On Sun, 17 Jul 2005, Bodo Eggert wrote:
> These patches change some menus into menuconfig options.
>
> Reworked to apply to linux-2.6.13-rc3-git3
Mostly robotic works.
drivers/acpi/Kconfig | 10 ++--------
drivers/cdrom/Kconfig | 8 ++------
drivers/char/ipmi/Kconfig | 5 +----
drivers/char/tpm/Kconfig | 7 +------
drivers/char/watchdog/Kconfig | 6 +-----
drivers/fc4/Kconfig | 7 +------
drivers/i2c/Kconfig | 7 +------
drivers/ide/Kconfig | 6 +-----
drivers/ieee1394/Kconfig | 6 +-----
drivers/infiniband/Kconfig | 6 +-----
drivers/isdn/Kconfig | 9 ++-------
drivers/isdn/hardware/avm/Kconfig | 9 ++-------
drivers/isdn/hardware/eicon/Kconfig | 9 ++-------
drivers/isdn/hisax/Kconfig | 9 ++-------
drivers/md/Kconfig | 7 +------
drivers/media/dvb/Kconfig | 8 ++------
drivers/message/fusion/Kconfig | 16 ++++++----------
drivers/message/i2o/Kconfig | 8 +-------
drivers/mmc/Kconfig | 8 ++------
drivers/mtd/Kconfig | 7 +------
drivers/mtd/nand/Kconfig | 14 +++++---------
drivers/net/Kconfig | 22 ++++++++++++++--------
drivers/net/arcnet/Kconfig | 9 ++-------
drivers/net/irda/Kconfig | 8 +++++---
drivers/net/pcmcia/Kconfig | 9 ++-------
drivers/net/tokenring/Kconfig | 9 ++-------
drivers/net/tulip/Kconfig | 9 ++-------
drivers/net/wan/Kconfig | 9 ++-------
drivers/net/wireless/Kconfig | 9 ++-------
drivers/parport/Kconfig | 8 ++------
drivers/pci/hotplug/Kconfig | 7 +------
drivers/pcmcia/Kconfig | 6 +-----
drivers/pnp/Kconfig | 7 +------
drivers/scsi/Kconfig | 6 +-----
drivers/scsi/pcmcia/Kconfig | 7 +++++--
drivers/telephony/Kconfig | 9 ++-------
drivers/usb/serial/Kconfig | 7 +------
drivers/video/logo/Kconfig | 9 ++-------
drivers/w1/Kconfig | 8 ++------
fs/Kconfig | 4 ----
fs/nls/Kconfig | 8 ++------
fs/partitions/Kconfig | 2 +-
fs/xfs/Kconfig | 17 +++++++----------
init/Kconfig | 17 +++++++----------
sound/Kconfig | 25 +++++++------------------
sound/oss/Kconfig | 2 +-
46 files changed, 112 insertions(+), 293 deletions(-)
Signed-Off-By: Bodo Eggert <[email protected]>
diff -rNup a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
--- a/drivers/acpi/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/acpi/Kconfig 2005-07-17 08:26:09.000000000 +0200
@@ -2,16 +2,12 @@
# ACPI Configuration
#
-menu "ACPI (Advanced Configuration and Power Interface) Support"
+menuconfig ACPI
+ bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on PM
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
-
-config ACPI
- bool "ACPI Support"
- depends on IA64 || X86
-
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
@@ -363,5 +359,3 @@ config ACPI_HOTPLUG_MEMORY
command:
$>modprobe acpi_memhotplug
endif # ACPI
-
-endmenu
diff -rNup a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig
--- a/drivers/cdrom/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/cdrom/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# CDROM driver configuration
#
-menu "Old CD-ROM drivers (not SCSI, not IDE)"
+menuconfig CD_NO_IDESCSI
+ bool "Old CD-ROM drivers (not SCSI, IDE or ATAPI)"
depends on ISA
-
-config CD_NO_IDESCSI
- bool "Support non-SCSI/IDE/ATAPI CDROM drives"
---help---
If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y
here, otherwise N. Read the CD-ROM-HOWTO, available from
@@ -209,5 +207,3 @@ config CDU535
To compile this driver as a module, choose M here: the
module will be called sonycd535.
