Re: Bridge changes and lost console on 2.6.13-rc3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 13, 2005 at 12:52:21PM -0400, Jon Smirl wrote:
> My machine has two child buses, AGP and PCI. I am using a PCI video
> card at 02:03.0. Only the card on bus #2 fails, the AGP card is ok. 
> Are you setting the VGA port forwarding bits correctly on the bridge
> #2 if it is the active display device?

Good catch. Actually we enable bridge VGA port forwarding for *all*
VGA devices, which is obviously incorrect.
It seems that we could safely drop VGA bits from setup-bus.c.
I'll do some testing and post a patch tomorrow.

Ivan.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux