This adds support for powering Zaurus's video up and down. PDA without
screen is kind of useless, so it is quite important... I'll have to
figure out how to really control the frontlight, because LCD without
that is quite hard to read.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
+obj-$(CONFIG_SHARP_LOCOMO) += locomolcd.o
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
new file mode 100644
--- /dev/null
+++ b/drivers/video/backlight/locomolcd.c
@@ -0,0 +1,156 @@
+/*
+ * Backlight control code for Sharp Zaurus SL-5500
+ *
+ * Copyright 2005 John Lenz <[email protected]>
+ * GPL v2
+ *
+ */
+
+/* LCD power functions */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+
+#include <asm/hardware/locomo.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch/collie.h>
+#else
+#include <asm/arch/poodle.h>
+#endif
+
+extern void (*sa1100fb_lcd_power)(int on);
+
+static struct locomo_dev *locomolcd_dev = NULL;
+
+static void locomolcd_on(int comadj)
+{
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 1);
+ mdelay(2);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 1);
+ mdelay(2);
+
+ locomo_m62332_senddata(locomolcd_dev, comadj, 0);
+ mdelay(5);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 1);
+ mdelay(10);
+
+ /* TFTCRST | CPSOUT=0 | CPSEN */
+ locomo_writel(0x01, locomolcd_dev->mapbase + LOCOMO_TC);
+
+ /* Set CPSD */
+ locomo_writel(6, locomolcd_dev->mapbase + LOCOMO_CPSD);
+
+ /* TFTCRST | CPSOUT=0 | CPSEN */
+ locomo_writel((0x04 | 0x01), locomolcd_dev->mapbase + LOCOMO_TC);
+ mdelay(10);
+
+ locomo_gpio_set_dir(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 1);
+}
+
+static void locomolcd_off(int comadj)
+{
+ /* TFTCRST=1 | CPSOUT=1 | CPSEN = 0 */
+ locomo_writel(0x06, locomolcd_dev->mapbase + LOCOMO_TC);
+ mdelay(1);
+
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHA_ON, 0);
+ mdelay(110);
+
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VEE_ON, 0);
+ mdelay(700);
+
+ /* TFTCRST=0 | CPSOUT=0 | CPSEN = 0 */
+ locomo_writel(0, locomolcd_dev->mapbase + LOCOMO_TC);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_MOD, 0);
+ locomo_gpio_write(locomolcd_dev, LOCOMO_GPIO_LCD_VSHD_ON, 0);
+}
+
+void locomolcd_power(int on)
+{
+ int comadj = 118;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (!locomolcd_dev) {
+ local_irq_restore(flags);
+ return;
+ }
+
+ /* read comadj */
+#ifdef CONFIG_MACH_POODLE
+ comadj = 118;
+#else
+ comadj = 128;
+#endif
+
+ if (on)
+ locomolcd_on(comadj);
+ else
+ locomolcd_off(comadj);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(locomolcd_power);
+
+static int poodle_lcd_probe(struct locomo_dev *dev)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ locomolcd_dev = dev;
+
+ /* the poodle_lcd_power function is called for the first time
+ * from fs_initcall, which is before locomo is activated.
+ * We need to recall poodle_lcd_power here*/
+#ifdef CONFIG_MACH_POODLE
+ locomolcd_power(1);
+#endif
+ local_irq_restore(flags);
+ return 0;
+}
+
+static int poodle_lcd_remove(struct locomo_dev *dev)
+{
+ unsigned long flags;
+ local_irq_save(flags);
+ locomolcd_dev = NULL;
+ local_irq_restore(flags);
+ return 0;
+}
+
+static struct locomo_driver poodle_lcd_driver = {
+ .drv = {
+ .name = "locomo-backlight",
+ },
+ .devid = LOCOMO_DEVID_BACKLIGHT,
+ .probe = poodle_lcd_probe,
+ .remove = poodle_lcd_remove,
+};
+
+static int __init poodle_lcd_init(void)
+{
+ int ret;
+
+ ret = locomo_driver_register(&poodle_lcd_driver);
+ if (ret) return ret;
+
+#ifdef CONFIG_SA1100_COLLIE
+ sa1100fb_lcd_power = locomolcd_power;
+#endif
+
+ return 0;
+}
+device_initcall(poodle_lcd_init);
+
--
teflon -- maybe it is a trademark, but it should not be.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |