RE: As of 2.6.13-rc1 Fusion-MPT very slow

[Holger Kiehl <Holger.Kiehl@dwd.de>]

No I did not get it. Can you please send it to me or tell me where I can
download it?

Thanks,
Holger
--

On Mon, 1 Aug 2005, Moore, Eric Dean wrote:

> I provided an application called getspeed as an attachment
> in the email I sent last Friday. Did you receive that, or do
> I need to resend?  If possible, can run that application
> and send me the output.
>
> Regards,
> Eric Moore
>
> On Monday, August 01, 2005 4:16 AM, Holger Kiehl wrote:
>
> > On Fri, 29 Jul 2005, Andrew Morton wrote:
> >
> > > "Moore, Eric Dean" <Eric.Moore@lsil.com> wrote:
> > > >  Regarding the 1st issue, can you try this patch out.  It
> > maybe in the
> > > >  -mm branch. Andrew cc'd on this email can confirm.
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/
> > 2.6.13-rc3/2.6
> > > >  .13-rc3-mm3/broken-out/mpt-fusion-dv-fixes.patch
> > >
> > > Yes, that's part of 2.6.13-rc3-mm3.
> > The patch makes no difference. Still get the following
> > results when fusion
> > is compiled in:
> >
> >        sdc   74MB/s
> >        sdd    2MB/s
> >        sde    2MB/s
> >        sdf    2MB/s
> >
> > On second channel:
> >
> >        sdg   74MB/s
> >        sdh   74MB/s
> >        sdi   74MB/s
> >        sdj   74MB/s
> >
> > The patch was applied to linux-2.6.13-rc4-git3.
> >
> > Here part of dmesg output:
> >
> >     Fusion MPT base driver 3.03.02
> >     Copyright (c) 1999-2005 LSI Logic Corporation
> >     Fusion MPT SPI Host driver 3.03.02
> >     ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 24 (level,
> > low) -> IRQ 217
> >     mptbase: Initiating ioc0 bringup
> >     ioc0: 53C1030: Capabilities={Initiator,Target}
> >     scsi4 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1,
> > MaxQ=255, IRQ=217
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdc: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdc: drive cache: write back
> >     SCSI device sdc: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdc: drive cache: write back
> >      sdc: sdc1
> >     Attached scsi disk sdc at scsi4, channel 0, id 0, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdd: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdd: drive cache: write back
> >     SCSI device sdd: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdd: drive cache: write back
> >      sdd: sdd1
> >     Attached scsi disk sdd at scsi4, channel 0, id 1, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sde: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sde: drive cache: write back
> >     SCSI device sde: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sde: drive cache: write back
> >      sde: sde1
> >     Attached scsi disk sde at scsi4, channel 0, id 2, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdf: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdf: drive cache: write back
> >     SCSI device sdf: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdf: drive cache: write back
> >      sdf: sdf1
> >     Attached scsi disk sdf at scsi4, channel 0, id 3, lun 0
> >     ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 25 (level,
> > low) -> IRQ 225
> >     mptbase: Initiating ioc1 bringup
> >     ioc1: 53C1030: Capabilities={Initiator,Target}
> >     scsi5 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1,
> > MaxQ=255, IRQ=225
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdg: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdg: drive cache: write back
> >     SCSI device sdg: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdg: drive cache: write back
> >      sdg: sdg1
> >     Attached scsi disk sdg at scsi5, channel 0, id 0, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdh: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdh: drive cache: write back
> >     SCSI device sdh: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdh: drive cache: write back
> >      sdh: sdh1
> >     Attached scsi disk sdh at scsi5, channel 0, id 1, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdi: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdi: drive cache: write back
> >     SCSI device sdi: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdi: drive cache: write back
> >      sdi: sdi1
> >     Attached scsi disk sdi at scsi5, channel 0, id 2, lun 0
> >       Vendor: FUJITSU   Model: MAS3735NP         Rev: 0104
> >       Type:   Direct-Access                      ANSI SCSI
> > revision: 03
> >     SCSI device sdj: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdj: drive cache: write back
> >     SCSI device sdj: 143552136 512-byte hdwr sectors (73499 MB)
> >     SCSI device sdj: drive cache: write back
> >      sdj: sdj1
> >     Attached scsi disk sdj at scsi5, channel 0, id 3, lun 0
> >
> > Anything else I can try or provide?
> >
> > Holger

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/