On Tue, 12 Jul 2005, Michel Bouissou wrote:
> > To try and help pin things down, tomorrow (i.e., Tuesday) I'll send you a
> > test patch to completely disable the UHCI controllers, leaving them awake
> > and idle, not generating interrupts. If you still get those spurious
> > IRQs, they will have to come from somewhere else. (Assuming you can
> > devote server time to this sort of testing...)
>
> I'll try my best, although I will have little time for playing with this until
> the end of this week, and will be on travel next week. But if you send me a
> test patch, I'll try my best to test it.
Okay, the patch (for 2.6.12) is below. It does several things:
Prevents the system from reading the port status registers,
so the computer won't know when any devices are plugged in.
Makes the system think there always is a device plugged in,
so it will never automatically suspend the controllers.
Leaves all the interrupt-enable bits turned off, so the
controllers won't ever generate an interrupt request.
Prints a message to the system log every time the interrupt
handler is called.
In case it's not already clear, when you install this patch the UHCI
controllers will not be useable.
Alan Stern
Index: linux-2.6.12/drivers/usb/host/uhci-hub.c
===================================================================
--- linux-2.6.12.orig/drivers/usb/host/uhci-hub.c
+++ linux-2.6.12/drivers/usb/host/uhci-hub.c
@@ -38,6 +38,7 @@ static int uhci_hub_status_data(struct u
struct uhci_hcd *uhci = hcd_to_uhci(hcd);
int port;
+ return 0;
*buf = 0;
for (port = 0; port < uhci->rh_numports; ++port) {
if ((inw(uhci->io_addr + USBPORTSC1 + port * 2) & RWC_BITS) ||
@@ -154,6 +155,7 @@ static int uhci_hub_control(struct usb_h
if (to_pci_dev(hcd->self.controller)->vendor ==
PCI_VENDOR_ID_VIA)
status ^= USBPORTSC_OC;
+ status = 0;
/* UHCI doesn't support C_RESET (always false) */
wPortChange = lstatus = 0;
Index: linux-2.6.12/drivers/usb/host/uhci-hcd.c
===================================================================
--- linux-2.6.12.orig/drivers/usb/host/uhci-hcd.c
+++ linux-2.6.12/drivers/usb/host/uhci-hcd.c
@@ -169,6 +169,7 @@ static irqreturn_t uhci_irq(struct usb_h
* "HC Halted" status bit is persistent: it is RO, not R/WC.
*/
status = inw(io_addr + USBSTS);
+ dev_info(uhci_dev(uhci), "IRQ, status = %x\n", status);
if (!(status & ~USBSTS_HCH)) /* shared interrupt, not mine */
return IRQ_NONE;
outw(status, io_addr + USBSTS); /* Clear it */
@@ -282,6 +283,7 @@ static int ports_active(struct uhci_hcd
int connection = 0;
int i;
+ return 1;
for (i = 0; i < uhci->rh_numports; i++)
connection |= (inw(io_addr + USBPORTSC1 + i * 2) & USBPORTSC_CCS);
@@ -389,8 +391,10 @@ static int start_hc(struct uhci_hcd *uhc
/* Turn on PIRQ and all interrupts */
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
USBLEGSUP_DEFAULT);
+#if 0
outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP,
io_addr + USBINTR);
+#endif
/* Start at frame 0 */
outw(0, io_addr + USBFRNUM);
@@ -757,8 +761,10 @@ static int uhci_resume(struct usb_hcd *h
0);
outw(uhci->frame_number, uhci->io_addr + USBFRNUM);
outl(uhci->fl->dma_handle, uhci->io_addr + USBFLBASEADD);
+#if 0
outw(USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC |
USBINTR_SP, uhci->io_addr + USBINTR);
+#endif
uhci->resume_detect = 1;
pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP,
USBLEGSUP_DEFAULT);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |