Hi,
this patch changes a bit of indentation. Currently it is
if (i8xx_tcp_pci) {
...
return 1;
}
return 0;
Now it will be
if (!i8xx_tcp_pci)
return 0;
...
return 1;
Also some superfluous spaces are killed to match Codingstyle.
Signed-off-by: Rolf Eike Beer <[email protected]>
--- linux-2.6.13-rc3/drivers/char/watchdog/i8xx_tco.c 2005-07-13 06:46:46.000000000 +0200
+++ linux-2.6.13-rc3-eike/drivers/char/watchdog/i8xx_tco.c 2005-07-20 10:22:18.000000000 +0200
@@ -391,7 +391,7 @@ MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_t
* Init & exit routines
*/
-static unsigned char __init i8xx_tco_getdevice (void)
+static unsigned char __init i8xx_tco_getdevice(void)
{
struct pci_dev *dev = NULL;
u8 val1, val2;
@@ -407,47 +407,47 @@ static unsigned char __init i8xx_tco_get
}
}
- if (i8xx_tco_pci) {
- /*
- * Find the ACPI base I/O address which is the base
- * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
- * ACPIBASE is bits [15:7] from 0x40-0x43
- */
- pci_read_config_byte (i8xx_tco_pci, 0x40, &val1);
- pci_read_config_byte (i8xx_tco_pci, 0x41, &val2);
- badr = ((val2 << 1) | (val1 >> 7)) << 7;
- ACPIBASE = badr;
- /* Something's wrong here, ACPIBASE has to be set */
- if (badr == 0x0001 || badr == 0x0000) {
- printk (KERN_ERR PFX "failed to get TCOBASE address\n");
- return 0;
- }
- /*
- * Check chipset's NO_REBOOT bit
- */
+ if (!i8xx_tco_pci)
+ return 0;
+
+ /*
+ * Find the ACPI base I/O address which is the base
+ * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
+ * ACPIBASE is bits [15:7] from 0x40-0x43
+ */
+ pci_read_config_byte(i8xx_tco_pci, 0x40, &val1);
+ pci_read_config_byte(i8xx_tco_pci, 0x41, &val2);
+ badr = ((val2 << 1) | (val1 >> 7)) << 7;
+ ACPIBASE = badr;
+ /* Something's wrong here, ACPIBASE has to be set */
+ if (badr == 0x0001 || badr == 0x0000) {
+ printk(KERN_ERR PFX "failed to get TCOBASE address\n");
+ return 0;
+ }
+ /*
+ * Check chipset's NO_REBOOT bit
+ */
+ pci_read_config_byte(i8xx_tco_pci, 0xd4, &val1);
+ if (val1 & 0x02) {
+ val1 &= 0xfd;
+ pci_write_config_byte(i8xx_tco_pci, 0xd4, val1);
pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
if (val1 & 0x02) {
- val1 &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- printk (KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
- return 0; /* Cannot reset NO_REBOOT bit */
- }
- }
- /* Set the TCO_EN bit in SMI_EN register */
- if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- SMI_EN + 1);
- return 0;
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n");
+ return 0; /* Cannot reset NO_REBOOT bit */
}
- val1 = inb (SMI_EN + 1);
- val1 &= 0xdf;
- outb (val1, SMI_EN + 1);
- release_region (SMI_EN + 1, 1);
- return 1;
}
- return 0;
+ /* Set the TCO_EN bit in SMI_EN register */
+ if (!request_region(SMI_EN + 1, 1, "i8xx TCO")) {
+ printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ SMI_EN + 1);
+ return 0;
+ }
+ val1 = inb(SMI_EN + 1);
+ val1 &= 0xdf;
+ outb(val1, SMI_EN + 1);
+ release_region(SMI_EN + 1, 1);
+ return 1;
}
static int __init watchdog_init (void)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|