-
-endmenu
diff -rNup a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
--- a/drivers/char/ipmi/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/char/ipmi/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,8 +2,7 @@
# IPMI device configuration
#
-menu "IPMI"
-config IPMI_HANDLER
+menuconfig IPMI_HANDLER
tristate 'IPMI top-level message handler'
help
This enables the central IPMI message handler, required for IPMI
@@ -63,5 +62,3 @@ config IPMI_POWEROFF
help
This enables a function to power off the system with IPMI if
the IPMI management controller is capable of this.
-
-endmenu
diff -rNup a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
--- a/drivers/char/tpm/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/char/tpm/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# TPM device configuration
#
-menu "TPM devices"
-
-config TCG_TPM
+menuconfig TCG_TPM
tristate "TPM Hardware Support"
depends on EXPERIMENTAL && PCI
---help---
@@ -34,6 +32,3 @@ config TCG_ATMEL
If you have a TPM security chip from Atmel say Yes and it
will be accessible from within Linux. To compile this driver
as a module, choose M here; the module will be called tpm_atmel.
-
-endmenu
-
diff -rNup a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
--- a/drivers/char/watchdog/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/char/watchdog/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# Watchdog device configuration
#
-menu "Watchdog Cards"
-
-config WATCHDOG
+menuconfig WATCHDOG
bool "Watchdog Timer Support"
---help---
If you say Y here (and to one of the following options) and create a
@@ -555,5 +553,3 @@ config USBPCWATCHDOG
module will be called pcwd_usb.
Most people will say N.
-
-endmenu
diff -rNup a/drivers/fc4/Kconfig b/drivers/fc4/Kconfig
--- a/drivers/fc4/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/fc4/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# FC4 device configuration
#
-menu "Fibre Channel support"
-
-config FC4
+menuconfig FC4
tristate "Fibre Channel and FC4 SCSI support"
---help---
Fibre Channel is a high speed serial protocol mainly used to
@@ -76,6 +74,3 @@ config SCSI_FCAL
config SCSI_FCAL
prompt "Generic FC-AL disk driver"
depends on FC4!=n && SCSI && !SPARC32 && !SPARC64
-
-endmenu
-
diff -rNup a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
--- a/drivers/i2c/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/i2c/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# Character device configuration
#
-menu "I2C support"
-
-config I2C
+menuconfig I2C
tristate "I2C support"
---help---
I2C (pronounce: I-square-C) is a slow serial bus protocol used in
@@ -72,6 +70,3 @@ config I2C_DEBUG_CHIP
debug messages to the system log. Select this if you are having
a problem with I2C support and want to see more of what is going
on.
-
-endmenu
-
diff -rNup a/drivers/ide/Kconfig b/drivers/ide/Kconfig
--- a/drivers/ide/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/ide/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -4,9 +4,7 @@
# Andre Hedrick <[email protected]>
#
-menu "ATA/ATAPI/MFM/RLL support"
-
-config IDE
+menuconfig IDE
tristate "ATA/ATAPI/MFM/RLL support"
---help---
If you say Y here, your kernel will be able to manage low cost mass
@@ -1058,5 +1056,3 @@ config BLK_DEV_HD
def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY
endif
-
-endmenu
diff -rNup a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig
--- a/drivers/ieee1394/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/ieee1394/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,8 +1,6 @@
# -*- shell-script -*-
-menu "IEEE 1394 (FireWire) support"
-
-config IEEE1394
+menuconfig IEEE1394
tristate "IEEE 1394 (FireWire) support"
depends on PCI || BROKEN
select NET
@@ -191,5 +189,3 @@ config IEEE1394_AMDTP
To compile this driver as a module, say M here: the
module will be called amdtp.
-
-endmenu
diff -rNup a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig
--- a/drivers/infiniband/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/infiniband/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,6 +1,4 @@
-menu "InfiniBand support"
-
-config INFINIBAND
+menuconfig INFINIBAND
tristate "InfiniBand support"
---help---
Core support for InfiniBand (IB). Make sure to also select
@@ -20,5 +18,3 @@ config INFINIBAND_USER_VERBS
source "drivers/infiniband/hw/mthca/Kconfig"
source "drivers/infiniband/ulp/ipoib/Kconfig"
-
-endmenu
diff -rNup a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig
--- a/drivers/isdn/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/isdn/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,8 @@
# ISDN device configuration
#
-menu "ISDN subsystem"
-
-config ISDN
- tristate "ISDN support"
+menuconfig ISDN
+ tristate "ISDN subsystem"
depends on NET
---help---
ISDN ("Integrated Services Digital Networks", called RNIS in France)
@@ -62,6 +60,3 @@ config ISDN_CAPI
source "drivers/isdn/capi/Kconfig"
source "drivers/isdn/hardware/Kconfig"
-
-endmenu
-
diff -rNup a/drivers/isdn/hardware/avm/Kconfig b/drivers/isdn/hardware/avm/Kconfig
--- a/drivers/isdn/hardware/avm/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/isdn/hardware/avm/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# ISDN AVM drivers
#
-menu "Active AVM cards"
+menuconfig CAPI_AVM
+ bool "Active AVM cards"
depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_AVM
- bool "Support AVM cards"
help
Enable support for AVM active ISDN cards.
@@ -61,6 +59,3 @@ config ISDN_DRV_AVMB1_C4
help
Enable support for the AVM C4/C2 PCI cards.
These cards handle 4/2 BRI ISDN lines (8/4 channels).
-
-endmenu
-
diff -rNup a/drivers/isdn/hardware/eicon/Kconfig b/drivers/isdn/hardware/eicon/Kconfig
--- a/drivers/isdn/hardware/eicon/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/isdn/hardware/eicon/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# ISDN DIVAS Eicon driver
#
-menu "Active Eicon DIVA Server cards"
- depends on NET && ISDN && ISDN_CAPI!=n
-
-config CAPI_EICON
+menuconfig CAPI_EICON
bool "Support Eicon cards"
+ depends on NET && ISDN && ISDN_CAPI!=n
help
Enable support for Eicon Networks active ISDN cards.
@@ -48,6 +46,3 @@ config ISDN_DIVAS_MAINT
depends on ISDN_DIVAS && m
help
Enable Divas Maintainance driver.
-
-endmenu
-
diff -rNup a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
--- a/drivers/isdn/hisax/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/isdn/hisax/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,9 +1,7 @@
-menu "Passive cards"
+menuconfig ISDN_DRV_HISAX
+ tristate "Passive cards (HiSax, HFC)"
depends on ISDN_I4L
-
-config ISDN_DRV_HISAX
- tristate "HiSax SiemensChipSet driver support"
select CRC_CCITT
---help---
This is a driver supporting the Siemens chipset on various
@@ -437,6 +435,3 @@ config HISAX_AVM_A1_PCMCIA
default y
endif
-
-endmenu
-
diff -rNup a/drivers/md/Kconfig b/drivers/md/Kconfig
--- a/drivers/md/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/md/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# Block device driver configuration
#
-menu "Multi-device support (RAID and LVM)"
-
-config MD
+menuconfig MD
bool "Multiple devices driver support (RAID and LVM)"
help
Support multiple physical spindles through a single logical device.
@@ -235,6 +233,3 @@ config DM_MULTIPATH_EMC
depends on DM_MULTIPATH && BLK_DEV_DM && EXPERIMENTAL
---help---
Multipath support for EMC CX/AX series hardware.
-
-endmenu
-
diff -rNup a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
--- a/drivers/media/dvb/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/media/dvb/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,8 @@
# Multimedia device configuration
#
-menu "Digital Video Broadcasting Devices"
-
-config DVB
- bool "DVB For Linux"
+menuconfig DVB
+ bool "Digital Video Broadcasting Devices"
depends on NET && INET
---help---
Support Digital Video Broadcasting hardware. Enable this if you
@@ -47,5 +45,3 @@ source "drivers/media/dvb/pluto2/Kconfig
comment "Supported DVB Frontends"
depends on DVB_CORE
source "drivers/media/dvb/frontends/Kconfig"
-
-endmenu
diff -rNup a/drivers/message/fusion/Kconfig b/drivers/message/fusion/Kconfig
--- a/drivers/message/fusion/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/message/fusion/Kconfig 2005-07-17 09:21:13.000000000 +0200
@@ -1,14 +1,13 @@
-menu "Fusion MPT device support"
-
-config FUSION
- bool
+menuconfig FUSION
+ bool "Fusion MPT device support"
+ depends on PCI && SCSI
default n
+if FUSION
+
config FUSION_SPI
tristate "Fusion MPT ScsiHost drivers for SPI"
- depends on PCI && SCSI
- select FUSION
---help---
SCSI HOST support for a parallel SCSI host adapters.
@@ -21,8 +20,6 @@ config FUSION_SPI
config FUSION_FC
tristate "Fusion MPT ScsiHost drivers for FC"
- depends on PCI && SCSI
- select FUSION
---help---
SCSI HOST support for a Fiber Channel host adapters.
@@ -37,7 +34,6 @@ config FUSION_FC
config FUSION_MAX_SGE
int "Maximum number of scatter gather entries (16 - 128)"
- depends on FUSION
default "128"
range 16 128
help
@@ -83,4 +79,4 @@ config FUSION_LAN
If unsure whether you really want or need this, say N.
-endmenu
+endif
diff -rNup a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
--- a/drivers/message/i2o/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/message/i2o/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,7 +1,4 @@
-
-menu "I2O device support"
-
-config I2O
+menuconfig I2O
tristate "I2O support"
depends on PCI
---help---
@@ -106,6 +103,3 @@ config I2O_PROC
To compile this support as a module, choose M here: the
module will be called i2o_proc.
-
-endmenu
-
diff -rNup a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
--- a/drivers/mmc/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/mmc/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,8 @@
# MMC subsystem configuration
#
-menu "MMC/SD Card support"
-
-config MMC
- tristate "MMC support"
+menuconfig MMC
+ tristate "MMC/SD Card support"
help
MMC is the "multi-media card" bus protocol.
@@ -59,5 +57,3 @@ config MMC_WBSD
SD/MMC card reader, say Y or M here.
If unsure, say N.
-
-endmenu
diff -rNup a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
--- a/drivers/mtd/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/mtd/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,8 +1,6 @@
# $Id: Kconfig,v 1.7 2004/11/22 11:33:56 ijc Exp $
-menu "Memory Technology Devices (MTD)"
-
-config MTD
+menuconfig MTD
tristate "Memory Technology Device (MTD) support"
help
Memory Technology Devices are flash, RAM and similar chips, often
@@ -260,6 +258,3 @@ source "drivers/mtd/maps/Kconfig"
source "drivers/mtd/devices/Kconfig"
source "drivers/mtd/nand/Kconfig"
-
-endmenu
-
diff -rNup a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
--- a/drivers/mtd/nand/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/mtd/nand/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,11 +1,12 @@
# drivers/mtd/nand/Kconfig
# $Id: Kconfig,v 1.31 2005/06/20 12:03:21 bjd Exp $
-menu "NAND Flash Device Drivers"
- depends on MTD!=n
+config MTD_NAND_IDS
+ depends on MTD
+ tristate
-config MTD_NAND
- tristate "NAND Device Support"
+menuconfig MTD_NAND
+ tristate "NAND Flash Device Support"
depends on MTD
select MTD_NAND_IDS
help
@@ -55,9 +56,6 @@ config MTD_NAND_TOTO
help
Support for NAND flash on Texas Instruments Toto platform.
-config MTD_NAND_IDS
- tristate
-
config MTD_NAND_AU1550
tristate "Au1550 NAND support"
depends on SOC_AU1550 && MTD_NAND
@@ -190,5 +188,3 @@ config MTD_NAND_DISKONCHIP_BBTWRITE
help
The simulator may simulate verious NAND flash chips for the
MTD nand layer.
-
-endmenu
diff -rNup a/drivers/net/Kconfig b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -137,10 +137,8 @@ endif
# Ethernet
#
-menu "Ethernet (10 or 100Mbit)"
+menuconfig NET_ETHERNET
depends on NETDEVICES && !UML
-
-config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
---help---
Ethernet (also called IEEE 802.3 or ISO 8802-2) is the most common
@@ -166,6 +164,8 @@ config NET_ETHERNET
kernel: saying N will just cause the configurator to skip all
the questions about Ethernet network cards. If unsure, say N.
+if NET_ETHERNET
+
config MII
tristate "Generic Media Independent Interface device support"
depends on NET_ETHERNET
@@ -1753,15 +1753,18 @@ config NE_H8300
source "drivers/net/fec_8xx/Kconfig"
-endmenu
+endif
#
# Gigabit Ethernet
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NET_ETHERNET1000
+ bool "Ethernet (1 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET1000
+
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
depends on PCI
@@ -2084,15 +2087,18 @@ config MV643XX_ETH_2
This enables support for Port 2 of the Marvell MV643XX Gigabit
Ethernet.
-endmenu
+endif
#
# 10 Gigabit Ethernet
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NET_ETHERNET10_000
+ bool "Ethernet (10 Gbit)"
depends on NETDEVICES && !UML
+if NET_ETHERNET10_000
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
@@ -2168,7 +2174,7 @@ config 2BUFF_MODE
physical memory loactions comes with a heavy price.
