From: David Brownell <[email protected]>
This patch has a one line oops fix, plus related cleanups.
- The bugfix uses microframe scheduling data given to the hardware to
test "is this a periodic QH", rather than testing for nonzero period.
(Prevents an oops by providing the correct answer.)
- The cleanup going along with the patch should make it clearer what's
going on whenever those bitfields are accessed.
The bug came about when, around January, two new kinds of EHCI interrupt
scheduling operation were added, involving both the high speed (24 KBytes
per millisec) and low/full speed (1-64 bytes per millisec) microframe
scheduling. A driver for the Edirol UA-1000 Audio Capture Unit ran into
the oops; it used one of the newly supported high speed modes.
Signed-off-by: David Brownell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/ehci-dbg.c | 2 +-
drivers/usb/host/ehci-q.c | 5 +++--
drivers/usb/host/ehci-sched.c | 13 +++++++------
drivers/usb/host/ehci.h | 5 +++++
4 files changed, 16 insertions(+), 9 deletions(-)
--- gregkh-2.6.orig/drivers/usb/host/ehci-dbg.c 2005-08-04 17:37:11.000000000 -0700
+++ gregkh-2.6/drivers/usb/host/ehci-dbg.c 2005-08-04 17:40:08.000000000 -0700
@@ -527,7 +527,7 @@
p.qh->period,
le32_to_cpup (&p.qh->hw_info2)
/* uframe masks */
- & 0xffff,
+ & (QH_CMASK | QH_SMASK),
p.qh);
size -= temp;
next += temp;
--- gregkh-2.6.orig/drivers/usb/host/ehci.h 2005-08-04 17:37:11.000000000 -0700
+++ gregkh-2.6/drivers/usb/host/ehci.h 2005-08-04 17:40:08.000000000 -0700
@@ -385,6 +385,11 @@
__le32 hw_info1; /* see EHCI 3.6.2 */
#define QH_HEAD 0x00008000
__le32 hw_info2; /* see EHCI 3.6.2 */
+#define QH_SMASK 0x000000ff
+#define QH_CMASK 0x0000ff00
+#define QH_HUBADDR 0x007f0000
+#define QH_HUBPORT 0x3f800000
+#define QH_MULT 0xc0000000
__le32 hw_current; /* qtd list - see EHCI 3.6.4 */
/* qtd overlay (hardware parts of a struct ehci_qtd) */
--- gregkh-2.6.orig/drivers/usb/host/ehci-q.c 2005-08-04 17:37:11.000000000 -0700
+++ gregkh-2.6/drivers/usb/host/ehci-q.c 2005-08-04 17:40:08.000000000 -0700
@@ -222,7 +222,7 @@
struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv;
/* S-mask in a QH means it's an interrupt urb */
- if ((qh->hw_info2 & __constant_cpu_to_le32 (0x00ff)) != 0) {
+ if ((qh->hw_info2 & __constant_cpu_to_le32 (QH_SMASK)) != 0) {
/* ... update hc-wide periodic stats (for usbfs) */
ehci_to_hcd(ehci)->self.bandwidth_int_reqs--;
@@ -428,7 +428,8 @@
/* should be rare for periodic transfers,
* except maybe high bandwidth ...
*/
- if (qh->period) {
+ if ((__constant_cpu_to_le32 (QH_SMASK)
+ & qh->hw_info2) != 0) {
intr_deschedule (ehci, qh);
(void) qh_schedule (ehci, qh);
} else
--- gregkh-2.6.orig/drivers/usb/host/ehci-sched.c 2005-08-04 17:37:11.000000000 -0700
+++ gregkh-2.6/drivers/usb/host/ehci-sched.c 2005-08-04 17:40:08.000000000 -0700
@@ -301,7 +301,7 @@
dev_dbg (&qh->dev->dev,
"link qh%d-%04x/%p start %d [%d/%d us]\n",
- period, le32_to_cpup (&qh->hw_info2) & 0xffff,
+ period, le32_to_cpup (&qh->hw_info2) & (QH_CMASK | QH_SMASK),
qh, qh->start, qh->usecs, qh->c_usecs);
/* high bandwidth, or otherwise every microframe */
@@ -385,7 +385,8 @@
dev_dbg (&qh->dev->dev,
"unlink qh%d-%04x/%p start %d [%d/%d us]\n",
- qh->period, le32_to_cpup (&qh->hw_info2) & 0xffff,
+ qh->period,
+ le32_to_cpup (&qh->hw_info2) & (QH_CMASK | QH_SMASK),
qh, qh->start, qh->usecs, qh->c_usecs);
/* qh->qh_next still "live" to HC */
@@ -411,7 +412,7 @@
* active high speed queues may need bigger delays...
*/
if (list_empty (&qh->qtd_list)
- || (__constant_cpu_to_le32 (0x0ff << 8)
+ || (__constant_cpu_to_le32 (QH_CMASK)
& qh->hw_info2) != 0)
wait = 2;
else
@@ -533,7 +534,7 @@
/* reuse the previous schedule slots, if we can */
if (frame < qh->period) {
- uframe = ffs (le32_to_cpup (&qh->hw_info2) & 0x00ff);
+ uframe = ffs (le32_to_cpup (&qh->hw_info2) & QH_SMASK);
status = check_intr_schedule (ehci, frame, --uframe,
qh, &c_mask);
} else {
@@ -569,10 +570,10 @@
qh->start = frame;
/* reset S-frame and (maybe) C-frame masks */
- qh->hw_info2 &= __constant_cpu_to_le32 (~0xffff);
+ qh->hw_info2 &= __constant_cpu_to_le32(~(QH_CMASK | QH_SMASK));
qh->hw_info2 |= qh->period
? cpu_to_le32 (1 << uframe)
- : __constant_cpu_to_le32 (0xff);
+ : __constant_cpu_to_le32 (QH_SMASK);
qh->hw_info2 |= c_mask;
} else
ehci_dbg (ehci, "reused qh %p schedule\n", qh);
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |