Re: init 0 stopped working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 7/16/05, Martin Mokrejs <[email protected]> wrote:
> Hi,
>   I used to shutdown my P4 machine based on ASUS P4C800E-Deluxe
> with simple "init 0" command. That somehow broke between 2.6.12-rc6-git2
> and 2.6.13-rc1. The machines makes the sound like shutdown but it
> immediately turns the power on again. I used acpi and the kernel
> configs should be almost identical in all cases, as I just recopy
> previously used .config and run "make oldconfig".
> 
>   Any clues? I still happens even with 2.6.13-rc3-git2.
> Please Cc: me in replies.
> Martin


I have the same problem.
System: Debian 3.1
Hardware:
motherboard P4P800 (with bios 1019)

It may be problem around acpi in asus board. But 2.6.12.1 works good.

Regards,
Michal Piotrowski
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux