From: Ladislav Michl <[email protected]>
DS1339 manual, page 6, chapter Date and time operation:
The DS1339 can be run in either 12-hour or 24-hour mode. Bit 6 of the
hours register is defined as the 12-hour or 24-hour mode-select bit.
When high, the 12-hour mode is selected.
Patch below makes ds1337 driver work as documented in manual.
Signed-off-by: Ladislav Michl <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/chips/ds1337.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
--- gregkh-2.6.orig/drivers/i2c/chips/ds1337.c 2005-07-29 11:30:00.000000000 -0700
+++ gregkh-2.6/drivers/i2c/chips/ds1337.c 2005-07-29 11:34:02.000000000 -0700
@@ -165,7 +165,7 @@
buf[0] = 0; /* reg offset */
buf[1] = BIN2BCD(dt->tm_sec);
buf[2] = BIN2BCD(dt->tm_min);
- buf[3] = BIN2BCD(dt->tm_hour) | (1 << 6);
+ buf[3] = BIN2BCD(dt->tm_hour);
buf[4] = BIN2BCD(dt->tm_wday) + 1;
buf[5] = BIN2BCD(dt->tm_mday);
buf[6] = BIN2BCD(dt->tm_mon) + 1;
@@ -344,9 +344,9 @@
/* Ensure that device is set in 24-hour mode */
val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
- if ((val >= 0) && (val & (1 << 6)) == 0)
+ if ((val >= 0) && (val & (1 << 6)))
i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
- val | (1 << 6));
+ val & 0x3f);
}
static int ds1337_detach_client(struct i2c_client *client)
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |