[2.6 patch] remove sound/oss/skeleton.c

[Adrian Bunk <bunk@stusta.de>]

We do no longer need a template for OSS drivers.


Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 sound/oss/skeleton.c |  219 -------------------------------------------
 1 files changed, 219 deletions(-)

--- linux-2.6.13-rc3-mm1-full/sound/oss/skeleton.c	2005-06-17 21:48:29.000000000 +0200
+++ /dev/null	2005-04-28 03:52:17.000000000 +0200
@@ -1,219 +0,0 @@
-/*
- *	PCI sound skeleton example
- *
- *	(c) 1998 Red Hat Software
- *
- *	This software may be used and distributed according to the 
- *	terms of the GNU General Public License, incorporated herein by 
- *	reference.
- *
- *	This example is designed to be built in the linux/drivers/sound
- *	directory as part of a kernel build. The example is modular only
- *	drop me a note once you have a working modular driver and want
- *	to integrate it with the main code.
- *		-- Alan <alan@redhat.com>
- *
- *	This is a first draft. Please report any errors, corrections or
- *	improvements to me.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-
-#include "sound_config.h"
-
-/*
- *	Define our PCI vendor ID here
- */
- 
-#ifndef PCI_VENDOR_MYIDENT
-#define PCI_VENDOR_MYIDENT			0x125D
-
-/*
- *	PCI identity for the card.
- */
- 
-#define PCI_DEVICE_ID_MYIDENT_MYCARD1		0x1969
-#endif
-
-#define CARD_NAME	"ExampleWave 3D Pro Ultra ThingyWotsit"
-
-#define MAX_CARDS	8
-
-/*
- *	Each address_info object holds the information about one of
- *	our card resources. In this case the MSS emulation of our
- *	ficticious card. Its used to manage and attach things.
- */
- 
-static struct address_info	mss_data[MAX_CARDS];
-static int 			cards;
-
-/*
- *	Install the actual card. This is an example
- */
-
-static int mycard_install(struct pci_dev *pcidev)
-{
-	int iobase;
-	int mssbase;
-	int mpubase;
-	u8 x;
-	u16 w;
-	u32 v;
-	int i;
-	int dma;
-
-	/*
-	 *	Our imaginary code has its I/O on PCI address 0, a
-	 *	MSS on PCI address 1 and an MPU on address 2
-	 *
-	 *	For the example we will only initialise the MSS
-	 */
-	 	
-	iobase = pci_resource_start(pcidev, 0);
-	mssbase = pci_resource_start(pcidev, 1);
-	mpubase = pci_resource_start(pcidev, 2);
-	
-	/*
-	 *	Reset the board
-	 */
-	 
-	/*
-	 *	Wait for completion. udelay() waits in microseconds
-	 */
-	 
-	udelay(100);
-	
-	/*
-	 *	Ok card ready. Begin setup proper. You might for example
-	 *	load the firmware here
-	 */
-	
-	dma = card_specific_magic(ioaddr);
-	
-	/*
-	 *	Turn on legacy mode (example), There are also byte and
-	 *	dword (32bit) PCI configuration function calls
-	 */
-
-	pci_read_config_word(pcidev, 0x40, &w);
-	w&=~(1<<15);			/* legacy decode on */
-	w|=(1<<14);			/* Reserved write as 1 in this case */
-	w|=(1<<3)|(1<<1)|(1<<0);	/* SB on , FM on, MPU on */
-	pci_write_config_word(pcidev, 0x40, w);
-	
-	/*
-	 *	Let the user know we found his toy.
-	 */
-	 
-	printk(KERN_INFO "Programmed "CARD_NAME" at 0x%X to legacy mode.\n",
-		iobase);
-		
-	/*
-	 *	Now set it up the description of the card
-	 */
-	 
-	mss_data[cards].io_base = mssbase;
-	mss_data[cards].irq = pcidev->irq;
-	mss_data[cards].dma = dma;
-	
-	/*
-	 *	Check there is an MSS present
-	 */
-
-	if(ad1848_detect(mssbase, NULL, mss_data[cards].osp)==0)
-		return 0;
-		
-	/*
-	 *	Initialize it
-	 */
-	 
-	mss_data[cards].slots[3] = ad1848_init("MyCard MSS 16bit", 
-			mssbase,
-			mss_data[cards].irq,
-			mss_data[cards].dma,
-			mss_data[cards].dma,
-			0,
-			0,
-			THIS_MODULE);
-
-	cards++;	
-	return 1;
-}
-
-
-/*
- * 	This loop walks the PCI configuration database and finds where
- *	the sound cards are.
- */
- 
-int init_mycard(void)
-{
-	struct pci_dev *pcidev=NULL;
-	int count=0;
-		
-	while((pcidev = pci_find_device(PCI_VENDOR_MYIDENT, PCI_DEVICE_ID_MYIDENT_MYCARD1, pcidev))!=NULL)
-	{
-		if (pci_enable_device(pcidev))
-			continue;
-		count+=mycard_install(pcidev);
-		if(count)
-			return 0;
-		if(count==MAX_CARDS)
-			break;
-	}
-	
-	if(count==0)
-		return -ENODEV;
-	return 0;
-}
-
-/*
- *	This function is called when the user or kernel loads the 
- *	module into memory.
- */
-
-
-int init_module(void)
-{
-	if(init_mycard()<0)
-	{
-		printk(KERN_ERR "No "CARD_NAME" cards found.\n");
-		return -ENODEV;
-	}
-
-	return 0;
-}
-
-/*
- *	This is called when it is removed. It will only be removed 
- *	when its use count is 0.
- */
- 
-void cleanup_module(void)
-{
-	for(i=0;i< cards; i++)
-	{
-		/*
-		 *	Free attached resources
-		 */
-		 
-		ad1848_unload(mss_data[i].io_base,
-			      mss_data[i].irq,
-			      mss_data[i].dma,
-			      mss_data[i].dma,
-			      0);
-		/*
-		 *	And disconnect the device from the kernel
-		 */
-		sound_unload_audiodevice(mss_data[i].slots[3]);
-	}
-}
-

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/