If not sure please say N.
-endmenu
+endif
if !UML
source "drivers/net/tokenring/Kconfig"
diff -rNup a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig
--- a/drivers/net/arcnet/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/arcnet/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# Arcnet configuration
#
-menu "ARCnet devices"
+menuconfig ARCNET
+ tristate "ARCnet device support"
depends on NETDEVICES && (ISA || PCI)
-
-config ARCNET
- tristate "ARCnet support"
---help---
If you have a network card of this type, say Y and check out the
(arguably) beautiful poetry in
@@ -135,6 +133,3 @@ config ARCNET_COM20020_ISA
config ARCNET_COM20020_PCI
tristate "Support for COM20020 on PCI"
depends on ARCNET_COM20020 && PCI
-
-endmenu
-
diff -rNup a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
--- a/drivers/net/irda/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/irda/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,7 +1,10 @@
-menu "Infrared-port device drivers"
+menuconfig IRDA_DEVICES
+ bool "Infrared-port device drivers"
depends on IRDA!=n
+if IRDA_DEVICES
+
comment "SIR device drivers"
config IRTTY_SIR
@@ -400,5 +403,4 @@ config VIA_FIR
To compile it as a module, choose M here: the module will be called
via-ircc.
-endmenu
-
+endif
diff -rNup a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
--- a/drivers/net/pcmcia/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/pcmcia/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# PCMCIA Network device configuration
#
-menu "PCMCIA network device support"
- depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
bool "PCMCIA network device support"
+ depends on NETDEVICES && PCMCIA!=n
---help---
Say Y if you would like to include support for any PCMCIA or CardBus
network adapters, then say Y to the driver for your particular card
@@ -127,6 +125,3 @@ config PCMCIA_IBMTR
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
-
-endmenu
-
diff -rNup a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
--- a/drivers/net/tokenring/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/tokenring/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,12 +2,10 @@
# Token Ring driver configuration
#
-menu "Token Ring devices"
+menuconfig TR
depends on NETDEVICES
-
-# So far, we only have PCI, ISA, and MCA token ring devices
-config TR
bool "Token Ring driver support"
+# So far, we only have PCI, ISA, and MCA token ring devices
depends on (PCI || ISA || MCA || CCW)
select LLC
help
@@ -181,6 +179,3 @@ config SMCTR
To compile this driver as a module, choose M here: the module will be
called smctr.
-
-endmenu
-
diff -rNup a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
--- a/drivers/net/tulip/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/tulip/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# Tulip family network device configuration
#
-menu "Tulip family network device support"
- depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
-
-config NET_TULIP
+menuconfig NET_TULIP
bool "\"Tulip\" family network device support"
+ depends on NET_ETHERNET && (PCI || EISA || CARDBUS)
help
This selects the "Tulip" family of EISA/PCI network cards.
@@ -161,6 +159,3 @@ config PCMCIA_XIRTULIP
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module will
be called xircom_tulip_cb. If unsure, say N.
-
-endmenu
-
diff -rNup a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
--- a/drivers/net/wan/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/wan/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# wan devices configuration
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
+ depends on NETDEVICES
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
lines, are used to interconnect Local Area Networks (LANs) over vast
@@ -602,6 +600,3 @@ config SBNI_MULTILINE
a program named 'sbniconfig' to configure adapters.
If unsure, say N.
-
-endmenu
-
diff -rNup a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
--- a/drivers/net/wireless/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/net/wireless/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,11 +2,9 @@
# Wireless LAN device configuration
#
-menu "Wireless LAN (non-hamradio)"
- depends on NETDEVICES
-
-config NET_RADIO
+menuconfig NET_RADIO
bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ depends on NETDEVICES
---help---
Support for wireless LANs and everything having to do with radio,
but not with amateur radio or FM broadcasting.
@@ -360,6 +358,3 @@ config NET_WIRELESS
bool
depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
default y
-
-endmenu
-
diff -rNup a/drivers/parport/Kconfig b/drivers/parport/Kconfig
--- a/drivers/parport/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/parport/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -5,9 +5,7 @@
# Parport configuration.
#
-menu "Parallel port support"
-
-config PARPORT
+menuconfig PARPORT
tristate "Parallel port support"
---help---
If you want to use devices connected to your machine's parallel port
@@ -83,6 +81,7 @@ config PARPORT_PC_PCMCIA
ports. If unsure, say N.
config PARPORT_NOT_PC
+ depends on PARPORT
bool
config PARPORT_ARC
@@ -140,6 +139,3 @@ config PARPORT_1284
such as EPP and ECP, say Y here to enable advanced IEEE 1284
transfer modes. Also say Y if you want device ID information to
appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N.
-
-endmenu
-
diff -rNup a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
--- a/drivers/pci/hotplug/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/pci/hotplug/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# PCI Hotplug support
#
-menu "PCI Hotplug Support"
-
-config HOTPLUG_PCI
+menuconfig HOTPLUG_PCI
tristate "Support for PCI Hotplug (EXPERIMENTAL)"
depends on PCI && EXPERIMENTAL
select HOTPLUG
@@ -193,6 +191,3 @@ config HOTPLUG_PCI_SGI
Driver for PCI devices.
When in doubt, say N.
-
-endmenu
-
diff -rNup a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
--- a/drivers/pcmcia/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/pcmcia/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# PCCARD (PCMCIA/CardBus) bus subsystem configuration
#
-menu "PCCARD (PCMCIA/CardBus) support"
-
-config PCCARD
+menuconfig PCCARD
tristate "PCCard (PCMCIA/CardBus) support"
select HOTPLUG
---help---
@@ -225,5 +223,3 @@ config PCCARD_NONSTATIC
tristate
endif # PCCARD
-
-endmenu
diff -rNup a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig
--- a/drivers/pnp/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/pnp/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,7 @@
# Plug and Play configuration
#
-menu "Plug and Play support"
-
-config PNP
+menuconfig PNP
bool "Plug and Play support"
depends on ISA || ACPI_BUS
---help---
@@ -36,6 +34,3 @@ source "drivers/pnp/isapnp/Kconfig"
source "drivers/pnp/pnpbios/Kconfig"
source "drivers/pnp/pnpacpi/Kconfig"
-
-endmenu
-
diff -rNup a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
--- a/drivers/scsi/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/scsi/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,6 +1,4 @@
-menu "SCSI device support"
-
-config SCSI
+menuconfig SCSI
tristate "SCSI device support"
---help---
If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
@@ -1792,5 +1790,3 @@ config ZFCP
endmenu
source "drivers/scsi/pcmcia/Kconfig"
-
-endmenu
diff -rNup a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
--- a/drivers/scsi/pcmcia/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/scsi/pcmcia/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,9 +2,12 @@
# PCMCIA SCSI adapter configuration
#
-menu "PCMCIA SCSI adapter support"
+menuconfig SCSI_PCMCIA
+ bool "PCMCIA SCSI adapter support"
depends on SCSI!=n && PCMCIA!=n && MODULES
+if SCSI_PCMCIA
+
config PCMCIA_AHA152X
tristate "Adaptec AHA152X PCMCIA support"
depends on m && !64BIT
@@ -79,4 +82,4 @@ config PCMCIA_SYM53C500
To compile this driver as a module, choose M here: the
module will be called sym53c500_cs.
-endmenu
+endif
diff -rNup a/drivers/telephony/Kconfig b/drivers/telephony/Kconfig
--- a/drivers/telephony/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/telephony/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,8 @@
# Telephony device configuration
#
-menu "Telephony Support"
-
-config PHONE
- tristate "Linux telephony support"
+menuconfig PHONE
+ tristate "Telephony support"
---help---
Say Y here if you have a telephony card, which for example allows
you to use a regular phone for voice-over-IP applications.
@@ -42,6 +40,3 @@ config PHONE_IXJ_PCMCIA
Say Y here to configure in PCMCIA service support for the Quicknet
cards manufactured by Quicknet Technologies, Inc. This changes the
card initialization code to work with the card manager daemon.
-
-endmenu
-
diff -rNup a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
--- a/drivers/usb/serial/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/usb/serial/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,7 @@
# USB Serial device configuration
#
-menu "USB Serial Converter support"
- depends on USB!=n
-
-config USB_SERIAL
+menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on USB
---help---
@@ -480,5 +477,3 @@ config USB_EZUSB
depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
default y
-endmenu
-
diff -rNup a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
--- a/drivers/video/logo/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/video/logo/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -2,10 +2,8 @@
# Logo configuration
#
-menu "Logo configuration"
-
-config LOGO
- bool "Bootup logo"
+menuconfig LOGO
+ bool "Bootup logo configuration"
depends on FB || SGI_NEWPORT_CONSOLE
config LOGO_LINUX_MONO
@@ -67,6 +65,3 @@ config LOGO_M32R_CLUT224
bool "224-color M32R Linux logo"
depends on LOGO && M32R
default y
-
-endmenu
-
diff -rNup a/drivers/w1/Kconfig b/drivers/w1/Kconfig
--- a/drivers/w1/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/drivers/w1/Kconfig 2005-07-17 08:23:15.000000000 +0200
@@ -1,7 +1,5 @@
-menu "Dallas's 1-wire bus"
-
-config W1
- tristate "Dallas's 1-wire support"
+menuconfig W1
+ tristate "Dallas's 1-wire bus support"
---help---
Dallas's 1-wire bus is usefull to connect slow 1-pin devices
such as iButtons and thermal sensors.
@@ -53,5 +51,3 @@ config W1_SMEM
help
Say Y here if you want to connect 1-wire
simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
-
-endmenu
diff -rNup a/fs/Kconfig b/fs/Kconfig
--- a/fs/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/fs/Kconfig 2005-07-17 08:23:16.000000000 +0200
@@ -1736,12 +1736,8 @@ config RXRPC
endmenu
-menu "Partition Types"
-
source "fs/partitions/Kconfig"
-endmenu
-
source "fs/nls/Kconfig"
endmenu
diff -rNup a/fs/nls/Kconfig b/fs/nls/Kconfig
--- a/fs/nls/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/fs/nls/Kconfig 2005-07-17 08:23:16.000000000 +0200
@@ -2,10 +2,8 @@
# Native language support configuration
#
-menu "Native Language Support"
-
-config NLS
- tristate "Base native language support"
+menuconfig NLS
+ tristate "Native language support"
---help---
The base Native Language Support. A number of filesystems
depend on it (e.g. FAT, JOLIET, NT, BEOS filesystems), as well
@@ -500,5 +498,3 @@ config NLS_UTF8
input/output character sets. Say Y here for the UTF-8 encoding of
the Unicode/ISO9646 universal character set.
-endmenu
-
diff -rNup a/fs/partitions/Kconfig b/fs/partitions/Kconfig
--- a/fs/partitions/Kconfig 2005-07-17 08:09:08.000000000 +0200
+++ b/fs/partitions/Kconfig 2005-07-17 09:52:14.000000000 +0200
@@ -1,7 +1,7 @@
#
# Partition configuration
#
-config PARTITION_ADVANCED
+menuconfig PARTITION_ADVANCED
bool "Advanced partition selection"
help
Say Y here if you would like to use hard disks under Linux which
diff -rNup a/fs/xfs/Kconfig b/fs/xfs/Kconfig
--- a/fs/xfs/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/fs/xfs/Kconfig 2005-07-17 08:23:16.000000000 +0200
@@ -1,7 +1,5 @@
-menu "XFS support"
-
-config XFS_FS
- tristate "XFS filesystem support"
+menuconfig XFS_FS
+ tristate "XFS support"
select EXPORTFS if NFSD!=n
help
XFS is a high performance journaling filesystem which originated
@@ -20,13 +18,15 @@ config XFS_FS
system of your root partition is compiled as a module, you'll need
to use an initial ramdisk (initrd) to boot.
+if XFS_FS
+
config XFS_EXPORT
bool
- default y if XFS_FS && EXPORTFS
+ default y if EXPORTFS
config XFS_RT
bool "Realtime support (EXPERIMENTAL)"
- depends on XFS_FS && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
If you say Y here you will be able to mount and use XFS filesystems
which contain a realtime subvolume. The realtime subvolume is a
@@ -43,7 +43,6 @@ config XFS_RT
config XFS_QUOTA
bool "Quota support"
- depends on XFS_FS
help
If you say Y here, you will be able to set limits for disk usage on
a per user and/or a per group basis under XFS. XFS considers quota
@@ -60,7 +59,6 @@ config XFS_QUOTA
config XFS_SECURITY
bool "Security Label support"
- depends on XFS_FS
help
Security labels support alternative access control models
implemented by security modules like SELinux. This option
@@ -72,7 +70,6 @@ config XFS_SECURITY
config XFS_POSIX_ACL
bool "POSIX ACL support"
- depends on XFS_FS
help
POSIX Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
@@ -82,4 +79,4 @@ config XFS_POSIX_ACL
If you don't know what Access Control Lists are, say N.
-endmenu
+endif
diff -rNup a/init/Kconfig b/init/Kconfig
--- a/init/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/init/Kconfig 2005-07-17 08:23:16.000000000 +0200
@@ -391,10 +391,8 @@ config BASE_SMALL
default 0 if BASE_FULL
default 1 if !BASE_FULL
-menu "Loadable module support"
-
-config MODULES
- bool "Enable loadable module support"
+menuconfig MODULES
+ bool "Loadable module support"
help
Kernel modules are small pieces of compiled code which can
be inserted in the running kernel, rather than being
@@ -413,9 +411,10 @@ config MODULES
If unsure, say Y.
+if MODULES
+
config MODULE_UNLOAD
bool "Module unloading"
- depends on MODULES
help
Without this option you will not be able to unload any
modules (note that some modules may not be unloadable
@@ -435,7 +434,6 @@ config MODULE_FORCE_UNLOAD
config OBSOLETE_MODPARM
bool
default y
- depends on MODULES
help
You need this option to use module parameters on modules which
have not been converted to the new module parameter system yet.
@@ -443,7 +441,7 @@ config OBSOLETE_MODPARM
config MODVERSIONS
bool "Module versioning support (EXPERIMENTAL)"
- depends on MODULES && EXPERIMENTAL
+ depends on EXPERIMENTAL
help
Usually, you have to use modules compiled with your kernel.
Saying Y here makes it sometimes possible to use modules
@@ -454,7 +452,6 @@ config MODVERSIONS
config MODULE_SRCVERSION_ALL
bool "Source checksum for all modules"
- depends on MODULES
help
Modules which contain a MODULE_VERSION get an extra "srcversion"
field inserted into their modinfo section, which contains a
@@ -466,7 +463,6 @@ config MODULE_SRCVERSION_ALL
config KMOD
bool "Automatic kernel module loading"
- depends on MODULES
help
Normally when you have selected some parts of the kernel to
be created as kernel modules, you must load them (using the
@@ -482,4 +478,5 @@ config STOP_MACHINE
depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
help
Need stop_machine() primitive.
-endmenu
+
+endif
diff -rNup a/sound/Kconfig b/sound/Kconfig
--- a/sound/Kconfig 2005-07-17 09:51:47.000000000 +0200
+++ b/sound/Kconfig 2005-07-17 09:57:53.000000000 +0200
@@ -1,9 +1,7 @@
# sound/Config.in
#
-menu "Sound"
-
-config SOUND
+menuconfig SOUND
tristate "Sound card support"
help
If you have a sound card in your computer, i.e. if it can say more
@@ -32,16 +30,14 @@ config SOUND
Kernel patches and supporting utilities to do that are in the pcsp
package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
+if SOUND
+
source "sound/oss/dmasound/Kconfig"
if !M68K
-menu "Advanced Linux Sound Architecture"
- depends on SOUND!=n
-
-config SND
+menuconfig SND
tristate "Advanced Linux Sound Architecture"
- depends on SOUND
help
Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
the new base sound system.
@@ -74,21 +70,14 @@ source "sound/sparc/Kconfig"
source "sound/parisc/Kconfig"
-endmenu
-
-menu "Open Sound System"
- depends on SOUND!=n && (BROKEN || (!SPARC32 && !SPARC64))
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
- depends on SOUND
+ depends on (BROKEN || (!SPARC32 && !SPARC64))
help
Say 'Y' or 'M' to enable Open Sound System drivers.
source "sound/oss/Kconfig"
-endmenu
-
endif
-endmenu
+endif
diff -rNup a/sound/oss/Kconfig b/sound/oss/Kconfig
--- a/sound/oss/Kconfig 2005-07-17 08:10:20.000000000 +0200
+++ b/sound/oss/Kconfig 2005-07-17 09:52:14.000000000 +0200
@@ -1084,7 +1084,7 @@ config SOUND_TVMIXER
config SOUND_KAHLUA
tristate "XpressAudio Sound Blaster emulation"
- depends on SOUND_SB
+ depends on SOUND_SB && SOUND_PRIME
config SOUND_ALI5455
tristate "ALi5455 audio support"
--
Top 100 things you don't want the sysadmin to say:
8. ...and after I patched the microcode...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |