changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
pci2000.h is unused, so drop the whole file
Signed-off-by: Olaf Hering <[email protected]>
drivers/scsi/pci2000.h | 200 -------------------------------------------------
1 files changed, 200 deletions(-)
Index: linux-2.6.13-rc2-mm1/drivers/scsi/pci2000.h
===================================================================
--- linux-2.6.13-rc2-mm1.orig/drivers/scsi/pci2000.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- * http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- * [email protected] Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef PSI_EIDE_SCSIOP
-#define PSI_EIDE_SCSIOP 1
-
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif
-#define LINUXVERSION(v,p,s) (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/* definition of standard data types */
-/************************************************/
-#define CHAR char
-#define UCHAR unsigned char
-#define SHORT short
-#define USHORT unsigned short
-#define BOOL long
-#define LONG long
-#define ULONG unsigned long
-#define VOID void
-
-typedef CHAR *PCHAR;
-typedef UCHAR *PUCHAR;
-typedef SHORT *PSHORT;
-typedef USHORT *PUSHORT;
-typedef BOOL *PBOOL;
-typedef LONG *PLONG;
-typedef ULONG *PULONG;
-typedef VOID *PVOID;
-
-
-/************************************************/
-/* Misc. macros */
-/************************************************/
-#define ANY2SCSI(up, p) -((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); -((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up) -( (((long)*(((UCHAR *)up))) << 16) -+ (((long)(((UCHAR *)up)[1])) << 8) -+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p) -((UCHAR *)up)[0] = ((long)(p)) >> 24; -((UCHAR *)up)[1] = ((long)(p)) >> 16; -((UCHAR *)up)[2] = ((long)(p)) >> 8; -((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up) -( (((long)(((UCHAR *)up)[0])) << 24) -+ (((long)(((UCHAR *)up)[1])) << 16) -+ (((long)(((UCHAR *)up)[2])) << 8) -+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/* SCSI CDB operation codes */
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY 0x00
-#define SCSIOP_REZERO_UNIT 0x01
-#define SCSIOP_REWIND 0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR 0x02
-#define SCSIOP_REQUEST_SENSE 0x03
-#define SCSIOP_FORMAT_UNIT 0x04
-#define SCSIOP_READ_BLOCK_LIMITS 0x05
-#define SCSIOP_REASSIGN_BLOCKS 0x07
-#define SCSIOP_READ6 0x08
-#define SCSIOP_RECEIVE 0x08
-#define SCSIOP_WRITE6 0x0A
-#define SCSIOP_PRINT 0x0A
-#define SCSIOP_SEND 0x0A
-#define SCSIOP_SEEK6 0x0B
-#define SCSIOP_TRACK_SELECT 0x0B
-#define SCSIOP_SLEW_PRINT 0x0B
-#define SCSIOP_SEEK_BLOCK 0x0C
-#define SCSIOP_PARTITION 0x0D
-#define SCSIOP_READ_REVERSE 0x0F
-#define SCSIOP_WRITE_FILEMARKS 0x10
-#define SCSIOP_FLUSH_BUFFER 0x10
-#define SCSIOP_SPACE 0x11
-#define SCSIOP_INQUIRY 0x12
-#define SCSIOP_VERIFY6 0x13
-#define SCSIOP_RECOVER_BUF_DATA 0x14
-#define SCSIOP_MODE_SELECT 0x15
-#define SCSIOP_RESERVE_UNIT 0x16
-#define SCSIOP_RELEASE_UNIT 0x17
-#define SCSIOP_COPY 0x18
-#define SCSIOP_ERASE 0x19
-#define SCSIOP_MODE_SENSE 0x1A
-#define SCSIOP_START_STOP_UNIT 0x1B
-#define SCSIOP_STOP_PRINT 0x1B
-#define SCSIOP_LOAD_UNLOAD 0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C
-#define SCSIOP_SEND_DIAGNOSTIC 0x1D
-#define SCSIOP_MEDIUM_REMOVAL 0x1E
-#define SCSIOP_READ_CAPACITY 0x25
-#define SCSIOP_READ 0x28
-#define SCSIOP_WRITE 0x2A
-#define SCSIOP_SEEK 0x2B
-#define SCSIOP_LOCATE 0x2B
-#define SCSIOP_WRITE_VERIFY 0x2E
-#define SCSIOP_VERIFY 0x2F
-#define SCSIOP_SEARCH_DATA_HIGH 0x30
-#define SCSIOP_SEARCH_DATA_EQUAL 0x31
-#define SCSIOP_SEARCH_DATA_LOW 0x32
-#define SCSIOP_SET_LIMITS 0x33
-#define SCSIOP_READ_POSITION 0x34
-#define SCSIOP_SYNCHRONIZE_CACHE 0x35
-#define SCSIOP_COMPARE 0x39
-#define SCSIOP_COPY_COMPARE 0x3A
-#define SCSIOP_WRITE_DATA_BUFF 0x3B
-#define SCSIOP_READ_DATA_BUFF 0x3C
-#define SCSIOP_CHANGE_DEFINITION 0x40
-#define SCSIOP_READ_SUB_CHANNEL 0x42
-#define SCSIOP_READ_TOC 0x43
-#define SCSIOP_READ_HEADER 0x44
-#define SCSIOP_PLAY_AUDIO 0x45
-#define SCSIOP_PLAY_AUDIO_MSF 0x47
-#define SCSIOP_PLAY_TRACK_INDEX 0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE 0x49
-#define SCSIOP_PAUSE_RESUME 0x4B
-#define SCSIOP_LOG_SELECT 0x4C
-#define SCSIOP_LOG_SENSE 0x4D
-#define SCSIOP_MODE_SELECT10 0x55
-#define SCSIOP_MODE_SENSE10 0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6
-#define SCSIOP_MECHANISM_STATUS 0xBD
-#define SCSIOP_READ_CD 0xBE
-
-// SCSI read capacity structure
-typedef struct _READ_CAPACITY_DATA
- {
- ULONG blks; /* total blocks (converted to little endian) */
- ULONG blksiz; /* size of each (converted to little endian) */
- } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
- {
- UCHAR DeviceType :5;
- UCHAR DeviceTypeQualifier :3;
- UCHAR DeviceTypeModifier :7;
- UCHAR RemovableMedia :1;
- UCHAR Versions;
- UCHAR ResponseDataFormat;
- UCHAR AdditionalLength;
- UCHAR Reserved[2];
- UCHAR SoftReset :1;
- UCHAR CommandQueue :1;
- UCHAR Reserved2 :1;
- UCHAR LinkedCommands :1;
- UCHAR Synchronous :1;
- UCHAR Wide16Bit :1;
- UCHAR Wide32Bit :1;
- UCHAR RelativeAddressing :1;
- UCHAR VendorId[8];
- UCHAR ProductId[16];
- UCHAR ProductRevisionLevel[4];
- UCHAR VendorSpecific[20];
- UCHAR Reserved3[40];
- } INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect (Scsi_Host_Template *tpnt);
-int Pci2000_Command (Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort (Scsi_Cmnd *SCpnt);
-int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release (struct Scsi_Host *pshost);
-int Pci2000_BiosParam (struct scsi_device *sdev,
- struct block_device *bdev,
- sector_t capacity, int geom[]);
-
-#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
|
|