Hi, subject says it all. On my machin if above option is enabled in the kernel, I can no longer poweroff my machine - well, I can still do it by using magioc sysrq + o, but the poweroff script won't do so. Taking out above option fixes it. Rebooting the machine works though. Attached are .config and dmesg of currently used slightly patched kernel (which does power off with above option disabled), but tests were done with non-tainted vanilla kernels. IIRC 2.6.13-rc1 still powered of w/ usb supend option, I haven't tested rc2, though. Cheers, Prakash Linux version 2.6.13-rc4 (root@tachyon) (gcc-Version 3.4.4 (Gentoo 3.4.4, pie-8.7.8)) #10 Fri Jul 29 11:43:53 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6b00 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff79c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/md1 tsc quiet elevator=cfq hdb=none sdb=none idle=halt acpi_skip_timer_override cpufreq_nforce2.min_fsb=125 psmouse.rate=200 report_lost_ticks ide_setup: hdb=none using halt in idle threads. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2185.837 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 904008k/917504k available (3371k kernel code, 13044k reserved, 1205k data, 188k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4374.50 BogoMIPS (lpj=2187252) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: AMD Athlon(tm) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=0 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: nForce2 C1 Halt Disconnect fixup Boot video device is 0000:02:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:08.0 IO window: 9000-afff MEM window: da000000-dbffffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: d8000000-d9ffffff PREFETCH window: d0000000-d7ffffff PCI: Setting latency timer of device 0000:00:08.0 to 64 pnp: 00:00: ioport range 0x4000-0x407f could not be reserved pnp: 00:00: ioport range 0x4080-0x40ff has been reserved pnp: 00:00: ioport range 0x4400-0x447f has been reserved pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved pnp: 00:00: ioport range 0x4200-0x427f has been reserved pnp: 00:00: ioport range 0x4280-0x42ff has been reserved pnp: 00:01: ioport range 0x5000-0x503f has been reserved pnp: 00:01: ioport range 0x5100-0x513f has been reserved Machine check exception polling timer started. cpufreq: Detected nForce2 chipset revision C1 cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss. cpufreq: FSB currently at 198 MHz, FID 11.0 IA-32 Microcode Update Driver: v1.14 <[email protected]> Installing knfsd (copyright (C) 1996 [email protected]). NTFS driver 2.1.23 [Flags: R/O]. SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Fan [FAN] (on) ACPI: Thermal Zone [THRM] (48 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] lp0: using parport0 (interrupt-driven). lp0: console ready io scheduler noop registered io scheduler cfq registered (default) Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35. ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 eth0: forcedeth.c: subsystem: 0147b:1c00 bound to 0000:00:04.0 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[email protected]> b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully flexcop-pci: will use the HW PID filter. flexcop-pci: card revision 1 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 17 DVB: registering new adapter (FlexCop Digital TV device). b2c2-flexcop: MAC address = 00:d0:d7:03:02:73 b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed mt352_read_register: readreg error (reg=127, ret==-121) b2c2-flexcop: i2c master_xfer failed i2c_readbytes: i2c read error (addr 0a, err == -121) b2c2-flexcop: i2c master_xfer failed b2c2-flexcop: i2c master_xfer failed stv0297_readreg: readreg error (reg == 0x80, ret == -22) b2c2-flexcop: found the vp310 (aka mt312) at i2c address: 0x0e DVB: registering frontend 0 (Zarlink VP310 DVB-S)... b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S (old version)' at the 'PCI' bus controlled by a 'FlexCopII' complete Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SP1614N, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: NU DVDRW DDW-081, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 98304kB, 32/64/96 CHS, 4096 kBps, 512 sector size, 2941 rpm libata version 1.11 loaded. sata_sil version 0.9 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 18 ata1: SATA max UDMA/100 cmd 0xF8806080 ctl 0xF880608A bmdma 0xF8806000 irq 18 ata2: SATA max UDMA/100 cmd 0xF88060C0 ctl 0xF88060CA bmdma 0xF8806008 irq 18 ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff ata1: dev 0 ATA, max UDMA7, 156368016 sectors: lba48 ata1: dev 0 configured for UDMA/100 scsi0 : sata_sil ata2: no device found (phy stat 00000000) scsi1 : sata_sil Vendor: ATA Model: SAMSUNG SP0812C Rev: SU10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) SCSI device sda: drive cache: write back SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 ohci1394: $Rev: 1299 $ Ben Collins <[email protected]> ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APCM] -> GSI 21 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dc084000-dc0847ff] Max Packet=[2048] video1394: Installed video1394 module ieee1394: raw1394: /dev/raw1394 device initialized sbp2: $Rev: 1306 $ Ben Collins <[email protected]> usbmon: debugs is not available ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller ehci_hcd 0000:00:02.2: debug port 1 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: irq 20, io mem 0xdc086000 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: park 0 ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 16, io mem 0xdc080000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2) ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 19, io mem 0xdc083000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usb 3-2: new full speed USB device using ohci_hcd and address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004 usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice I2O subsystem v1.288 i2o: max drivers = 8 I2O Configuration OSM v1.248 I2O ProcFS OSM v1.145 i2c /dev entries driver i2c_adapter i2c-2: nForce2 SMBus adapter at 0x5000 i2c_adapter i2c-3: nForce2 SMBus adapter at 0x5100 input: AT Translated Set 2 keyboard on isa0060/serio0 atxp1 2-004e: Using VRM: 9.0 md: raid0 personality registered as nr 2 md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode md: Autodetecting RAID arrays. input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 md: autorun ... md: considering sda3 ... md: adding sda3 ... md: sda2 has different UUID to sda3 md: adding hda7 ... md: hda6 has different UUID to sda3 md: created md1 md: bind<hda7> md: bind<sda3> md: running: <sda3><hda7> md1: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sda3 raid0: comparing sda3(44748992) with sda3(44748992) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hda7 raid0: comparing hda7(44748928) with sda3(44748992) raid0: NOT EQUAL raid0: comparing hda7(44748928) with hda7(44748928) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking hda7 ... nope. raid0: checking sda3 ... contained as device 0 (44748992) is smallest!. raid0: zone->nb_dev: 1, size: 64 raid0: current zone offset: 44748992 raid0: done. raid0 : md_size is 89497920 blocks. raid0 : conf->hash_spacing is 89497856 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: considering sda2 ... md: adding sda2 ... md: adding hda6 ... md: created md0 md: bind<hda6> md: bind<sda2> md: running: <sda2><hda6> md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sda2 raid0: comparing sda2(2449792) with sda2(2449792) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hda6 raid0: comparing hda6(2449792) with sda2(2449792) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 4899584 blocks. raid0 : conf->hash_spacing is 4899584 blocks. raid0 : nb_zone is 1. raid0 : Allocating 4 bytes for hash. md: ... autorun DONE. UDF-fs: No VRS found XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 188k freed ohci1394: fw-host0: SelfID received outside of bus reset sequence ieee1394: Host added: ID:BUS[0-00:1023] GUID[000000508df0fbe3] nvsound: module license 'unspecified' taints kernel. Nvsound: Nvidia Audio Init Module, 11:46:53 Jul 29 2005 version 1.0-2 ACPI: PCI Interrupt Link [APCI] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCI] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device 0000:00:05.0 to 64 Nvsound: NVIDIA nForce2 Controller Mem 0xdc000000 and IRQ 14 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22 (level, high) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 Nvsound: NVIDIA nForce2 Audio aci 0xb800 and ac97 0xb400, IRQ 10 Nvsound: DEV MIXER 0 DEV AUDIO 3 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 21 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul 27 07:55:38 PDT 2004 NTFS volume version 3.1. NTFS volume version 3.1. NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 Adding 738948k swap on /dev/hda5. Priority:1 extents:1 Adding 738948k swap on /dev/sda1. Priority:1 extents:1 # # Automatically generated make config: don't edit # Linux kernel version: 2.6.13-rc4 # Fri Jul 29 11:49:53 2005 # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_HOTPLUG=y CONFIG_KOBJECT_UEVENT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_JUMPS=0 # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_HPET_TIMER is not set # CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_1GLOWMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_REGPARM=y CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_PHYSICAL_START=0x100000 # CONFIG_KEXEC is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y # CONFIG_ACPI_SLEEP is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_HOTKEY=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # CONFIG_ACPI_CONTAINER is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set # # CPUFreq processor drivers # # CONFIG_X86_ACPI_CPUFREQ is not set # CONFIG_X86_POWERNOW_K6 is not set # CONFIG_X86_POWERNOW_K7 is not set # CONFIG_X86_POWERNOW_K8 is not set # CONFIG_X86_GX_SUSPMOD is not set # CONFIG_X86_SPEEDSTEP_CENTRINO is not set # CONFIG_X86_SPEEDSTEP_ICH is not set # CONFIG_X86_SPEEDSTEP_SMI is not set # CONFIG_X86_P4_CLOCKMOD is not set CONFIG_X86_CPUFREQ_NFORCE2=y # CONFIG_X86_LONGRUN is not set # CONFIG_X86_LONGHAUL is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set CONFIG_PCI_GODIRECT=y # CONFIG_PCI_GOANY is not set CONFIG_PCI_DIRECT=y # CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_ACPI is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set CONFIG_IP_TCPDIAG=y # CONFIG_IP_TCPDIAG_IPV6 is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # # Device Drivers # # # Generic Driver Options # # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPBIOS=y CONFIG_PNPBIOS_PROC_FS=y CONFIG_PNPACPI=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_LBD=y # CONFIG_CDROM_PKTCDVD is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set CONFIG_SCSI_SATA=y # CONFIG_SCSI_SATA_AHCI is not set # CONFIG_SCSI_SATA_SVW is not set # CONFIG_SCSI_ATA_PIIX is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=y # CONFIG_SCSI_SATA_SIS is not set # CONFIG_SCSI_SATA_ULI is not set # CONFIG_SCSI_SATA_VIA is not set # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA24XX is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=y # CONFIG_MD_LINEAR is not set CONFIG_MD_RAID0=y # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=y # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set # CONFIG_IEEE1394_EXPORT_FULL_API is not set # # Device Drivers # # CONFIG_IEEE1394_PCILYNX is not set CONFIG_IEEE1394_OHCI1394=y # # Protocol Drivers # CONFIG_IEEE1394_VIDEO1394=y CONFIG_IEEE1394_SBP2=y # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=y CONFIG_IEEE1394_RAWIO=y # CONFIG_IEEE1394_CMP is not set # # I2O device support # CONFIG_I2O=y CONFIG_I2O_EXT_ADAPTEC=y CONFIG_I2O_CONFIG=y CONFIG_I2O_CONFIG_OLD_IOCTL=y # CONFIG_I2O_BUS is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_SCSI is not set CONFIG_I2O_PROC=y # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=y # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set CONFIG_FORCEDETH=y # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem # CONFIG_ISDN=m # # Old ISDN4Linux # # CONFIG_ISDN_I4L is not set # # CAPI subsystem # CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m # # CAPI hardware drivers # # # Active AVM cards # # CONFIG_CAPI_AVM is not set # # Active Eicon DIVA Server cards # # CONFIG_CAPI_EICON is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set CONFIG_JOYSTICK_TURBOGRAFX=m # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y CONFIG_LP_CONSOLE=y # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set # # TPM devices # # CONFIG_TCG_TPM is not set # # I2C support # CONFIG_I2C=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=y # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_ELEKTOR is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_ISA=y CONFIG_I2C_NFORCE2=y # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ASB100 is not set CONFIG_SENSORS_ATXP1=y # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_FSCPOS is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set CONFIG_SENSORS_W83627HF=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # CONFIG_DVB=y CONFIG_DVB_CORE=y # # Supported SAA7146 based PCI Adapters # # CONFIG_DVB_AV7110 is not set # CONFIG_DVB_BUDGET is not set # CONFIG_DVB_BUDGET_CI is not set # CONFIG_DVB_BUDGET_AV is not set # # Supported USB Adapters # # CONFIG_DVB_USB is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_DVB_CINERGYT2 is not set # # Supported FlexCopII (B2C2) Adapters # CONFIG_DVB_B2C2_FLEXCOP=y CONFIG_DVB_B2C2_FLEXCOP_PCI=y # CONFIG_DVB_B2C2_FLEXCOP_USB is not set # CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set # # Supported BT878 Adapters # # # Supported Pluto2 Adapters # # CONFIG_DVB_PLUTO2 is not set # # Supported DVB Frontends # # # Customise DVB Frontends # # # DVB-S (satellite) frontends # CONFIG_DVB_STV0299=y # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA80XX is not set CONFIG_DVB_MT312=y # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set # # DVB-T (terrestrial) frontends # # CONFIG_DVB_SP8870 is not set # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set CONFIG_DVB_MT352=y # CONFIG_DVB_DIB3000MB is not set # CONFIG_DVB_DIB3000MC is not set # # DVB-C (cable) frontends # # CONFIG_DVB_ATMEL_AT76C651 is not set # CONFIG_DVB_VES1820 is not set # CONFIG_DVB_TDA10021 is not set CONFIG_DVB_STV0297=y # # ATSC (North American/Korean Terresterial DTV) frontends # CONFIG_DVB_NXT2002=y # CONFIG_DVB_OR51211 is not set # CONFIG_DVB_OR51132 is not set CONFIG_DVB_BCM3510=y # CONFIG_DVB_LGDT330X is not set # # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # # CONFIG_SND is not set # # Open Sound System # CONFIG_SOUND_PRIME=m # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set # CONFIG_SOUND_ALI5455 is not set # CONFIG_SOUND_FORTE is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_AD1980 is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Input Devices # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # InfiniBand support # # CONFIG_INFINIBAND is not set # # SN Devices # # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # # XFS support # CONFIG_XFS_FS=y CONFIG_XFS_EXPORT=y # CONFIG_XFS_RT is not set # CONFIG_XFS_QUOTA is not set # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15" CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Profiling support # CONFIG_PROFILING=y CONFIG_OPROFILE=m # # Kernel hacking # # CONFIG_PRINTK_TIME is not set CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_FRAME_POINTER is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES_586 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # CONFIG_CRYPTO_DEV_PADLOCK is not set # # Library routines # # CONFIG_CRC_CCITT is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y
Attachment:
signature.asc
Description: OpenPGP digital signature
- Prev by Date: [patch 7/8] w100fb: Update corgi platform code to match new driver
- Next by Date: [patch 8/8] Input: Add a new switch event type
- Previous by thread: [patch 7/8] w100fb: Update corgi platform code to match new driver
- Next by thread: [patch 8/8] Input: Add a new switch event type
- Index(es):
