This is the simple KGDB over Ethernet I/O driver that uses netpoll for all of
the heavy lifting. At one point this was very similar to the version Matt
Mackall wrote and is currently in Andrew's tree. Since then it has been
reworked to fit into our model.
---
Makefile | 0
linux-2.6.13-rc3-trini/drivers/net/Makefile | 1
linux-2.6.13-rc3-trini/drivers/net/kgdboe.c | 208 ++++++++++++++++++++++++++++
linux-2.6.13-rc3-trini/lib/Kconfig.debug | 24 +++
4 files changed, 233 insertions(+)
diff -puN /dev/null drivers/net/kgdboe.c
--- /dev/null 2005-07-25 10:57:32.312383000 -0700
+++ linux-2.6.13-rc3-trini/drivers/net/kgdboe.c 2005-07-29 12:49:22.000000000 -0700
@@ -0,0 +1,208 @@
+/*
+ * drivers/net/kgdboe.c
+ *
+ * A network interface for GDB.
+ * Based upon 'gdbserial' by David Grothe <[email protected]>
+ * and Scott Foehner <[email protected]>
+ *
+ * Maintainers: Amit S. Kale <[email protected]> and
+ * Tom Rini <[email protected]>
+ *
+ * 2004 (c) Amit S. Kale <[email protected]>
+ * 2004-2005 (c) MontaVista Software, Inc.
+ * 2005 (c) Wind River Systems, Inc.
+ *
+ * Other folks:
+ * San Mehat <[email protected]>
+ * Robert Walsh <[email protected]>
+ * wangdi <[email protected]>.
+ * Matt Mackall <[email protected]>
+ * Pavel Machek <[email protected]>
+ * Jason Wessel <[email protected]>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ * Changes:
+ * 3/10/05 - Jason Wessel <[email protected]>
+ * - Added ability to compile/load as module
+ *
+ * Known problems:
+ * - There is no way to deny the unloading of the module
+ * if KGDB is connected, but an attempt is made to handle it
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/kgdb.h>
+#include <linux/netpoll.h>
+#include <linux/init.h>
+
+#include <asm/atomic.h>
+
+#define IN_BUF_SIZE 512 /* power of 2, please */
+#define OUT_BUF_SIZE 30 /* We don't want to send too big of a packet. */
+
+static char in_buf[IN_BUF_SIZE], out_buf[OUT_BUF_SIZE];
+static int in_head, in_tail, out_count;
+static atomic_t in_count;
+/* 0 = unconfigured, 1 = netpoll options parsed, 2 = fully configured. */
+static int configured;
+
+static void rx_hook(struct netpoll *np, int port, char *msg, int len);
+static void eth_pre_exception_handler(void);
+static void eth_post_exception_handler(void);
+static int eth_get_char(void);
+static void eth_flush_buf(void);
+static void eth_put_char(int chr);
+int init_kgdboe(void);
+
+static struct netpoll np = {
+ .name = "kgdboe",
+ .dev_name = "eth0",
+ .rx_hook = rx_hook,
+ .local_port = 6443,
+ .remote_port = 6442,
+ .remote_mac = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
+};
+
+MODULE_DESCRIPTION("KGDB driver for network interfaces");
+MODULE_LICENSE("GPL");
+static char config[256];
+module_param_string(kgdboe, config, 256, 0);
+MODULE_PARM_DESC(kgdboe, " kgdboe=[src-port]@[src-ip]/[dev],"
+ "[tgt-port]@<tgt-ip>/<tgt-macaddr>\n");
+
+static struct kgdb_io local_kgdb_io_ops = {
+ .read_char = eth_get_char,
+ .write_char = eth_put_char,
+ .init = init_kgdboe,
+ .flush = eth_flush_buf,
+ .pre_exception = eth_pre_exception_handler,
+ .post_exception = eth_post_exception_handler
+};
+
+static void eth_pre_exception_handler(void)
+{
+ netpoll_set_trap(1);
+}
+
+static void eth_post_exception_handler(void)
+{
+ netpoll_set_trap(0);
+}
+
+static int eth_get_char(void)
+{
+ int chr;
+
+ while (atomic_read(&in_count) == 0)
+ netpoll_poll(&np);
+
+ chr = in_buf[in_tail++];
+ in_tail &= (IN_BUF_SIZE - 1);
+ atomic_dec(&in_count);
+ return chr;
+}
+
+static void eth_flush_buf(void)
+{
+ if (out_count && np.dev) {
+ netpoll_send_udp(&np, out_buf, out_count);
+ memset(out_buf, 0, sizeof(out_buf));
+ out_count = 0;
+ }
+}
+
+static void eth_put_char(int chr)
+{
+ out_buf[out_count++] = chr;
+ if (out_count == OUT_BUF_SIZE)
+ eth_flush_buf();
+}
+
+static void rx_hook(struct netpoll *np, int port, char *msg, int len)
+{
+ int i;
+
+ np->remote_port = port;
+
+ /*
+ * This could be GDB trying to attach. But it could also be GDB
+ * finishing up a session, with kgdb_connected=0 but GDB sending
+ * an ACK for the final packet. To make sure we don't try and
+ * make a breakpoint when GDB is leaving, make sure that if
+ * !kgdb_connected the only len == 1 packet we allow is ^C.
+ */
+ if (!kgdb_connected && (len != 1 || msg[0] == 3) &&
+ !atomic_read(&kgdb_setting_breakpoint))
+ tasklet_schedule(&kgdb_tasklet_breakpoint);
+
+ for (i = 0; i < len; i++) {
+ if (msg[i] == 3)
+ tasklet_schedule(&kgdb_tasklet_breakpoint);
+
+ if (atomic_read(&in_count) >= IN_BUF_SIZE) {
+ /* buffer overflow, clear it */
+ in_head = in_tail = 0;
+ atomic_set(&in_count, 0);
+ break;
+ }
+ in_buf[in_head++] = msg[i];
+ in_head &= (IN_BUF_SIZE - 1);
+ atomic_inc(&in_count);
+ }
+}
+
+static int option_setup(char *opt)
+{
+ configured = !netpoll_parse_options(&np, opt);
+ return 0;
+}
+
+__setup("kgdboe=", option_setup);
+
+int init_kgdboe(void)
+{
+ /* Already done? */
+ if (configured == 2)
+ return 0;
+
+ if (strlen(config))
+ option_setup(config);
+
+ if (!configured) {
+ printk("kgdboe: configuration incorrect - kgdboe not "
+ "loaded.\n");
+ printk(" Usage: kgdboe=[src-port]@[src-ip]/[dev],[tgt-port]"
+ "@<tgt-ip>/[tgt-macaddr]\n");
+ return -EINVAL;
+ }
+
+ if (netpoll_setup(&np)) {
+ printk("kgdboe: netpoll_setup failed kgdboe failed\n");
+ return -EINVAL;
+ }
+
+ if (kgdb_register_io_module(&local_kgdb_io_ops))
+ return -EINVAL;
+
+ printk(KERN_INFO "kgdboe: debugging over ethernet enabled\n");
+
+ configured = 2;
+
+ return 0;
+}
+
+static void cleanup_kgdboe(void)
+{
+ netpoll_cleanup(&np);
+ configured = 0;
+
+ kgdb_unregister_io_module(&local_kgdb_io_ops);
+}
+
+module_init(init_kgdboe);
+module_exit(cleanup_kgdboe);
diff -puN drivers/net/Makefile~eth drivers/net/Makefile
--- linux-2.6.13-rc3/drivers/net/Makefile~eth 2005-07-29 12:49:22.000000000 -0700
+++ linux-2.6.13-rc3-trini/drivers/net/Makefile 2005-07-29 12:49:22.000000000 -0700
@@ -195,3 +195,4 @@ obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_KGDBOE) += kgdboe.o
diff -puN lib/Kconfig.debug~eth lib/Kconfig.debug
--- linux-2.6.13-rc3/lib/Kconfig.debug~eth 2005-07-29 12:49:22.000000000 -0700
+++ linux-2.6.13-rc3-trini/lib/Kconfig.debug 2005-07-29 12:49:22.000000000 -0700
@@ -217,6 +217,18 @@ config KGDB_8250_NOMODULE
GDB. This is independent of the normal (SERIAL_8250) driver
for this chipset.
+config KGDBOE_NOMODULE
+ bool "KGDB: On ethernet - in kernel"
+ select KGDBOE
+ select NETPOLL
+ select NETPOLL_TRAP
+ select NETPOLL_RX
+ help
+ Uses the NETPOLL API to communicate with the host GDB via UDP.
+ In order for this to work, the ethernet interface specified must
+ support the NETPOLL API, and this must be initialized at boot.
+ See the documentation for syntax.
+
config KGDB_MPSC
bool "KGDB on MV64x60 MPSC"
depends on SERIAL_MPSC
@@ -247,6 +259,18 @@ config KGDB_SH_SCI
endchoice
+config KGDBOE
+ tristate "KGDB: On ethernet" if !KGDBOE_NOMODULE
+ depends on m && KGDB_ONLY_MODULES
+ select NETPOLL
+ select NETPOLL_TRAP
+ select NETPOLL_RX
+ help
+ Uses the NETPOLL API to communicate with the host GDB via UDP.
+ In order for this to work, the ethernet interface specified must
+ support the NETPOLL API, and this must be initialized at boot.
+ See the documentation for syntax.
+
config KGDB_8250
tristate "KGDB: On generic serial port (8250)" if !KGDB_8250_NOMODULE
depends on m && KGDB_ONLY_MODULES
diff -puN Makefile~eth Makefile
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |