To: [email protected]
[1.] One line summary of the problem:
make modules failed Segfault (program cpp0)
[2.] Full description of the problem/report:
gcc: Internal error: Segmentation fault (program cpp0)
Please submit a full bug report.
See <URL:http://bugzilla.redhat.com/bugzilla/> for instructions.
make[3]: *** [cycx_drv.o] Error 1
make[3]: Leaving directory `/usr/src/linux-2.4.31/drivers/net/wan'
make[2]: *** [_modsubdir_wan] Error 2
make[2]: Leaving directory `/usr/src/linux-2.4.31/drivers/net'
make[1]: *** [_modsubdir_net] Error 2
make[1]: Leaving directory `/usr/src/linux-2.4.31/drivers'
make: *** [_mod_drivers] Error 2
[root@wulff linux-2.4.31]# In file included from
/usr/src/linux-2.4.31/include/linux/vmalloc.h:5,
from /usr/src/linux-2.4.31/include/asm/io.h:47,
from cycx_drv.c:60:
/usr/src/linux-2.4.31/include/linux/mm.h:155: parse error at end of input
/usr/src/linux-2.4.31/include/linux/mm.h:155: warning: no semicolon at
end of struct or union
[3.] Keywords (i.e., modules, networking, kernel):
Modules
[4.] Kernel version (from /proc/version):
[gvtlinux@wulff linux-2.4.31]$ cat /proc/version
Linux version 2.4.20-28.7 ([email protected]) (gcc
version 2.96 20000731 (Red Hat Linux 7.3 2.96-126)) #1 Thu Dec 18
11:18:28 EST 2003
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible)
Presently running RedHat 7.3 with kernel-athlon-2.4.20-28.7 from rpm
cd /usr/src/linux-2.4.31 downloaded today at 6:45 PM MST 8/4/05
make mrproper
cp /boot/config-2.4.20-28.7 /usr/src/linux-2.4.31/.config
make oldconfig (Took all of the defaults no changes)
make xconfig
make dep
make bzImage
make modules
[7.] Environment
ASUS A7M-266, Athlon 1.4GHz, 512M, Nvidia Riva TNT/2, Link-Sys 10/100,
D-Link 1000 Marvell, Promise tx/100 IDE controller. RedHat 7.3 with as
updates as currently available from RedHat, Grrr!
[7.1.] Software (add the output of the ver_linux script here)
[gvtlinux@wulff linux-2.4.31]$ sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux wulff 2.4.20-28.7 #1 Thu Dec 18 11:18:28 EST 2003 i686 unknown
Gnu C 2.96
Gnu make 3.79.1
util-linux 2.11n
mount 2.11n
modutils 2.4.18
e2fsprogs 1.27
reiserfsprogs 3.x.0j
quota-tools 3.06.
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded sr_mod cmpci soundcore binfmt_misc autofs tulip
ipchains ide-scsi scsi_mod ide-cd cdrom usb-uhci usbcore ext3 jbd
[7.2.] Processor information (from /proc/cpuinfo):
[gvtlinux@wulff linux-2.4.31]$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1400.110
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov
pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
bogomips : 2791.83
[7.3.] Module information (from /proc/modules):
[gvtlinux@wulff linux-2.4.31]$ cat /proc/modules
sr_mod 16216 2 (autoclean)
cmpci 32468 0 (autoclean)
soundcore 6436 4 (autoclean) [cmpci]
binfmt_misc 7204 1
autofs 11780 0 (autoclean) (unused)
tulip 42272 1
ipchains 49484 10
ide-scsi 10816 1
scsi_mod 107212 2 [sr_mod ide-scsi]
ide-cd 32064 0
cdrom 31936 0 [sr_mod ide-cd]
usb-uhci 24356 0 (unused)
usbcore 73504 1 [usb-uhci]
ext3 65280 2
jbd 47468 2 [ext3]
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
[gvtlinux@wulff linux-2.4.31]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
8000-80ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
8000-80ff : tulip
8400-84ff : PCI device 1186:4c00 (D-Link System Inc)
8800-880f : Promise Technology, Inc. 20268
8800-8807 : ide2
8808-880f : ide3
9000-9003 : Promise Technology, Inc. 20268
9400-9407 : Promise Technology, Inc. 20268
9800-9803 : Promise Technology, Inc. 20268
a000-a007 : Promise Technology, Inc. 20268
a400-a4ff : C-Media Electronics Inc CM8738
a400-a4ff : cmpci
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d41f : VIA Technologies, Inc. USB
d400-d41f : usb-uhci
d800-d80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
e000-e003 : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller
e300-e37f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[gvtlinux@wulff linux-2.4.31]$ cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0330-0331 : cmpci Midi
0376-0376 : ide1
0388-038b : cmpci FM
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
8000-80ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100
8000-80ff : tulip
8400-84ff : PCI device 1186:4c00 (D-Link System Inc)
8800-880f : Promise Technology, Inc. 20268
8800-8807 : ide2
8808-880f : ide3
9000-9003 : Promise Technology, Inc. 20268
9400-9407 : Promise Technology, Inc. 20268
9800-9803 : Promise Technology, Inc. 20268
a000-a007 : Promise Technology, Inc. 20268
a400-a4ff : C-Media Electronics Inc CM8738
a400-a4ff : cmpci
d000-d01f : VIA Technologies, Inc. USB (#2)
d000-d01f : usb-uhci
d400-d41f : VIA Technologies, Inc. USB
d400-d41f : usb-uhci
d800-d80f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE
d800-d807 : ide0
d808-d80f : ide1
e000-e003 : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] System Controller
e300-e37f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[gvtlinux@wulff linux-2.4.31]$ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1ffebfff : System RAM
00100000-0022250a : Kernel code
0022250b-0031845f : Kernel data
1ffec000-1ffeefff : ACPI Tables
1ffef000-1fffefff : reserved
1ffff000-1fffffff : ACPI Non-volatile Storage
f0800000-f08003ff : Linksys Network Everywhere Fast Ethernet 10/100
model NC100
f0800000-f08003ff : tulip
f1000000-f1003fff : PCI device 1186:4c00 (D-Link System Inc)
f1800000-f1803fff : Promise Technology, Inc. 20268
f2000000-f3dfffff : PCI Bus #01
f2000000-f2ffffff : nVidia Corporation RIVA TNT2 Model 64
f3f00000-f77fffff : PCI Bus #01
f4000000-f5ffffff : nVidia Corporation RIVA TNT2 Model 64
f7800000-f7800fff : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller
f8000000-fbffffff : Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
[root@wulff linux-2.4.31]# /sbin/lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P]
System Controller (rev 13)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f7800000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at e000 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=15 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 [IGD4-1P] AGP
Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: f2000000-f3dfffff
Prefetchable memory behind bridge: f3f00000-f77fffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
Subsystem: Asustek Computer, Inc.: Unknown device 8040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master
IDE (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at d800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16) (prog-if 00
[UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.4 Non-VGA unclassified device: VIA Technologies, Inc. VT82C686
[Apollo Super ACPI] (rev 40)
Subsystem: Asustek Computer, Inc.: Unknown device 8040
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: Asustek Computer, Inc. CMI8738 6ch-MX
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Unknown mass storage controller: Promise Technology, Inc. 20268
(rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8800 [size=16]
Region 5: Memory at f1800000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at <unassigned> [disabled] [size=16K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: D-Link System Inc: Unknown device 4c00 (rev 11)
Subsystem: D-Link System Inc: Unknown device 4c00
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at 8400 [size=256]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=7 DScale=1 PME-
Capabilities: [50] Vital Product Data
00:0d.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet
10/100 model NC100 (rev 11)
Subsystem: Linksys: Unknown device 0574
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (63750ns min, 63750ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 8000 [size=256]
Region 1: Memory at f0800000 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:05.0 VGA compatible controller: nVidia Corporation RIVA TNT2 Model 64
(rev 15) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f4000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at f3ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.6.] SCSI information (from /proc/scsi/scsi)
[gvtlinux@wulff linux-2.4.31]$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Memorex Model: 52MAXX 2452AJ Rev: 6WS2
Type: CD-ROM ANSI SCSI revision: 02
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
kernel configuration file supplied upon request to [email protected]
[X.] Other notes, patches, fixes, workarounds:
I expect you to tell me to upgrade everything. Thanks for taking this
bug report.
Thanks
George Van Tuyl
[email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |