Re: 2.6.13-rc2 (git followed) unable to boot with initrd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2005-07-12 at 01:25 -0700, Andrew Morton wrote:
> Bas Vermeulen <[email protected]> wrote:
> >
> > I am currently unable to boot 2.6.13-rc2. I've got a working 2.6.13-rc1
> >  whose .config I use to compile 2.6.13-rc2. I'm attaching the failed boot
> >  log to this message. I'm booting with the same options as 2.6.13-rc1.
> > 
> >  If anyone knows how to get it working again, I'd be grateful.
> > ...
> > VFS: Cannot open root device "LABEL=/" or unknown-block(0,0)
> > ...
> 
> This normally has a simple cause: it didn't find any disks, or a filesystem
> driver is missing.  Check your .config carefully and if that seems OK,
> generate the -rc1 and -rc2 dmesg and diff them, send us the result.

The .config between -rc1 and -rc2 are the same (I always keep the
same .config). It found the disks in -rc2 (sda - ata_piix driver), but
can't find "LABEL=/" because that's what the initrd is supposed to
mount. I've tried mounting /dev/sda6 (which is my root) directly, but
that doesn't help either.

I'll generate the diff for you in a bit.

-- 
Bas Vermeulen <[email protected]>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]
  Powered by Linux