quick question; did usb hid change from .12 to .13-rc3 on x86_64?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I've a quick question before I start digging through patches between .12 and .13-rc3, /dev/input/mice (usb mice) stopped yielding data. dmesg indicates removal/re-insertion of the device but no driver registers and nothing comes from /dev/input/mice.

I have rc-3 on other machines and the mouse is working fine, so it's got to be something specific to this machine. It's an AMD64 machine.

0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
       Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
       Flags: bus master, medium devsel, latency 64, IRQ 201
       I/O ports at b400 [size=32]
       Capabilities: [80] Power Management version 2

0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
       Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
       Flags: bus master, medium devsel, latency 64, IRQ 201
       I/O ports at b800 [size=32]
       Capabilities: [80] Power Management version 2

0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
       Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
       Flags: bus master, medium devsel, latency 64, IRQ 201
       I/O ports at c000 [size=32]
       Capabilities: [80] Power Management version 2

0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
       Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
       Flags: bus master, medium devsel, latency 64, IRQ 201
       I/O ports at c400 [size=32]
       Capabilities: [80] Power Management version 2

0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
       Subsystem: ASUSTeK Computer Inc. A7V600 motherboard
       Flags: bus master, medium devsel, latency 64, IRQ 201
       Memory at fdf00000 (32-bit, non-prefetchable) [size=256]
       Capabilities: [80] Power Management version 2


Scott ~ # zcat /proc/config.gz|egrep -i "^CON.*(_hid|mouse)"
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_IDMOUSE=y

2.6.12:
usb 3-2: USB disconnect, address 2
usb 3-2: new low speed USB device using uhci_hcd and address 3
midi: probe of 3-2:1.0 failed with error -5
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-2

2.6.13-rc3
usb 3-2: USB disconnect, address 2
usb 3-2: new low speed USB device using uhci_hcd and address 3
midi: probe of 3-2:1.0 failed with error -5

david

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux