An update on this issue: I realized a problem with my kernel configuration - i was missing sd_mod. This fixed the problem with the harddrive, but the usb stick still doesn't work. attached a new dmesg output of the mp3stick problem (only very little changes) greetings Martin Maurer On Friday, 5. August 2005 17:51, Martin Maurer wrote: > Hi everybody, > > For quite some time now I have got a problem mounting my usb-stick (MP3 > FUN256 from DNT) with linux. This stick worked back in the 2.4.x days, > though it needed one of the later versions (I switched to 2.6.x as soon > about when it was released, so I didnt test the newest versions.) > > Recently I bought an usb harddisk encasing and tried this one, but it > doesnt work either. Taking a look at dmesg I think the devices are not > correctly found by the kernel. (I attached the two dmesg outputs). > > As I dont know which part of the kernel causes this problem I did not so > far report a bug using bugzilla. (And as it may be my fault too). > > I currently use 2.6.13-rc5 + software-suspoend 2 patch 2.1.9.12 > (I tried 2.6.12-rc5, and some earlier versions too) > > Processor: AMD Athlon XP 1700+ > Distribution: Debian unstable (though not updated for about a month). > > Anyone knows help for this issues ? > (patches to try and verify happily accepted) > > greetings > Martin Maurer
hub 1-1:1.0: state 5 ports 4 chg 0000 evt 0010 hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s hub 1-1:1.0: debounce: port 4: total 100ms stable 100ms status 0x101 usb 1-1.4: new full speed USB device using ohci_hcd and address 18 usb 1-1.4: ep0 maxpacket = 32 usb 1-1.4: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.4: hotplug usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) usb 1-1.4:1.0: hotplug usb-storage 1-1.4:1.0: usb_probe_interface usb-storage 1-1.4:1.0: usb_probe_interface - got id usb-storage: USB Mass Storage device detected usb-storage: -- associate_dev usb-storage: Vendor: 0x0f19, Product: 0x0103, Revision: 0x0100 usb-storage: Interface Subclass: 0x06, Protocol: 0x50 usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 usb-storage: GetMaxLUN command result is -32, data is 85 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 usb-storage: usb_stor_clear_halt: result = 0 scsi10 : SCSI emulation for USB Mass Storage devices usb-storage: *** thread sleeping. hub 1-1:1.0: state 5 ports 4 chg 0000 evt 0010 usb-storage: device found at 18 usb-storage: waiting for device to settle before scanning usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 13/36 usb-storage: -- short transfer usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes ohci_hcd 0000:00:02.2: urb cf61ca60 path 1.4 ep2in 82160000 cc 8 --> status -75 usb-storage: Status code -75; transferred 13/13 usb-storage: -- babble usb-storage: Bulk status result = 3 usb-storage: -- transport indicates error, resetting hub 1-1:1.0: state 5 ports 4 chg 0000 evt 0010 usb 1-1.4: reset full speed USB device using ohci_hcd and address 18 hub 1-1:1.0: state 5 ports 4 chg 0000 evt 0010 usb 1-1.4: ep0 maxpacket = 32 usb-storage: usb_reset_device returns 0 usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: Bulk Command S 0x43425355 T 0x2 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 36/36 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000002 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000002 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0 usb-storage: Illegal Request: Invalid field in cdb usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (3:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (4:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (5:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (6:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (7:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: device scan complete
Attachment:
pgplbGKBHsbEW.pgp
Description: PGP signature
- References:
- Elitegroup K7S5A + usb_storage problem
- From: Martin Maurer <[email protected]>
- Elitegroup K7S5A + usb_storage problem
- Prev by Date: Re: [PATCH] new contact info
- Next by Date: Re: preempt with selinux NULL pointer dereference
- Previous by thread: Elitegroup K7S5A + usb_storage problem
- Next by thread: Fw: Re: Elitegroup K7S5A + usb_storage problem
- Index(es):
