386/mach-default/mach_segment.h
@@ -0,0 +1,101 @@
+#ifndef _ASM_MACH_SEGMENT_H
+#define _ASM_MACH_SEGMENT_H
+
+/*
+ * The layout of the per-CPU GDT under Linux:
+ *
+ * 0 - null
+ * 1 - reserved
+ * 2 - reserved
+ * 3 - reserved
+ *
+ * 4 - unused <==== new cacheline
+ * 5 - unused
+ *
+ * ------- start of TLS (Thread-Local Storage) segments:
+ *
+ * 6 - TLS segment #1 [ glibc's TLS segment ]
+ * 7 - TLS segment #2 [ Wine's %fs Win32 segment ]
+ * 8 - TLS segment #3
+ * 9 - reserved
+ * 10 - reserved
+ * 11 - reserved
+ *
+ * ------- start of kernel segments:
+ *
+ * 12 - kernel code segment <==== new cacheline
+ * 13 - kernel data segment
+ * 14 - default user CS
+ * 15 - default user DS
+ * 16 - TSS
+ * 17 - LDT
+ * 18 - PNPBIOS support (16->32 gate)
+ * 19 - PNPBIOS support
+ * 20 - PNPBIOS support
+ * 21 - PNPBIOS support
+ * 22 - PNPBIOS support
+ * 23 - APM BIOS support
+ * 24 - APM BIOS support
+ * 25 - APM BIOS support
+ *
+ * 26 - ESPFIX small SS
+ * 27 - unused
+ * 28 - unused
+ * 29 - unused
+ * 30 - unused
+ * 31 - TSS for double fault handler
+ */
+#define GDT_ENTRY_TLS_ENTRIES 3
+#define GDT_ENTRY_TLS_MIN 6
+#define GDT_ENTRY_TLS_MAX (GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+#define GDT_ENTRY_DEFAULT_USER_CS 14
+#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS * 8 + 3)
+
+#define GDT_ENTRY_DEFAULT_USER_DS 15
+#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS * 8 + 3)
+
+#define GDT_ENTRY_KERNEL_BASE 12
+
+#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0)
+#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
+
+#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1)
+#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
+
+#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4)
+#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5)
+
+#define GDT_ENTRY_PNPBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 6)
+#define GDT_ENTRY_APMBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 11)
+
+#define GDT_ENTRY_ESPFIX_SS (GDT_ENTRY_KERNEL_BASE + 14)
+#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
+
+#define GDT_ENTRY_DOUBLEFAULT_TSS 31
+
+/*
+ * The GDT has 32 entries
+ */
+#define GDT_ENTRIES 32
+
+#define GDT_SIZE (GDT_ENTRIES * 8)
+
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS 2
+#define __BOOT_CS (GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS (GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS (GDT_ENTRY_BOOT_DS * 8)
+
+/*
+ * The interrupt descriptor table has room for 256 idt's,
+ * the global descriptor table is dependent on the number
+ * of tasks we can have..
+ */
+#define IDT_ENTRIES 256
+
+#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |